Finally, everything I ordered on deployment got put together.

Scotts556

Scotts556

Sergeant
Full Member
Minuteman
Oct 23, 2009
570
113
31
Texas
#1
Well I got all the stuff I ordered on deployment put together.

18 inch .223 Ar
Upper
MI keymod free float fore end.
No name upper from BCM
Wilson combat 18 5.56 1x8 barrel.
Spikes tactical dynacomp.
ADM 30 mm mount (not to happy with it)
BCM Gun fighter charging handle Mod 3
Wilson combat NP3 BCG
Wilson combat straight tube adjustable gas block
SWFA SS 3-15X42 FFP MIL/MIL

Lower
DPMS lower
PSA lower build kit.
Gesielle SSA
Sierra precision grip (was BCM gunfighter but to small)
MAgpul UBR


24 Inch 6.5 Grendel.
Upper
Dpms slick slide
Wilson Combat Bolt carrier.
Black hole weaponry 24 inch 1x8 barrel Standard profile (I think)
BCM gunfighter Charging handle mod 3
Wilson combat muzzle break.
ADM mount
SWFA SS 10X MIL/MIL

Lower
DPMS Lower
Magpul rifle stock.
PSA lower build kit
CMC Flat sigle stage trigger (2 pounds)



<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Shooting/Leave6-13thru7-52014465_zps64d13f05.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Shooting/Leave6-13thru7-52014465_zps64d13f05.jpg" border="0" alt=" photo Leave6-13thru7-52014465_zps64d13f05.jpg"/></a>

<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Shooting/Leave6-13thru7-52014462_zps9059fb13.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Shooting/Leave6-13thru7-52014462_zps9059fb13.jpg" border="0" alt=" photo Leave6-13thru7-52014462_zps9059fb13.jpg"/></a>

<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Shooting/Leave6-13thru7-52014452_zps1fc23f63.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Shooting/Leave6-13thru7-52014452_zps1fc23f63.jpg" border="0" alt=" photo Leave6-13thru7-52014452_zps1fc23f63.jpg"/></a>
The .223 Likes 60 grain NBT. Im real rusting on my shooting but I Can usually do about a 1 inch, BEst group was a little over a half inch but I forget to take a picture of it.

<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Shooting/Leave6-13thru7-52014444_zps75dad83d.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Shooting/Leave6-13thru7-52014444_zps75dad83d.jpg" border="0" alt=" photo Leave6-13thru7-52014444_zps75dad83d.jpg"/></a>

<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Shooting/Leave6-13thru7-52014441_zpscc63fb7b.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Shooting/Leave6-13thru7-52014441_zpscc63fb7b.jpg" border="0" alt=" photo Leave6-13thru7-52014441_zpscc63fb7b.jpg"/></a>

<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Leave6-13thru7-52014440_zps1e3e58f4.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Leave6-13thru7-52014440_zps1e3e58f4.jpg" border="0" alt=" photo Leave6-13thru7-52014440_zps1e3e58f4.jpg"/></a>

<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Leave6-13thru7-52014439_zpsbebacf56.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Leave6-13thru7-52014439_zpsbebacf56.jpg" border="0" alt=" photo Leave6-13thru7-52014439_zpsbebacf56.jpg"/></a>

<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Leave6-13thru7-52014430_zps15a547ac.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Leave6-13thru7-52014430_zps15a547ac.jpg" border="0" alt=" photo Leave6-13thru7-52014430_zps15a547ac.jpg"/></a>

<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Leave6-13thru7-52014432_zps56771586.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Leave6-13thru7-52014432_zps56771586.jpg" border="0" alt=" photo Leave6-13thru7-52014432_zps56771586.jpg"/></a>

<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Leave6-13thru7-52014433_zps8c0bb100.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Leave6-13thru7-52014433_zps8c0bb100.jpg" border="0" alt=" photo Leave6-13thru7-52014433_zps8c0bb100.jpg"/></a>
The range I Was at. Out to 500 yards. The 500 yard targes are about half way up the back stop hill.

