Custom 6.5 CM built off Savage Model 12 action?

P

p3ripperfw

Private
Minuteman
Aug 5, 2012
89
0
41
Fort Worth, TX
#1
Sorry if this has been discussed already but I searched a lot and couldnt find what I was looking for.

After debating on caliber and weapons for my new bolt gun I think Im pretty set on either building or purchasing a 6.5 Creedmoor rifle. I had debated this round against the .308 and 7MM Rem-mag. 6.5 sounds like the round that's perfect for me.

My plan is to buy a Model 12 action from Savage. It will run me $615 and come with the Target accutrigger, bolt, and receiver.

I was then going to get a Krieger barrel in 20-22" length threaded for a muzzle brake.

I plan on putting it in either a Bell and Carson stock or if I can make myself wait a manners T5A.

I want bottom metal that will allow the use of the AI box mags but this is where I run into confusion. Will I be able to use CDI, Badger, or any of the other bottom metals on the aftermarket stocks for the Savages? I understand that there may need to be some inletting but by the descriptions given on the manufacturers websites for this bottom metal it is difficult to understand whether it works on aftermarket stocks or just factory based stocks.

I've not seen many weapons like this and Savage has less aftermarket support than say the Rem 700 does. I don't want to get stuck with a gun that I cannot get parts for or aftermarket accessories for but I believe the Savage is going to have less issues and have a better trigger than the Remington so I would like to build off this receiver. Plus the ability for me to switch barrels on my own is a huge plus for me.

Also will I need to purchase a recoil lug or will it be supplied with the barrel or receiver?

Can yall think of anything Im over looking or not taking into consideration? I plan on assembling this rifle myself with the exception of a few small things I may need a gunsmith to do. Does this sound feasible?

Thanks in advance.
 
#2
Re: Custom 6.5 CM built off Savage Model 12 action?

There is no reason not to go with your plan, that is, if you are happy with a savage action.

The B&C is a decent stock, but heavy.
I have a model 12 in a B&C with a lothar walther .308 barrel. Jeff at CDI will inlet it for you with his bottom metal.

Personally, if you can afford it, wait for the manners and get it with the mini chassis.

Another option is an XLR chassis. I have one of those as well, it is awesome.

I would recommend 24" for barrel length, but that is just me.
 
#3
Re: Custom 6.5 CM built off Savage Model 12 action?

Savage LRP 6.5 CM. Absolute hammer. The barrels used on the LRP are as good as custom barrels. You get the target action and target accutrigger to boot.
 
#4
Re: Custom 6.5 CM built off Savage Model 12 action?

Save the money and get what you want, whatever that might be. I ran a Choate for a while on my Savage and liked it until I got my McM. Don't get me wrong the Choate shot fine, but the McM just feels better. Manners can be bought inletted for CDI BM, or just send whatever you get to Jeff and he can take care of it for you.

I'm a Savage fan, so your plan sounds good to me. I like to go a little longer on the barrels then most, but thats just me. It is easier to cut down than it is to add though...
wink.gif
 
#5
Re: Custom 6.5 CM built off Savage Model 12 action?

Get the Manners and have them inlet for CDI, or the factory Savage dbm. Accurate mag makes a DBM that fits the factory inlet.

I added the Accurate mag set up to my 12LRP 6.5 Creedmoor (which came with the factory dbm), it was nearly drop in and looks great.
 
#6
Re: Custom 6.5 CM built off Savage Model 12 action?

There are LOTS of home-built, Savage-based tactical rifles here on the Hide...here's my 6.5mm - its a 260.

IMG_1009.jpg


$615 for an action directly from Savage is highway robbery IMO - I'd definitely buy a LRP before doing that.

Call Jim Briggs @ Northland Shooter Supply and get a non-designated Varmint action (same exact thing as a Model 12) from him for $460. I'd also recommend one of his aftermarket stainless recoil lugs, although the factory lug that comes with the action will probably be okay.

