Competition training methods?

[hondo1312]

I have access to a 200 yard range in my father-in-laws backyard where I can leave props and barricades up year-round. Being only 200 yds, 1 and 2 moa targets are going to be awfully small size wise. I shot in 2 PRS matches last year, and I don't think any of the positional targets were much over 2 MOA.

Can I simulate shooting 400-600 yard shots at 200 yards by shooting at 4" and 6" steel targets at lower magnification on my scope?

Any input, serious or smartass, is greatly appreciated!

 

[Delta4-3]

If you have a wind generator....maybe.

 

[hondo1312]

If you have a wind generator....maybe.

Good point...

I guess at this point I'm concerned less with the wind and more with being able to build and maintain a solid position to keep my reticle on the target rather than bouncing all over the place. Maybe paper is the answer at 200 yards rather than steel?

 

[sled_mack]

That is the perfect range for using a 22 trainer. You will see the effects of wind at those distances, too. Along with having to range targets and dial accurately - the bullet is dropping like a rock at 200 yards!

 

[40xs]

The ballistics & trajectory are still going to be the same as with the smaller targets. you wont be changing anything. even with the scope dialed lower the larger target will look the same as the smaller one because it's a larger target with lower magnification. Sled and Delta has it right. train with wind and use a .22 at that distance.

 

[todd]

if you haven't already, you may want to try the Dot Drill at 100 and 200 yards. As you mentioned, they will be pretty small targets (start with 1 MOA at each distance). It gets you to practice with intent. Once you gain confidence, reduce the dots to 1/2 and even 1/4 MOA to raise the challenge level.

 

[hondo1312]

Thanks, Todd. I didn't think about the dot drill. That would be an excellent exercise to see the results of different ways of shooting off of props and barricades. I appreciate the suggestion!