Accessories Curtis Vector Prefit barrels PRICES REDUCED

[Nfrantz87]

I have 3 barrels for a Curtis vector action. Info is in the pics. All have 5/8-24 muzzle threads and are 26" all prices are obo.

6.5 Creedmoor sold

.308 sold

6 Creedmoor $350 shipped

 

[westcoasteast]

Hand tight?

 

[Nfrantz87]

Hand tight?

What are you referring to?

 

[westcoasteast]

What are you referring to?

vector barrels can be cut for installing hand tight then torquing set screws, or by torquing the barrel itself

 

[Nfrantz87]

vector barrels can be cut for installing hand tight then torquing set screws, or by torquing the barrel itself

I did not know this. The action has set screws in it.

 

[JfarmshooterW]

Have you been changing barrels by hand or with a barrel vise?

 

[Carwash31]

From looking at the pictures they are hand tight barrels because they are not threaded all the way up. All my hand tight barrels have a small gap next to the shoulder with no threads where the set screws clamp on and my torqued barrels are threaded all the way to the shoulder.

 

[Nfrantz87]

Have you been changing barrels by hand or with a barrel vise?

I bought the action for a build I'm doing. I have no use for the barrels so selling them. I never changed them. The barrel that was mounted spun right off figured it was loose. So maybe it was just hand tight.

 

[Nfrantz87]

From looking at the pictures they are hand tight barrels because they are not threaded all the way up. All my hand tight barrels have a small gap next to the shoulder with no threads where the set screws clamp on and my torqued barrels are threaded all the way to the shoulder.

Yes they have a ring where the set screws hold. The action doesn't have threads there so threading it all the way wouldn't gain anything.

 

[JfarmshooterW]

My barrels from paradigm are not full thread but they are torqued. Not hand tight.

 

[JfarmshooterW]

Typically you have full thread, hand tight, or torqued options when getting vector barrels.

 

[Nfrantz87]

Willing to make a package deal also.

 

[JfarmshooterW]

I’m interested in one of the barrels but I’d like to have conformation on how exactly they’re headspaced. I only torque mine so I prefer that it’s headspaced to be torqued.

 

[Nfrantz87]

I have no way of knowing unless someone can confirm how to tell the difference. From what has been said here I'm guessing they are hand tight.

 

[JfarmshooterW]

10/4 no worries

 

[westcoasteast]

I have no way of knowing unless someone can confirm how to tell the difference. From what has been said here I'm guessing they are hand tight.

check head space with gauges after hand tightening is one way. Otherwise a smith could tell you. Regardless, look into it and you may want to have what ever youre building cut for hand tight. Swap out barrels/calibers. I like the idea, others dont.

 

[Nfrantz87]

Contacted previous owner. He said you can hand tighten or torque.

 

[Nfrantz87]

Bump

 

[Nfrantz87]

To the top. Reasonable offers.

 

[Nfrantz87]

Prices reduced

 

[Nfrantz87]

Ttt

 

[Nfrantz87]

Prices reduced again

 

[Jerry V]

Funds sent on .308 per our PM

 

[Nfrantz87]

Still have the 6 CM barrel and just the EC tuner available.

 

[Lance Darkhorse]

How much for the tuner

 

[Nfrantz87]

How much for the tuner

$150 shipped

 

[Kegjohn]

How many rounds on the barrel that is left. Thanks John

 

[Kegjohn]

Disregard got the pictures to load.

 

[Rcornell27]

6 creed still available?