While you're on the phone with Jim, buy a Criterion prefit barrel. Criterion is the button-rifled division of Krieger and they have a STELLAR reputation for accuracy. My 260 is a Criterion, and I've got a 223AI barrel on order right now. I think Jim stocks 26" varmint contour 6.5 Creedmoors, and you could either buy one and send it off to be cut/recrowned/threaded or order a barrel from Criterion to your exact specs and get it in 6-12 weeks.

Buy an A2 Medalist stock from Red Hawk Rifles, and send it to Jeff @ CDI to be inletted for his excellent DBM so you can shoot right now. Order your Manners at the same time, already inletted for the CDI (Tom doesn't make a Savage mini-chassis). When the Manners is ready 4 months from now, throw the DBM into the Manners and sell your Medalist for a small loss.

If ya need help putting yours together, there's plenty of help here to be had.

Good luck!
 
#8
Re: Custom 6.5 CM built off Savage Model 12 action?

Rather than drop $615 for just the action you can buy a Savage model 12 in 6.5CM for $891 and get a surprisingly good barrel, DBM that can be upgraded by RatMag for much less than a AICS mag and an HS precision stock.

http://www.budsgunshop.com/catalog/product_info.php/products_id/71097/Savage+12LRP+6.5"+CREEDMOOR

If you decide that you don't like the HS stock you can sell it and have a barreled action for less than buying just the action from Savage.
 
#9
Re: Custom 6.5 CM built off Savage Model 12 action?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 2brothers641</div><div class="ubbcode-body">Savage LRP 6.5 CM. Absolute hammer. The barrels used on the LRP are as good as custom barrels. You get the target action and target accutrigger to boot. </div></div>

You would definitely come out ahead this way and selling the HSP stock, and possibly barrel if you really wanted Krieger and could find a buyer for a barrel. Then you still have all the other parts but it's more work.

I am currently in the process of this sold my stock for 250 but the barrel shoots really well so I'm keeping it. I'm getting the XLR chassis.
 
#10
Re: Custom 6.5 CM built off Savage Model 12 action?

Building an accurate 6.5 off of a savage action is actually pretty easy. Instead of buying a target action you could just get a stevens action (which is what alot of rightys do) order a McMillian, Manners, XLR, etc and have them inlet it for cdi(no need for dbm on XLR) then throw a Criterion barrel on it from Jim Briggs and get one of his recoil lugs. and then youre all set.

I think I have a few pictures of mine around SH, just check my posts. If not I can send you some.
 
#12
Re: Custom 6.5 CM built off Savage Model 12 action?

I bought a new Savage LRP in 6.5 CM from Jim at NSS. I was going to use this for a project similar to the one you have in mind but have decided to go a different direction. Sending PM with some thoughts.

Good luck with your project...
cool.gif
 
#13
Re: Custom 6.5 CM built off Savage Model 12 action?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Shredder58</div><div class="ubbcode-body">I bought a new Savage LRP in 6.5 CM from Jim at NSS, never fired except at the factory. I was going to use this for a project similar to the one you have in mind but have decided to go a different direction. I sold off some parts and still have the brand new barreled action, with accutrigger and barrel lug, available for a fair price. Sending PM with details.

Good luck with your project, whatever you decide...
cool.gif
</div></div>


My soon to be 7wsm is a Left port target action. I am having CDI machine out the action, so I can use AICS mags with it. It will be a SWEET little setup when its done. Right hand bolt, left port, 27" oby barrel.
 
#14
Re: Custom 6.5 CM built off Savage Model 12 action?

Sorry I cant tell what your trying to say. Nutless?<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Cypriss32</div><div class="ubbcode-body">I have a few savages...... I went nutless, wont ever go back the other way. Oby and rock tubes, 7wsm and 223AI. </div></div>
 
#15
Re: Custom 6.5 CM built off Savage Model 12 action?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: p3ripperfw</div><div class="ubbcode-body">Sorry I cant tell what your trying to say. Nutless?</div></div>

No barrel nut - barrel instead installed with a shoulder, ala Remington.
 
