Crescent Customs "the Beiber"

[bohem]

Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AJ Goddard</div><div class="ubbcode-body">Yes cunthairs are a standard unit of measure. It's just something I don't work in that often.

</div></div>

LMAO... that's the picture that I was looking for and couldn't find it with the office firewall

 

[dogman]

Re: Crescent Customs "the Beiber"

It's got that new hooker smell everyone loves.

 

[Shapeshifter]

Re: Crescent Customs "the Beiber"

Great looking rifle! Can't wait for Moon to finish up my 260 Remington.

 

[Bloody_Tailgate]

Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bob L. Swagger</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AJ Goddard</div><div class="ubbcode-body">Yes cunthairs are a standard unit of measure. It's just something I don't work in that often.

</div></div>

God dang! 30 cunt hairs to an inch?? I can't believe I have been that inaccurate all these years...
</div></div>

Actually there's 35CH/in, but no use splitting hairs.

 

[Twitch2120]

Re: Crescent Customs "the Beiber"

unless they are red cunt hairs. its kinda like saying that last 1000th doesn't count.

 

[AJ_Goddard]

Re: Crescent Customs "the Beiber"

I believe cunthairs are similar to tons there are several standards. The US ton also known as the short ton, the British ton known as a long ton, and the Metric ton. So when working in cunthairs it is best not to work in different ones at the same time as it is easy to get into trouble. If you get caught working in the wrong ones it can lead to many problems. As mentioned by Bohem red head cunthairs are finer. I personally wouldn’t know as I have never had the opportunity to work in them. I did see a post in Maggie’s Drawers the showed some red heads and I have to say they did look mighty fine. But this discussion is something that probably should be found in Maggie’s Drawers. We don't want to hijack this thread on such a fine build as the Beiber.

 

[VJJPunisher]

Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bohem</div><div class="ubbcode-body">That's a very cool little rifle, I'm tempted to leave the paint as it stands now but knowing how ARP's work comes out, I'm sure it will look just as cool as it shoots. Any idea on overall weight with the USO on there?

Your user title is always good for a laugh...</div></div>

Weighed it last night, with scope and mag it's 10.2 pounds, a little heavier than planned, guess off to Chicago to donate to the next police gun turn in

 

[bohem]

Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VJJPunisher</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bohem</div><div class="ubbcode-body">That's a very cool little rifle, I'm tempted to leave the paint as it stands now but knowing how ARP's work comes out, I'm sure it will look just as cool as it shoots. Any idea on overall weight with the USO on there?

Your user title is always good for a laugh...</div></div>

Weighed it last night, with scope and mag it's 10.2 pounds, a little heavier than planned, guess off to Chicago to donate to the next police gun turn in </div></div>

What a fat pig... well, I'm hesitant to offer but I'll give you $150 for it. Better than what the Shitcongo Gun-grabbers will give you for it.

Maybe I can make a cool lamp out of it or something.

 

[Inogame]

Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VJJPunisher</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bohem</div><div class="ubbcode-body">That's a very cool little rifle, I'm tempted to leave the paint as it stands now but knowing how ARP's work comes out, I'm sure it will look just as cool as it shoots. Any idea on overall weight with the USO on there?

Your user title is always good for a laugh...</div></div>

Weighed it last night, with scope and mag it's 10.2 pounds, a little heavier than planned, guess off to Chicago to donate to the next police gun turn in </div></div>

PM'd with Chicago Address for next "turn in" Never mind that I live there.

 

[VJJPunisher]

Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Nuttshooter</div><div class="ubbcode-body">VJJ,

could you show us a better picture of the front mount and sight. This is a freaking awesome rifle. </div></div>

forgot to get the actual sight but google international olympic globe and thats that

 

[Nuttshooter]

Re: Crescent Customs "the Beiber"

Thanks for the photo. That is pretty slick. Moon is a good dude and does some fine work.

 

[VJJPunisher]

Re: Crescent Customs "the Beiber"

Anyone got any subsonic load ideas or recipes for a beebs? Shot some 208's yesterday with 11.5 and 12.0 grs of trail boss and them bitches be tumbling though the air all ninja star like

 

[762frmafr]

Re: Crescent Customs "the Beiber"

220 round nose....

 

[AXEMAN]

Re: Crescent Customs "the Beiber"

thats badass. i like the sights

 

[105amatt]

Re: Crescent Customs "the Beiber"

I found a source for the magical Beiber dust.

