Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I’ve got a 7 SAUM under construction right now using an anTi XM action. Will post pics and thoughts when it gets here
I have two at the smith right now. Fondling before shipping made me happy. Both will be BDL with 2B barrels and should finish about 6.2-6.5 lbs.
24" Sendero. 30 Sherman Mag.6lbs 6oz?! That’s a nice looking rig. What’s your barrel length and caliber?
Did you ever find out if they are based on the same footprint? Looking at building the same anTi action in a Gunwerks Clymr.... I saw somewhere it maybe based on the Tenacity but not sure.Sounds like a sweet build. I’m working on something similar too. Want to use the anTi action in a Gunwerks Clymr stock. Does anyone know if the Defiance actions utilize the same foot print across their line? On the Gunwerks site the Clymr stock lists available inlets for the Defiance Rebel, Deviant, and Tenacity actions but the anTi is not mentioned. Are their actions similar enough that an anTi action would drop into a stock inlet for one of those other models in their line? I can’t find any info on the Defiance site about his either.
Not exactly what you asked but I had the components out so I took some pics.Did you ever find out if they are based on the same footprint? Looking at building the same anTi action in a Gunwerks Clymr.... I saw somewhere it maybe based on the Tenacity but not sure.
What's the ejection port measurement on the stock? I'm hoping my Remington SA inlet doesn't fit like that with my Anti-X.Not exactly what you asked but I had the components out so I took some pics.
This ClymR is inletted for a short remington. It doesn't match either defiance, but using the stock lines for reference you can see similarities between the tenacity and Anti. The bolt handles are the main differences.
View attachment 7597983View attachment 7597984
View attachment 7597987View attachment 7597988
That is a remington inlet, so your anti will fit exactly like that.What's the ejection port measurement on the stock? I'm hoping my Remington SA inlet doesn't fit like that with my Anti-X.
Your ejection port looks a lot shorter than my stock's ejection port that's why I am curious.That is a remington inlet, so your anti will fit exactly like that.
Oh, I see what you’re saying. I don’t have the stuff here to measure at the moment, but here’s a picture of the same stock with a Remington in it.Your ejection port looks a lot shorter than my stock's ejection port that's why I am curious.
Depends on how close of a clone. As you can see demonstrated above there certainly can be.Is there a difference between a Remington SA inlet and a Remington SA Clone inlet?
I think most clones that natively take Wyatt's or other extended mags have the rear of the port flared or moved back.Is there a difference between a Remington SA inlet and a Remington SA Clone inlet?
8-40 and they have holes for the pinsBit of a thread necro, but what base/ring mount screws does the anTi use? I have one one the way, but don’t see that data point anywhere on Defiance’s web site.
Pretty sure a stock Rem 700 action uses #6-48 screws, but think I read somewhere the Defiance actions use #8-40
I’m brain dead from work right now, so may be thinking of something else.
You can buy pinned Talleys direct from Defiance.Bit of a thread necro, but what base/ring mount screws does the anTi use? I have one one the way, but don’t see that data point anywhere on Defiance’s web site.
Pretty sure a stock Rem 700 action uses #6-48 screws, but think I read somewhere the Defiance actions use #8-40
I’m brain dead from work right now, so may be thinking of something else.