Does anyone have any info on a one piece base for a cz 527? I know I've seen them on here before. But I'm not coming up with anything.
Re: CZ 527 Base
I thought that the CZ527 already had an integral base and all you needed was rings?
I thought that the CZ527 already had an integral base and all you needed was rings?
Re: CZ 527 Base
Yes this is an old post, but has anyone started making a Picatinny rail for the CZ527 yet?
Yes this is an old post, but has anyone started making a Picatinny rail for the CZ527 yet?
Re: CZ 527 Base
My 527 came with a rail installed by the original owner. I believe he said Rimfire Technologies. I just checked their site and it indicates offerings for the 527 but I could not open the page. Good luck.
My 527 came with a rail installed by the original owner. I believe he said Rimfire Technologies. I just checked their site and it indicates offerings for the 527 but I could not open the page. Good luck.
Re: CZ 527 Base
When I couldn't get on to the page at Rimfire Tech I went on Google Shop to verify the source as RT. The site that first came up was, I believe, Big John's. Just go to Google Shop and enter "Rimfire Technology CZ 527 base."
When I couldn't get on to the page at Rimfire Tech I went on Google Shop to verify the source as RT. The site that first came up was, I believe, Big John's. Just go to Google Shop and enter "Rimfire Technology CZ 527 base."
Re: CZ 527 Base
Thanks Guys! I found them (in stock even!).
DIP CZ 527/BRNO 1 Piece 16mm to Picatinny Base-19007
http://www.joeboboutfitters.com/DIP_CZ_527_BRNO_1_Piece_16mm_to_Picatinny_Base_p/dip19007.htm
DIP CZ 527 20MOA Scope Base-19022
http://www.joeboboutfitters.com/CZ_527_20MOA_Scope_Base_19006_p/dip19022.htm
Thanks Guys! I found them (in stock even!).
DIP CZ 527/BRNO 1 Piece 16mm to Picatinny Base-19007
http://www.joeboboutfitters.com/DIP_CZ_527_BRNO_1_Piece_16mm_to_Picatinny_Base_p/dip19007.htm
DIP CZ 527 20MOA Scope Base-19022
http://www.joeboboutfitters.com/CZ_527_20MOA_Scope_Base_19006_p/dip19022.htm
Re: CZ 527 Base
I got the DIP 20MOA one-piece one. Note that Nightforce rings will not fit on them (crossbolt rail does not open wide enough). They are not exactly to picatinny spec (as Jason @ EuroOptic and I found out recently), but it is the only one with 20MOA. Badger rings fit over top, but do not sit flush (sits on the crossbolt, but does look sturdy enough to have no problems, especially with the 527 calibers). They make just work fine with cheaper weaver rings though (I didn't try yet).
I eventually got the CZ-USA one off their website, even though it does not have 20MOA cant. With 100MOA in my scope, I should probably be ok with 223 to 600 yards.
I got the DIP 20MOA one-piece one. Note that Nightforce rings will not fit on them (crossbolt rail does not open wide enough). They are not exactly to picatinny spec (as Jason @ EuroOptic and I found out recently), but it is the only one with 20MOA. Badger rings fit over top, but do not sit flush (sits on the crossbolt, but does look sturdy enough to have no problems, especially with the 527 calibers). They make just work fine with cheaper weaver rings though (I didn't try yet).
I eventually got the CZ-USA one off their website, even though it does not have 20MOA cant. With 100MOA in my scope, I should probably be ok with 223 to 600 yards.
