Firearms Curtis Vector / 5x5 Precision BA 223 $1325

[Btrain]

This is a catch and release for me... Its a Curtis Vector action spun up by 5x5 precision in 223 W/Trigger Tech trigger. I was told by the original owner that all was new when put together and has less than 60 rnds on it. To me - It looks very clean and everything is very smooth. I think I paid $1,650 shipped

I bought it here on the hide awhile back with the intent to build a 223... Have seen other 5x5 stuff and it Hammers, so was excited to get it but never got around to the build.


Needs a new home. $1,450 LAST PASS $1,325 Plus actual cost of shipping/ins

Thanks for looking

Possible trades +/- cash (only interested in fair to both)
-HK MR223
- NL Pure Bino's
- ? (Don’t be afraid to throw something out / Don’t be offended if I pass)

 

[BiggBeans]

Barrel length and twist?

 

[Btrain]

Well, a little embarrassing... The barrel is 23" from the lug to crown as shown, but I don't see the twist marked on it - Not sure how to determine that

 

[ARShooter91]

Put a piece of masking tape on your cleaning rod about 2ft from the tip, sharpie a reference line, insert in barrel with a patch as if you were cleaning, once you time the sharpie line at 12 o clock or whatever measure distance to ejection port, push the rod in until you get 1 full rotation and measure the difference.

Should get you close enough to tell a 1:7 or 1:8 etc

 

[Btrain]

Thanks for the assist / ARShooter

1 : 8 Twist as measured

 

[Btrain]

Lowered

 

[Btrain]

Lowered

 

[BassNbrass]

pm sent