CIP length AICS will .300 Win Mag work?
- Thread starter scoobaman
- Start date
Scoobaman,
The .300 WIN magazine (P/N 0479) is shorter in length versus the .338 CIP (P/N 4808) and will not work in the CIP magazine aperture.
The .300 WIN magazine (P/N 0479) is shorter in length versus the .338 CIP (P/N 4808) and will not work in the CIP magazine aperture.
Yes 300 WM will fit and feed from 300 WM CIP mag. 300 Ultra and 338 Ultra also feed from CIP mag. I use 300 WM CIP mag for my 300 and 338 Ultras in a McRees stock. You have to cut the shoulder stop in the mag away for the ultras. Hope this helps and post if you need more info.
Yes, they make both a 300 WM and a 338 LM mags in the CIP, you can get them from McRees. I found the LM was to wide for the Ultra but the WM was better cuz the belt on a WM is the same Dia. as the body of the Ultra. If i'm not clear just keep asking.
Are you talking about locking into the chassis or the cartridge fitting? 300 win mags will lock into a 338 lm chassis.
How about for the 300 PRC? It wont fit in my Magpul LA AC L 300wm magazine. Does one need the 338lm CIP mag or just the 300wm CIP length?
For 300PRC, you have a couple choices:
- Use the 338 Lapua CIP length AICS mag and plan on bending the feed lips so it works properly
- Use a 3.850in 300wm AICS mag
Anyone able to find a CIP length mag that holds a capacity of 10 rounds of 300 wm?
For tactical application on an m40a5ish build.
For tactical application on an m40a5ish build.