Scott
 
#3
Can't see the pics on my internet (fuck you IT), but I know well what it's like collecting parts from a shit hole only to see them months down the road. Enjoy your rifles, you've sure as hell earned them!
 
#5
Also interested to hear what you don't like about the ADM. Like [MENTION=41860]Redmanss[/MENTION] said, we can understand buying cool shit and waiting months to a year to finally get to mess with it. Welcome home and enjoy the toys.
 
#6
Correct me if im wrong but i dont think you have a true monolithic upper with a free float handguard,,,,, and your scope mount is spanning the upper / handguard which i wouldnt do..... Hard to say with the pictures supplied



Scotts556 said:
Well I got all the stuff I ordered on deployment put together.

18 inch .223 Ar
Upper
MI keymod free float fore end.
No name upper from BCM
Wilson combat 18 5.56 1x8 barrel.
Spikes tactical dynacomp.
ADM 30 mm mount (not to happy with it)
BCM Gun fighter charging handle Mod 3
Wilson combat NP3 BCG
Wilson combat straight tube adjustable gas block
SWFA SS 3-15X42 FFP MIL/MIL

Lower
DPMS lower
PSA lower build kit.
Gesielle SSA
Sierra precision grip (was BCM gunfighter but to small)
MAgpul UBR


24 Inch 6.5 Grendel.
Upper
Dpms slick slide
Wilson Combat Bolt carrier.
Black hole weaponry 24 inch 1x8 barrel Standard profile (I think)
BCM gunfighter Charging handle mod 3
Wilson combat muzzle break.
ADM mount
SWFA SS 10X MIL/MIL

Lower
DPMS Lower
Magpul rifle stock.
PSA lower build kit
CMC Flat sigle stage trigger (2 pounds)



<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Shooting/Leave6-13thru7-52014465_zps64d13f05.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Shooting/Leave6-13thru7-52014465_zps64d13f05.jpg" border="0" alt=" photo Leave6-13thru7-52014465_zps64d13f05.jpg"/></a>

<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Shooting/Leave6-13thru7-52014462_zps9059fb13.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Shooting/Leave6-13thru7-52014462_zps9059fb13.jpg" border="0" alt=" photo Leave6-13thru7-52014462_zps9059fb13.jpg"/></a>

<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Shooting/Leave6-13thru7-52014452_zps1fc23f63.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Shooting/Leave6-13thru7-52014452_zps1fc23f63.jpg" border="0" alt=" photo Leave6-13thru7-52014452_zps1fc23f63.jpg"/></a>
The .223 Likes 60 grain NBT. Im real rusting on my shooting but I Can usually do about a 1 inch, BEst group was a little over a half inch but I forget to take a picture of it.

<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Shooting/Leave6-13thru7-52014444_zps75dad83d.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Shooting/Leave6-13thru7-52014444_zps75dad83d.jpg" border="0" alt=" photo Leave6-13thru7-52014444_zps75dad83d.jpg"/></a>

<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Shooting/Leave6-13thru7-52014441_zpscc63fb7b.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Shooting/Leave6-13thru7-52014441_zpscc63fb7b.jpg" border="0" alt=" photo Leave6-13thru7-52014441_zpscc63fb7b.jpg"/></a>

<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Leave6-13thru7-52014440_zps1e3e58f4.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Leave6-13thru7-52014440_zps1e3e58f4.jpg" border="0" alt=" photo Leave6-13thru7-52014440_zps1e3e58f4.jpg"/></a>

<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Leave6-13thru7-52014439_zpsbebacf56.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Leave6-13thru7-52014439_zpsbebacf56.jpg" border="0" alt=" photo Leave6-13thru7-52014439_zpsbebacf56.jpg"/></a>

