Crescent Customs "the Beiber"

Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VJJPunisher</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sr15match</div><div class="ubbcode-body">It's a wonder one of the big name builders hasn't decided to take this as a new platform for a new model and introduce it at SHOT this coming year!

Be the next big hit to be on everyons "Must Have" short list!</div></div>

I could see this selling as a production gun, only thing make it better would be a side folder stock, only reason I didn't was cost </div></div>

The GAP 223 I run is a 16.25" barrel in a Manners TF1. It is a pretty sweet setup with the EFR and AAC suppressor.
 
Re: Crescent Customs "the Beiber"

VJJ, are those velocities you listed in the first post with or without a can? My next build is going to be a shorty 308, but I didn't want to go shorter that 18.5". Your build gives me inspiration to go 16.5"...
 
Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dk-1</div><div class="ubbcode-body">VJJ, are those velocities you listed in the first post with or without a can? My next build is going to be a shorty 308, but I didn't want to go shorter that 18.5". Your build gives me inspiration to go 16.5"... </div></div>

I re-read your first post and saw the can was pending for now.... Those are very impressive velocities for a 308 with a 16.5" barrel! I'm going to start the search for the needed components for a similar build. Thanks for the inspiration!
 
Re: Crescent Customs "the Beiber"

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dk-1</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dk-1</div><div class="ubbcode-body">VJJ, are those velocities you listed in the first post with or without a can? My next build is going to be a shorty 308, but I didn't want to go shorter that 18.5". Your build gives me inspiration to go 16.5"... </div></div>

I re-read your first post and saw the can was pending for now.... Those are very impressive velocities for a 308 with a 16.5" barrel! I'm going to start the search for the needed components for a similar build. Thanks for the inspiration!</div></div>

Velocities were without can, the can in the pic is actually a 223 can I put on for an idea of what it'll look like. I like to report that the 30 cal can was approved sept 9th and just waitin on stamp to show up at gap
 
You must be at least 18 years of age to use this site
You confirm that you are at least 18 years of age by continuing to use the site.