#16
Re: Custom 6.5 CM built off Savage Model 12 action?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: p3ripperfw</div><div class="ubbcode-body">I had debated this round against the .308 and 7MM Rem-mag. 6.5 sounds like the round that's perfect for me.

</div></div>

Do you reload? Why not a .260 instead? 6.5 Creed is great in a AR10/gas gun where you're mag limited to a 2.80 COAL but with Savage bolt action you have more room, up to 2.98ish allowable COAL with Alpha Mags. You're leaving a little bit of horsepower on the table ...Just my .02

http://www.gunsumerreports.com/review_alpha_industries_type-2_10-shot_magazine_p1.php
 
#17
Re: Custom 6.5 CM built off Savage Model 12 action?

So does that still allow me to remove and exchange the barrel on my own like with the savage?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BoilerUP</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: p3ripperfw</div><div class="ubbcode-body">Sorry I cant tell what your trying to say. Nutless?</div></div>

No barrel nut - barrel instead installed with a shoulder, ala Remington.</div></div>
 
#18
Re: Custom 6.5 CM built off Savage Model 12 action?

I plan on reloading after I get this gun built. As of yet no I do not.<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: CrawDad338</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: p3ripperfw</div><div class="ubbcode-body">I had debated this round against the .308 and 7MM Rem-mag. 6.5 sounds like the round that's perfect for me.

</div></div>

Do you reload? Why not a .260 instead? 6.5 Creed is great in a AR10/gas gun where you're mag limited to a 2.80 COAL but with Savage bolt action you have more room, up to 2.98ish allowable COAL with Alpha Mags. You're leaving a little bit of horsepower on the table ...Just my .02

http://www.gunsumerreports.com/review_alpha_industries_type-2_10-shot_magazine_p1.php
</div></div>
 
#19
Re: Custom 6.5 CM built off Savage Model 12 action?

Thats a really cool deal Thanks for showing that to me. Does anything change with my build if I did .260 instead of 6.5? Or will the rifle shoot the different ammunitions out the same barrel? Sorry if thats a dumb questions but Im absolutely just starting out so Im not clear on that difference yet. I saw the .260 barrell and creedmoor barrel both listed under 6.5mm barrels.

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: CrawDad338</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: p3ripperfw</div><div class="ubbcode-body">I had debated this round against the .308 and 7MM Rem-mag. 6.5 sounds like the round that's perfect for me.

</div></div>

Do you reload? Why not a .260 instead? 6.5 Creed is great in a AR10/gas gun where you're mag limited to a 2.80 COAL but with Savage bolt action you have more room, up to 2.98ish allowable COAL with Alpha Mags. You're leaving a little bit of horsepower on the table ...Just my .02

http://www.gunsumerreports.com/review_alpha_industries_type-2_10-shot_magazine_p1.php
</div></div>
 
#20
Re: Custom 6.5 CM built off Savage Model 12 action?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: p3ripperfw</div><div class="ubbcode-body">I plan on reloading after I get this gun built. As of yet no I do not.</div></div>

Nothing would change with your build just need a 260 barrel instead of a 6.5mm Creed barrel, .260 has better quality brass options for a cheaper price. Only Hornady makes 6.5mm Creed brass, it's pretty soft stuff. If you were leaning toward 6.5mm Creedmoor because of factory ammo Here's a decent .260 option by Southwest ($24.99), you would be left with better quality Winchester brass to reload.

http://www.southwestammunition.com/category_s/83.htm

Informative read that might help you out...
http://www.westernshooter.com/2009/12/how-to-build-or-rebarrel-savage-rifle.html

If you wanted to save a few bucks you could always buy one of these rifles and just change the stock.

This barrel is still rigid but light enough to hunt with http://www.budsgunshop.com/catalog/product_info.php/cPath/36_62/products_id/70995

Or if you were leaning more towards a heavy bench gun this guy is pretty sweet.
http://www.budsgunshop.com/catalog/product_info.php/products_id/71098/Savage+12LRP+260+REM
 
#21
Re: Custom 6.5 CM built off Savage Model 12 action?

260 and 6.5 Creedmoor are ballistic twins...one will not get noticeably more performance from one than they will the other.