<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Leave6-13thru7-52014430_zps15a547ac.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Leave6-13thru7-52014430_zps15a547ac.jpg" border="0" alt=" photo Leave6-13thru7-52014430_zps15a547ac.jpg"/></a>

<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Leave6-13thru7-52014432_zps56771586.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Leave6-13thru7-52014432_zps56771586.jpg" border="0" alt=" photo Leave6-13thru7-52014432_zps56771586.jpg"/></a>

<a href="http://s1311.photobucket.com/user/PfcBrooner/media/Leave6-13thru7-52014433_zps8c0bb100.jpg.html" target="_blank"><img src="http://i1311.photobucket.com/albums/s664/PfcBrooner/Leave6-13thru7-52014433_zps8c0bb100.jpg" border="0" alt=" photo Leave6-13thru7-52014433_zps8c0bb100.jpg"/></a>
The range I Was at. Out to 500 yards. The 500 yard targes are about half way up the back stop hill.

Scott
Click to expand...
 
#7
elfster1234 said:
Correct me if im wrong but i dont think you have a true monolithic upper with a free float handguard,,,,, and your scope mount is spanning the upper / handguard which i wouldnt do..... Hard to say with the pictures supplied
Click to expand...

Good catch Buddy. I agree it's hard to tell from the photos, but that huge gap at the barrel nut is "suspicious". OP, would it be possible to see a picture of your top rail with the scope removed?
 
#8
bogeybrown said:
Good catch Buddy. I agree it's hard to tell from the photos, but that huge gap at the barrel nut is "suspicious". OP, would it be possible to see a picture of your top rail with the scope removed?
Click to expand...

ITs not a true mono. But its the only way I could get a semi okay eye releif. No POI issues at all. And yes spanning the gap is a bad thing. But I waited months to get at this stuff and at that point I just wanted to shoot them.

As the why I dont like ADM.

A: they feel cheep.
B: Getting the latch adjusted is a pain in the ass.
C: After taking a minor fall in the back seat of the truck the scope slipped in the rings. and they where properly tightened.
D: I cannot for the life of me work the latch without a flat tipped screw driver. Big fingers suck fat ones.

So most likely it will be night force unimounts from here on out.

Scott
 
#10
You just need a cantilever mount that will give you a forward offset. If you're set on QD Bobro makes a nice dual lever, Larue makes a few, and ADM makes a few (although I can't stand their levers either). If QD isn't a req Aero Precision makes one that weighs in at 3 or 4 ounces and is only about $100. I need mounts that give me a forward offset as well on all my AR platform rigs so I can run them nice and tight and still have enough room for the 3-4" of eye relief.
 
#11
I might look at a mount with a lower centerline as well. Like in the 1.2-1.3" range. That mount looks like it pushes the optic incredibly high. Did you have any issues getting a solid cheekweld with the optic that high?
 
#13
I will most likely go with the nightforce uni-mount. The Aero mount looks airsoftish to me, The bobro mounts are Killer expensive. Fall back would be LaRue. Thanks for the the complements guys!

997, Its a spikes tactical dynacomp. So it is a comp. Works really good at hiding the flash and not so good at recoil impulse. Probly Will go to a BCM Gunfighter Comp. Witch I have a 16 inch upper and works great.

Scott
 
You must log in or register to reply here.

Similar threads

J
PGW Timberwolf.338LM
Replies
4
Views
835
Canuck1977
Canuck1977
S
Gunsmithing My Tempest Build
Replies
5
Views
623
Supersubes
Supersubes
D46Infinity
Update- Making A Cover for the Leupold Mk4 Spotter
Replies
13
Views
1K
UK Basketball
UK Basketball
Terry Cross
Mk-1 DBM bottom metal hardware from KMW
Replies
20
Views
3K
Wormydog1724
Wormydog1724
devldogs55
Do different atmospherics matter when truing DSF on 5700 Elite?
Replies
3
Views
752
_Windrider_
_Windrider_
Top Bottom
Back
Home
Forums
Merch
Alerts