Who has a good bit of experience with this bullet? Is it sensitive to jump? How much does it like? Curious how often I'll have to tune it over the life of a barrel. Does the RBT feature really help with barrel life?
Experience with the 115 DTAC RBT?
- Thread starter Notdylan
- Start date
i shot them for 2 years(4.5 barrels)in a 6CM....its a SMK basically so not real jump sensitive...id start at .020 off and always had a load with in 24 rounds....i just added .2 grains of powder as velocity started to drop off never adjusted seating except in one barrel...not sure about the RBT and barrel life...i had one last just under 1700 rounds and another go south at 6-700 but average was 1450 to 1550.
Since they are often out of stock, I should say they suck. The truth is they are pretty jump insensitive and accurate. I started them at about .040" off 1000 rounds ago. I'm not sure where they are now, but they still shoot around .5 to .6 moa. They were well under .5 at the start. The only other bullet I've shot long range with is the 105 amax. The 115 DTAC shoots significantly better.
I always say i am going to try them but every time i try to order some they are out of stock. Maybe i will have to try to look harder... is there a noticeable difference is "splash" spotting misses or sound when shooting steel vs a 105?
That's nice to hear. One thing I was worried about is that perhaps the 115s might begin to approach 6.5 123 recoil. Which isn't bad! I'm just wanting a soft shooting 6.
then you better stick to the 105s...115s in a 6cm at 3050 are about the same as a 123 in a 6.5cm at 2850ish...im kinda guessing here...im not recoil sensitive...i just switched to a 6.5x47 and the recoil with a 140 at 2750 actually feels less or about the same.
the thing with a 6mm is the recoil is different...snappy(for sake of a better word)
the thing with a 6mm is the recoil is different...snappy(for sake of a better word)
Similar threads
Rifle Scopes
Tikka T3 Tac A1 - scope mount recommendations
