Would like to get your input on the best filler material to use in loading subsonic 308 loads. I have tried c.o.w. and polyester filling. The wheat left the barrel visibly dirty and I am afraid what the polyester residue will be. Any suggestions are greatly appreciated.
-
Having trouble using the site?
Contact support
Filler material for subsonic loads
- Thread starter Shakeber
- Start date
Re: Filler material for subsonic loads
i use titegroup with no filler, havent had any issues with it. there is load data on the hodgdon website.
i use titegroup with no filler, havent had any issues with it. there is load data on the hodgdon website.
Re: Filler material for subsonic loads
If you absolutely have to use filler instead of Trailboss, try www.pufflon.com.
If you absolutely have to use filler instead of Trailboss, try www.pufflon.com.
Re: Filler material for subsonic loads
Filler is 12L14 steel held in place with Loctite 601.
145 gr bullet at 440 fps, sounds like a pellet gun, no suppressor required.
All the expansion required for sub sonic gas escapement is bore volume.
Filler is 12L14 steel held in place with Loctite 601.
145 gr bullet at 440 fps, sounds like a pellet gun, no suppressor required.
All the expansion required for sub sonic gas escapement is bore volume.
Re: Filler material for subsonic loads
This is my favorite post from all of snipershide:
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Clark</div><div class="ubbcode-body">
Filler is 12L14 steel held in place with Loctite 601.
145 gr bullet at 440 fps, sounds like a pellet gun, no suppressor required.
All the expansion required for sub sonic gas escapement is bore volume. </div></div>
This is my favorite post from all of snipershide:
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Clark</div><div class="ubbcode-body">
Filler is 12L14 steel held in place with Loctite 601.
145 gr bullet at 440 fps, sounds like a pellet gun, no suppressor required.
All the expansion required for sub sonic gas escapement is bore volume. </div></div>
Re: Filler material for subsonic loads
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 500grains</div><div class="ubbcode-body">This is my favorite post from all of snipershide:
</div></div>
My best wishes to you, too.
And may you have regular bowel movements.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 500grains</div><div class="ubbcode-body">This is my favorite post from all of snipershide:
</div></div>
My best wishes to you, too.
And may you have regular bowel movements.
Re: Filler material for subsonic loads
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Clark</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 500grains</div><div class="ubbcode-body">This is my favorite post from all of snipershide:
</div></div>
My best wishes to you, too.
And may you have regular bowel movements. </div></div>LOL
I use Titegroup as well. No issues.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Clark</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 500grains</div><div class="ubbcode-body">This is my favorite post from all of snipershide:
</div></div>
My best wishes to you, too.
And may you have regular bowel movements. </div></div>LOL
I use Titegroup as well. No issues.
Re: Filler material for subsonic loads
I have used SR4759 without fillers with excellent results in 308, 30/06,and 6.5 X 55.
I have used SR4759 without fillers with excellent results in 308, 30/06,and 6.5 X 55.