I'm also not certain the guys here that have shot thousands of 6.5 Creedmoor reloads would agree that Hornady brass is "soft stuff". Okay, Hornady brass ain't Lapua, but it isn't priced like that either.

I'm as died in the wool a 260 shooter as they come (had one for over ten years) but if I were the OP and didn't reload the 6.5 Creedmoor would be my choice.

Either way, flip a coin...both get ya to the same place.
 
#22
Re: Custom 6.5 CM built off Savage Model 12 action?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BoilerUP</div><div class="ubbcode-body">260 and 6.5 Creedmoor are ballistic twins...one will not get noticeably more performance from one than they will the other.

</div></div>

I know it's splitting hairs ballistically and I like the Creedmoor too, the .260 has a pinch more powder capacity and I've heard from folks that own both calibers a .260 can be run about 60fps hotter, that could make up for a couple inches of barrel length.
 
#23
Re: Custom 6.5 CM built off Savage Model 12 action?

Let me explain to y'all my conundrum...I originally was going to build a .308 rifle. Then I started reading through the caliber sticky here and really liked what I saw with that Creedmoor round and ammo wasn't hardly any different than .308. I liked the faster velocity and flatter shooting, less recoil, and less wind effect of the 6.5.

I'm wanting to build a gun that I can go hunt hogs and deer with at the ranch so it needs to be somewhat manageable weight wise but I'm also wanting a weapon that is deadly accurate and capable or long range shots as well. Hence the want for a 22" barrel which im figuring will end up at about 24 inches long with a muzzle brake installed which I know does not equate to a 24" barrel but I need to get it in and out of brush and deer stands as well. I also like the tactical look with detachable larger magazines. I really like the Accutrigger, serviceability, and cost of the savage as compared to Remington.

So 260 or 6.5 with that criteria in mind?
 
#24
Re: Custom 6.5 CM built off Savage Model 12 action?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: p3ripperfw</div><div class="ubbcode-body">Let me explain to y'all my conundrum...I originally was going to build a .308 rifle. Then I started reading through the caliber sticky here and really liked what I saw with that Creedmoor round and ammo wasn't hardly any different than .308. I liked the faster velocity and flatter shooting, less recoil, and less wind effect of the 6.5.

I'm wanting to build a gun that I can go hunt hogs and deer with at the ranch so it needs to be somewhat manageable weight wise but I'm also wanting a weapon that is deadly accurate and capable or long range shots as well. I also like the tactical look with detachable larger magazines. I really like the Accutrigger, serviceability, and cost of the savage as compared to Remington.

So 260 or 6.5 with that criteria in mind?</div></div>

Both hit hard enough for hogs, deer, and yotes and will shoot inside of a .308, the lighter projectiles compared to .308 would mesh better recoil wise with a light gun. For 26 cents each Norma makes a 130 grain Golden target bullet with a G7 BC of .294, to get an idea of range for punching paper 3,000fps keeps it supersonic for 1,475 yards...
 
#25
Re: Custom 6.5 CM built off Savage Model 12 action?

That for norma round for .260 or 6.5?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: CrawDad338</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: p3ripperfw</div><div class="ubbcode-body">Let me explain to y'all my conundrum...I originally was going to build a .308 rifle. Then I started reading through the caliber sticky here and really liked what I saw with that Creedmoor round and ammo wasn't hardly any different than .308. I liked the faster velocity and flatter shooting, less recoil, and less wind effect of the 6.5.

I'm wanting to build a gun that I can go hunt hogs and deer with at the ranch so it needs to be somewhat manageable weight wise but I'm also wanting a weapon that is deadly accurate and capable or long range shots as well. I also like the tactical look with detachable larger magazines. I really like the Accutrigger, serviceability, and cost of the savage as compared to Remington.

So 260 or 6.5 with that criteria in mind?</div></div>

Both hit hard enough for hogs, deer, and yotes and will shoot inside of a .308, the lighter projectiles compared to .308 would mesh better recoil wise with a light gun. For 26 cents each Norma makes a 130 grain Golden target bullet with a G7 BC of .294, to get an idea of range for punching paper 3,000fps keeps it supersonic for 1,475 yards...</div></div>
 
#26
Re: Custom 6.5 CM built off Savage Model 12 action?

