Couple of new builds using the new chamber cylinder system!

[JamieD]

Just wanted to post up some .308's we just finished using our new chamber cylinder system. It's only a three shot group, 168 FGMM - I'll be posting some more pics and groups and we move along. We have been working on the project and design for over two and half years now. January we finally received our U.S. patent - No. 9,541,343

Thanks for taking the time to look. More to come soon!


JamieD
Wolf Precision
www.wolfprecision.net


[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/www.snipershide.com\/shooting\/filedata\/fetch?filedataid=50170&type=thumb"}[/IMG2][IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/www.snipershide.com\/shooting\/filedata\/fetch?filedataid=50171&type=thumb"}[/IMG2][IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/www.snipershide.com\/shooting\/filedata\/fetch?filedataid=50172&type=thumb"}[/IMG2]

 

[Guy Montag]

Looking forward to seeing this Jamie, hopefully you'll have some video to share soon.

Early Spring, Summer for availability?

 

[Quarter Horse]

OK, I'm in. What does a chamber cylinder system involve?

 

[JamieD]

Hi Guy Montag - The chambers are available now in several calibers with more to be added soon.

Quarter Horse - The chambers are made completely separate of the barrel.

More info can be found the website. I will be posting some video's on the site soon as well explaining more about the hows and why.

Thanks,
JamieD
www.wolfprecision.net

 

[Greg Langelius *]

Bravo, very glad somebody made this Idea work. Thought about this and even talked about it a little, but the credit goes to the folks who made it work. Well done.

Greg

 

[JamieD]

Thanks Greg,
We will be offering a free class coming up soon on assembling and maintaining rifles using our system. It will be held at Seven Springs Mountain Resorts on April, 22. Give a chance to come check out the system, ask questions and see how they are built. Really looking forward to getting out and shooting some matches this year as well. I'll be posting upcoming events on our site for guys that would like to come and see it for themselves.

JamieD
Wolf Precision
www.wolfprecision.net

 

[Greg Langelius *]

Jamie, would dearly love to take you up on that, but it would have been far easier for me to do it a year back, when we still lived in Central NY. Since Memorial Day. we've been living in SE Arizona.

But I have zero doubts about the system and its potential. Best fortune to you as you forge a new chapter in rifle design.

Would it be an impossible dream to want to see a barrel nut incorporated sometime in the future? That would put the icing on my cake.

Greg

 

[2c1fr]

Op very cool idea looks like you are trying to improve the mouse trap!

 

[Canuck1977]

Really interesting

 

[GhengisAhn175]

Adding more concentricity concerns,would not make me warmer or fuzzier.

But you have 100's and 100's of barrels in your collection and do load development in 5 rounds or less.
surely you should be able to test it and tell us the good or bad on the system

 

[cav has been]

Glad to see you are back!

 

[JamieD]

Thanks Cav.

Wanted to post something more than our three shot group above. The below was shot 100 yards off a harris bi-pod and rear bag.

Here is a ten shot group from my 6.5x47
first pic - first 5 rounds
second pic - ten rounds
third pic measured

JamieD

 

[PimpAvogadro]

How much is the chamber cyclinder so I can start saving?

 

[JamieD]

They are $385 each. Right now we offer them for the several Bat line of actions and just started for the Remington 700. All short action calibers at this time,

Thank you,
JamieD

 

[diverdon]

Do you offer barrels to go with the cylinders?
I feel like this is a dumb question but what is the idea here? Is this so you can:

1) Preserve your cylinder when the barrel is shot out
2) Shoot different cartridges through the same barrel, ie 6.5 Creedmore and .260 Rem
3) Help the gunsmith properly headspace the cartridge

If you are not also providing the barrels then as a teaser for your seminar could you describe how the gunsmith using the chamber cylinder system will insure perfect alignment between the chamber cylinder and the barrel bore.

The group posted is a very nice group, but what exactly is the advantage of the Chamber Cylinder System to the shooter?

 

[JamieD]

Thanks for asking some great questions. I guess all the above would be the answer. We launched Synergy Arms www.synergyarms.net about a week ago. That will be the division that will handle the chamber system. You can read more on the cylinder's there. There will also be some tutorials and videos being posted soon. Because of the patent and that a lot of what we do it intellectual property not all details on how we developed or how we make the system will be disclosed. The one thing that I think you will be very pleased with is how well they shoot. We have many more ten shot groups that are just as nice. Hopefully you'll get to check one out in person somewhere soon.

JamieD
www.synergyarms.net
www.wolfprecision.net

 

[JamieD]

Just wanted to announce our new site www.SynergyArms.net and our new line of rifles. We will be adding some video tutorials on the site soon going over a lot of the advancements made with the chamber cylinder and things it has improved. I will post once they are up in a month or so. Here is a rifle just gave away at ASC spring match in 6.5 Creedmoor.

Thanks,
JamieD
Synergy Arms
www.SynergyArms.net