Re: Engagement Ring
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lima Bravo</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Wes_Mantooth</div><div class="ubbcode-body">I've been a jeweler, professionally, since 1998 and I'll offer the same advice I offer all of my customers.
Don't buy online. Find a local jeweler you can trust. Your local guy's prices on diamonds should be within 10-15% of what you see on the big online sites.
A certified diamond isn't a bad idea. A "cert." is just a second opinion from an independant lab. <span style="font-weight: bold"> Whatever you do don't believe anything printed on an EGL cert.</span> These certificates are so consistantly high graded that if I sell a stone with an EGL cert the cert goes in the trash and it is sold as uncertified. GIA is a trustworthy organization.
Buy a stone that is "eye clean" with no visible inclusions to the naked eye. This means SI1 and better, sometimes SI2 stones qualifiy. Also get a stone that is near colorless or better. This means I or better in color.
If you are going to spend a little extra on something, get a well cut stone. Don't rule out a Lazar ideal cut or a hearts and arrows. Cut is the most important characteristic of a diamond once you get into the eye clean/near colorless range of stones.
<span style="font-weight: bold">NEVER, NEVER, NEVER buy a treated diamond. </span> If someone is pushing a "clarity enhanced" or "Yahuda" stone run away screaming. These stones start as heavily included crap that no one will buy. The shit in the stone is burned out with a laser, then the cavities are filled with glue or glass. You will have nothing but grief with these stones.
Metals are expensive right now, consequently, many mass produced pieces are light and thin, avoid these, they will cost you money in repairs down the road. Buy heavier rings and stay away from micro-pave. Micro-pave is in style now, this is the stuff with a bunch of tiny diamonds set all over it. The stones are easily lost. If you are having the ring made and want that look, a good jeweler can set a slightly larger stone in the pave style and they will probably hold up better.
You can save money by buying a diamond that isn't a round brilliant cut. Ovals, Marquise, Pears, Emerald cuts and to a lesser extent princess cut stones are cheaper than rounds. There is no cut grade for fancy shaped stones.
If you have any questions feel free to e-mail me
[email protected] </div></div>
I have been in/around the jewelry business all of my life, as a GIA certified gemoligist I agree with most of the above espically about staying away from online sellers. No two diamonds are alike therefore it is impossible to buy one based on a grade, you need to see it. It is a natural gem not a man made cookie cutter product. Use the online sellers as a place to do some research but I stongly suggest you buy from someone local that you trust, if you don't trust them, go somewhere else! Plus you need a local place for sizing, general repiars, future purchases, wedding bands etc. I am a fan of GIA certs for sure, EGL sometimes are in line but more often than not, they are more laxed on their grading...GIA is best.
I would also say that I'd start with a minimum of SI1 and buy at least H color and go as colorless as you can afford, I like G-SI1 stones for a good value/quality medium. My wife wears a D-SI1 stone which I looked at over 10 different D-F color VS1-SI1 stones and picked out the best one not based entirely on grade but beauty and brilliance.
Bottom line is that these are not like buying say a certain model Nightforce scope which you know exactly what you are getting no matter where you go as long as its not a knock off, diamonds need to be bought looking at them in person side by side comparisions. </div></div>
What they said. I have been a jeweler my whole life and thats all spot on. No treated stones for sure fracture filled is junk. PG