 

[backyardsniper]

Re: Crescent Customs "the Beiber"

VJJ you are often the reason I find myself drinking one more beer and reading one more post at 3 in the FN morning when I get off work. That is a sweet rifle. I have a question though. Are you going to use the "Hundered Yard Sight in Method" for the Beib. I'm working on my first crescent custom. The 243 that osuarchitecht has in the classifieds. I really like that rifle. Mostly I like not having to wait to have one built

 

[VJJPunisher]

Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: backyardsniper</div><div class="ubbcode-body">VJJ you are often the reason I find myself drinking one more beer and reading one more post at 3 in the FN morning when I get off work. That is a sweet rifle. I have a question though. Are you going to use the "Hundered Yard Sight in Method" for the Beib. I'm working on my first crescent custom. The 243 that osuarchitecht has in the classifieds. I really like that rifle. Mostly I like not having to wait to have one built</div></div>

actually no, i just read on here ive been doing it wrong, im gonna develop a load for the beeber at 10 yards, 20 yards, 34 yards, 48 yards, 51 yards, and then try my luck at 100 yards

 

[VJJPunisher]

Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bohem</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VJJPunisher</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bohem</div><div class="ubbcode-body">That's a very cool little rifle, I'm tempted to leave the paint as it stands now but knowing how ARP's work comes out, I'm sure it will look just as cool as it shoots. Any idea on overall weight with the USO on there?

Your user title is always good for a laugh...</div></div>

Weighed it last night, with scope and mag it's 10.2 pounds, a little heavier than planned, guess off to Chicago to donate to the next police gun turn in </div></div>

What a fat pig... well, I'm hesitant to offer but I'll give you $150 for it. Better than what the Shitcongo Gun-grabbers will give you for it.

Maybe I can make a cool lamp out of it or something.</div></div>

I think I'd be hammering you a little too much on that deal, plus it's probably not even worth the amount it'll cost to ship it since its so fucking heavy

 

[bohem]

Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VJJPunisher</div><div class="ubbcode-body">Anyone got any subsonic load ideas or recipes for a beebs? Shot some 208's yesterday with 11.5 and 12.0 grs of trail boss and them bitches be tumbling though the air all ninja star like </div></div>

Might want to give a shot at the 180 RN's, 2.65" OAL to take up case capacity and start around 12.0gr, back down in 0.2gr increments and see how ti does. The 10tw should handle the 220RN's without a sweat, but if not then the 180's would be a known performer.

If you can't get that to work for some reason, I know that a 12tw will handle the 150 PSP's at 2.700 over 9.5gr Trailboss and they're right about 995fps. Super quiet, I load them on the progressive with the pistol powder insert in the powder thrower.

 

[VJJPunisher]

Re: Crescent Customs "the Beiber"

i got some 220's this weekend im gonna run, will try em out and if any problems arise i'll try out those 180's thanks brother

 

[bohem]

Re: Crescent Customs "the Beiber"

10-4, hit me up if you have trouble with them.

 

[Mike0341]

Re: Crescent Customs "the Beiber"

thats nice looking stick. I've heard rumors that cutting from a 20 inch to a 18 inch doesn't affect muzzle velocity that much (i think they started with a 24 inch barrel and cut an inch at a time and choreographed the shots).

i can't remember where i read it at but i think i came across it when researching the XM3.

 

[VJJPunisher]

Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mike0341</div><div class="ubbcode-body"> and choreographed the shots).
</div></div>

this an olympic sport? choreographed bullet dancing?

 

[VJJPunisher]

Re: Crescent Customs "the Beiber"

Bieber Mcfancypants has been shipped to ARP

 

[O_W]

Re: Crescent Customs "the Beiber"

well we hope ARP shows us the pics before he send it to you. I hear he has something "special" in mind for you.

 

[Iggy]

Re: Crescent Customs "the Beiber"

I don't know if you listed it before, but what reamer are you using for those 208's?

 

[RedGoat]

Re: Crescent Customs "the Beiber"

Yes tell us VJJ about how you reamed out the Beiber....