I was referring to just the Norma .264/.6.5mm bullet, food for thought if you plan on reloading. I don't think you can buy ammo preloaded with this projectile .260 remington and 6.5mm Creed use the same projectiles, same diameter...
 
#27
Re: Custom 6.5 CM built off Savage Model 12 action?

The 130gr Norma Golden Target is a bullet...they aren't made in factory loaded ammo for either the 260 or 6.5 Creedmoor. You gotta reload to use them...

I shoot the 130gr Goldens in my 26" Savage 260 pictured above; I'm still doing load development but appear to have an accuracy node around 2920fps and another around 2960fps. Had no problem reaching 3000fps using 42.5gr RL17, but accuracy wasn't there (and this load hammered with 130gr Bergers).

It hasn't been quite as easy finding a load for these as it was for the Bergers (or 140gr A-Max, for that matter) but the Normas do shoot well.

Seriously, the 260 and 6.5 Creedmoor are the same basic thing in different packaging...flip a coin.
 
#28
Re: Custom 6.5 CM built off Savage Model 12 action?

If thats the case then Ill probably go with the round that has the most readily available ammo...At this point I dont reload so I will need some factory ammo to get started and if Im going to go to the ranch to plink or play Ill probably want to shoot just factory ammo. Sounds like the .260 is my better option for that.

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BoilerUP</div><div class="ubbcode-body">The 130gr Norma Golden Target is a bullet...they aren't made in factory loaded ammo for either the 260 or 6.5 Creedmoor. You gotta reload to use them...

I shoot the 130gr Goldens in my 26" Savage 260 pictured above; I'm still doing load development but appear to have an accuracy node around 2920fps and another around 2960fps. Had no problem reaching 3000fps using 42.5gr RL17, but accuracy wasn't there (and this load hammered with 130gr Bergers).

It hasn't been quite as easy finding a load for these as it was for the Bergers (or 140gr A-Max, for that matter) but the Normas do shoot well.

Seriously, the 260 and 6.5 Creedmoor are the same basic thing in different packaging...flip a coin.</div></div>
 
#29
Re: Custom 6.5 CM built off Savage Model 12 action?

It can be tough to make all the decisions, at some point you might even find yourself second guessing your decisions. I was at the same point you are a few months ago, luckily I got some good advise and it worked out very well.

If you open to chassis stocks look at the McRee aluminum chassis. It has almost infinite adjustments, which makes fitting easy. You have the ability to hang all kinds of light and other accessories. There is no bedding to worry about, which means you can change barreled actions with removing 2 screws. As for the other items barrels, Kreiger are tough to beat, action depends on your net worth. Surgeon is the big boys favorite, scopes NF, Vortex are forums favorites.

My 6.5 CM will shoot sub .5 MOA at 200yds off a bipoid. Its built on a stock R700 action even with me shooting it.
 
#30
Re: Custom 6.5 CM built off Savage Model 12 action?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: CrawDad338</div><div class="ubbcode-body"> <span style="font-weight: bold"><span style="text-decoration: underline">I've heard from folks</span></span> that own both calibers a .260 can be run about 60fps hotter, that could make up for a couple inches of barrel length. </div></div>

Key words!

And I love when the brass issue comes up!! Did you hear that also?

Yes, when the Creedmoor first came out the brass would only hold 2-3 loads before the pockets wouldn't hold. Hornady listen to their customers and fixed the problem. The brass now is perfectly fine and you won't find better brass for a .260 in the same price range. I have 10 loads on brass right now and still going strong.

Again flip a coin. If you want the Creed go with it and don't let people talk you out of it just because of what they HEAR or READ on the internet!!

Plus the Creedmoor just looks sexier then a .260 will!
grin.gif



Boilerup: Is yours the varmint or bull?
 
