Rifle Scopes contacted leupold about a mil/moa to mil/mil swap

[Jayne]

I contacted leupold about swapping the mil/moa setup I have on my mk 4 for a mil/mil setup with the M5 knobs. They replied:

<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">
There will eventually be an M5 adjustment retrofit. I cannot say at this time if your scope will accept the M5 adjustments as not all older Mark 4 scopes have verified that the M5 adjustments will work properly or not.</div></div>

So, no new info but I thought I would share since there were some old threads about conversion that died a while back. Guess it's still in the works at least.

 

[remau308]

Re: contacted leupold about a mil/moa to mil/mil swap

I was told that if the serial number ends on a number before V then they are still in the process of coming up with a solution to convert the MOA adjustments to Mil for the M5 knobs. If yours does end in V though, then they should be able to do it. They told me that about two months ago, and they said their engineers were getting close to coming up with a fix for the problem.

 

[bkrupp]

Re: contacted leupold about a mil/moa to mil/mil swap

Thanks for sharing. I have one I would like to convert.