 

[digger9523]

Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: THEBEARRRRRRJEW</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VJJPunisher</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body"> Any idea on overall weight with the USO on there?</div></div>

not exactly but with 8.4 before i think its just a cunthair shy of 10 lbs, i'll weigh it tonight and see </div></div>

I'm not sure a cunthair is a standard unit of measure

</div></div>

Yeah it is, it's an old Imperial measuring standard. One thousandth of a cunthair is a Knatscock

 

[VJJPunisher]

Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Iggy.</div><div class="ubbcode-body">I don't know if you listed it before, but what reamer are you using for those 208's?</div></div>

To be honest I have no clue, just said I was planning on running mainly 208's and moon did her up

 

[ARP]

Re: Crescent Customs "the Beiber"

I know that this isn't the best picture in the world, but it will give an idea of the current status of theBieber. Keep in mind that this is a work in progress and it is only gonna get better. Final result will be equivalent to the bad mouthing VJJ done to me before he shipped this. He may have forgot about running his pie hole, but ARP never will ......

Ad spaces for sale on the rifle. Contact for details ....

 

[VJJPunisher]

Re: Crescent Customs "the Beiber"

i have tears in my eyes...............of joy

 

[PatrickChewing]

Re: Crescent Customs "the Beiber"

Oh my....perfect. I love it when a plan comes together!

 

[105amatt]

Re: Crescent Customs "the Beiber"

So much WIN!

 

[O_W]

Re: Crescent Customs "the Beiber"

The bestest

 

[Tyler Kemp]

Re: Crescent Customs "the Beiber"

oh my god

 

[KYS]

Re: Crescent Customs "the Beiber"

Oh no

 

[VJJPunisher]

Re: Crescent Customs "the Beiber"

oh yes

 

[Chiller]

Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ARP</div><div class="ubbcode-body">I know that this isn't the best picture in the world, but it will give an idea of the current status of theBieber. Keep in mind that this is a work in progress and it is only gonna get better. Final result will be equivalent to the bad mouthing VJJ done to me before he shipped this. He may have forgot about running his pie hole, but ARP never will ......

Ad spaces for sale on the rifle. Contact for details ....

</div></div>

 

[jasonk]

Re: Crescent Customs "the Beiber"

I'll pay $20 for an "I (heart) jasonk" on the side.

 

[KLin]

Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VJJPunisher</div><div class="ubbcode-body">I'm not homophobic, some of my best rifles are gay.</div></div>

 

[quacktastic]

Re: Crescent Customs "the Beiber"

Every time he shoots it, VJJ gets a little kiss on the cheek. How perfect. Can't wait to see how sloppy Justin gets when covered in chin sweat

 

[Frankr]

Re: Crescent Customs "the Beiber"

Oh the horror. Such a "pretty" rifle is going to be used and abused by vjj and he will like it. Please more pics is said rifle being used

 

[Possum]

Re: Crescent Customs "the Beiber"

The pictures do that rifle no justice! Its even more Beiber-iffic in person

 

[RedGoat]

Re: Crescent Customs "the Beiber"

Any update on the 220RN subsonic loads?????

 

[KYS]

Re: Crescent Customs "the Beiber"

I have $25.00 for "GAP 1911 MOD1" to go on the rifle!

 

[VJJPunisher]

Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RedGoat</div><div class="ubbcode-body">Any update on the 220RN subsonic loads?????</div></div>

rounds are loaded, just waiting to get rifle back from arp

 

[Josh Ward]

Re: Crescent Customs "the Beiber"

Very slick little rifle !!

 

[Huckleberry75]

Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VJJPunisher</div><div class="ubbcode-body">i got some 220's this weekend im gonna run, will try em out and if any problems arise i'll try out those 180's thanks brother </div></div>

Try 12.2gns of TB with the 220rn. They shoot mighty fine in my boatanchor AAC. Seems to clock about 1036fps out of LC brass and damn near any primer I can stuff in them. Nothing fancy on seating, just stuck it in until it kissed the cannelure and called it good.

Let us know how that dirty little cur shoots 'em.

 

[sr15match]

Re: Crescent Customs "the Beiber"

It's a wonder one of the big name builders hasn't decided to take this as a new platform for a new model and introduce it at SHOT this coming year!

Be the next big hit to be on everyons "Must Have" short list!

 

[VJJPunisher]

Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sr15match</div><div class="ubbcode-body">It's a wonder one of the big name builders hasn't decided to take this as a new platform for a new model and introduce it at SHOT this coming year!

Be the next big hit to be on everyons "Must Have" short list!</div></div>

I could see this selling as a production gun, only thing make it better would be a side folder stock, only reason I didn't was cost