#31
Re: Custom 6.5 CM built off Savage Model 12 action?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: p3ripperfw</div><div class="ubbcode-body">If thats the case then Ill probably go with the round that has the most readily available ammo...At this point I dont reload so I will need some factory ammo to get started and if Im going to go to the ranch to plink or play Ill probably want to shoot just factory ammo. Sounds like the .260 is my better option for that.
</div></div>

Again I tend to disagree on this! Go around to the stores and look around. Until you can find Match quality ammo for $25/20 for the .260 that can be bought at a store. Price the .260 ammo compared to the Creedmoor.

Also the .260 is at a disadvantage if your sticking to factory loaded ammo. You have to reload for it to have a tiny leg up over the Creedmoor.
 
#32
Re: Custom 6.5 CM built off Savage Model 12 action?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dmpowder</div><div class="ubbcode-body">Boilerup: Is yours the varmint or bull? </div></div>

Varmint contour.

Great barrel, but since I can only shoot to 650yds I'm thinking a 6" bob is in the cards...
 
#33
Re: Custom 6.5 CM built off Savage Model 12 action?

Southwest's 260 loads in Win 7-08 brass are the same price as Hornady factory Creedmoor ammo; SWA 260 142gr ammo also has a higher listed velocity (2770) than the Hornady factory 140gr (2710) loads.

But yeah, it'll be easier to find Creedmoor ammo in a local store than it would 260.
 
#34
Re: Custom 6.5 CM built off Savage Model 12 action?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dmpowder</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: CrawDad338</div><div class="ubbcode-body"> <span style="font-weight: bold"><span style="text-decoration: underline">I've heard from folks</span></span> that own both calibers a .260 can be run about 60fps hotter, that could make up for a couple inches of barrel length. </div></div>

Key words!

And I love when the brass issue comes up!! Did you hear that also?

</div></div>

LOL...1st hand experience with Hornady brass, maybe not 6.5mm Creed but I do reload for 338 Lapua and 308, in both calibers I have to trim a lot more off Hornady cases because the brass is softer and it grows more after being fired. It's also thicker which diminishes powder capacity and more likely to need neck turning. I'll still mess with Hornady cases but not unless I have to. Not sure what you are talking about with price, Hornady 6.5mm Creed brass is around 35 bucks for 50. Winchester brass is superior and 25 bucks for 50.

I plan on a 6.5mm Creed upper for my AR10 ; ) so I'am far away from hate, just trying to show the pros and cons.

Federal Gold Medal match is going to have 260 ammo pretty soon but until then I agree it'll be way easier to find 6.5mm Creedmoor "match type" ammo in a local store than it would 260. You should be able to find .260 hunting rounds though.
 
#35
Re: Custom 6.5 CM built off Savage Model 12 action?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BoilerUP</div><div class="ubbcode-body">Southwest's 260 loads in Win 7-08 brass are the same price as Hornady factory Creedmoor ammo; SWA 260 142gr ammo also has a higher listed velocity (2770) than the Hornady factory 140gr (2710) loads.

</div></div>

Yup, not to mention the G7 BC on the SMK 142s are also a pinch higher than the 140 Amax.
 
#36
Re: Custom 6.5 CM built off Savage Model 12 action?

I'm not sure what they chronoed that creed ammo out of but it seems like most of us are getting over 2800 with either 24" or 26" barrels. My 26" has been 2830 lot to lot with the factory stuff. And crawdad, it does seem that hornady has been giving their creed brass some extra attention because it is noticeable nicer than the hornady 308 brass I have.
 
#37
Re: Custom 6.5 CM built off Savage Model 12 action?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Captramrod01</div><div class="ubbcode-body">crawdad, it does seem that hornady has been giving their creed brass some extra attention because it is noticeable nicer than the hornady 308 brass I have.</div></div>

Good to hear, hopefully Hornady will implement similar changes to all calibers.
 
#38
Re: Custom 6.5 CM built off Savage Model 12 action?

Not sure if Hornady will change the other brass?? They kinda had to for the Creedmoor as it is "Their baby".

It's funny because the Winn brass I use in my .223 I would loose the primer pockets after only 5 loads! I don't use Hornady brass in my .223 only because sometimes it gives me fits going in my shell holder. I also have .243 Hornady brass that has at least 20 loads on them and still going while FC brass only gives me about 10-15 loads. I will say I have never tried Winn brass in the .243 but I won't either as soon as Hornady brass gives in I will just order some Lapua for it.


I was going to mention the SW ammo but again it's all mail order. So unless you live close enough to drive and if they sell out of the front door it defeats the purpose of getting a .260 due to ammo being most readily available.



Ford VS Chevy..... wait more like Chevy VS GMC!! Heads or tails it's your call. Both will due just about anything you can ask of them and are very fun to shoot.
 
#39
Re: Custom 6.5 CM built off Savage Model 12 action?

Welp Ive decided to go 6.5.

Now the other quick questions. I called Jim to order the action and barrel but I cant decide which barrel contour to get and which stock to go with it. Either bell and carson medalist 2 or HS precision M24.

I hadnt to this point considered HS but CDI threw them out there stating that I could drop their bottom metal right into the HS precision chassis and that it was lighter than Bell. That would save me a bit of money on shipping and the price for in-letting by CDI but I read on stockys stocks website that the barrel channel in the HS is quite large.

I was planning on going with the Criterion varmit barrel but dont want a huge gap around the barrel and the barrel channel.

Anyone seen this combo in person or know how the fitment looks?
 
#40
Re: Custom 6.5 CM built off Savage Model 12 action?

I don't believe that that the standard civilian "M24" style HS stock is actually inletted for the heavier M24 profile barrel. I believe that they are actually inletted for the varmint contour.

It is definitely lighter than the B&C.
I am not certain about the CDI being a drop in fit, you may want to touch base again to be certain.

You could also talk to Kevin at stockade stocks, he will inlet it for you and he has several different stock types to choose from.
 
#41
Re: Custom 6.5 CM built off Savage Model 12 action?

Yeah CDI said that with the HS it was basically drop in. Said it may take a minute with the file or a bit of sand paper but that it would fit in the same inlet as the factory bottom metal that came cut into the HS stock.

From the description of the stock on Stockys they make it sound like the stock has a very wide barrel channel and I dont want a huge gap around the barrel with a varmit contour barrel.

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: fdkay</div><div class="ubbcode-body">I don't believe that that the standard civilian "M24" style HS stock is actually inletted for the heavier M24 profile barrel. I believe that they are actually inletted for the varmint contour.

It is definitely lighter than the B&C.
I am not certain about the CDI being a drop in fit, you may want to touch base again to be certain.

You could also talk to Kevin at stockade stocks, he will inlet it for you and he has several different stock types to choose from.</div></div>
 
#42
Re: Custom 6.5 CM built off Savage Model 12 action?

NVM just got off the phone with stockys stocks and they had a manners t5a backordered from April so I went ahead and put that on backorder so I should have to wait nearly as long as the special order stocks.
 
#43
Re: Custom 6.5 CM built off Savage Model 12 action?

Just ordered the 26" varmit contour Criterion Barrel in 6.5, Precision ground recoil lug, varmit action, wrenches, and manners t5a stock....now to wait a few weeks for the goods to arrive! Oh yeah and let the pocket book cool down.
 
You must log in or register to reply here.

Similar threads

nightvisiondude721
Savage Model 12 223Rem modernization
Replies
6
Views
724
D̷e̷v̷i̷l̷D̷o̷c̷A̷Z̷
D
usmc3439
Savage Model 10
Replies
0
Views
186
usmc3439
usmc3439
AZIROC
Savage 7mm rem mag to 7mm prc, what's needed?
Replies
2
Views
409
AZIROC
AZIROC
R
Rimfire Rhineland Arms Scorpion Stock for Savage rimfire rifle
Replies
10
Views
512
rust4brains
R
1
SOLD Model 7 action and Bottom Metal
Replies
7
Views
659
19K20CircleX
1
Top Bottom
Back
Home
Forums
Merch
Alerts