Suppressors Firing 6.5CM from a .338 suppressor.

[AEROMechanic]

I did a search but came up empty.

I want a can that I can move between my .338 Norma and 6.5CM, Basically, is this safe to do? (I will only be firing supers in either caliber if that plays into it at all)

Thanks

 

[jasonfaz]

What is your barrel length on the .338 Norma?

 

[AEROMechanic]

What is your barrel length on the .338 Norma?

23"

 

[Abq-Defense]

Sure, this is no problem. I have done it, and Psyops runs a 338 can on his 6.5CM.

The Thunderbeast Arms 338-BA works by having a muzzle break on each rifle, then you can move the can between rifles, even if the barrels are different widths and/or threading. It works on 338 barrels 20 inches and longer.

https://thunderbeastarms.com/products/338ba

They are running a Group Buy starting Monday.

 

[jasonfaz]

Yep, you're good with the TBAC BA version or an AAC Titan. I've used both on .338 LM down to 20" and both have been fantastic additions.

 

[AEROMechanic]

Yeah I was planing on getting a SAS Arbiter myself, but Ill keep that in mind fellas

 

[orkan]

I use a DTSS 338 on tons of different calibers including 6.5CM. It's good down to 18" on a 338LM full house load. Consequently it's also the lightest, and shortest of the 338 cans. Give a call any time if you'd like to discuss getting one.

 

[jasonfaz]

Yeah I was planing on getting a SAS Arbiter myself, but Ill keep that in mind fellas

Hmmmm, I'm not sure if I'd try to squeeze a .338 Norma through a 30 cal Arbiter. That's going to be very NOT fun. Might you be confusing that can with the SAS Vengeance or the Phoenix? The Vengeance looks promising, but don't have any time behind one.

 

[jasonfaz]

6.5 Creed is way quieter in a .338 can opposed to a .30 cal suppressor anyway...

 

[AEROMechanic]

Hmmmm, I'm not sure if I'd try to squeeze a .338 Norma through a 30 cal Arbiter. That's going to be very NOT fun. Might you be confusing that can with the SAS Vengeance or the Phoenix? The Vengeance looks promising, but don't have any time behind one.

HaHa, yes, the Vengeance is what I meant. ;-) These things happen when your scoping out every model of suppressor from every manufacturer under the sun

Orkan I will look into the Desert Tech suppressors and if I decide to go that route, rest assured, you'll get my business.

 

[jasonfaz]

I figured (or hoped) that's what you meant.

Mike High had a Vengeance last time I was in. That bad boy looks promising man. If 37.5 DB reduction in a 20 oz can is legit, it'll definitely be adding a tomb mounted Vengeance to the collection!

 

[Colohunter]

They are running a Group Buy starting Monday.

Where will the info on the group buy be?

 

[HansohnBrothers]

Where will the info on the group buy be?

https://thunderbeastarms.com/news/2014-thunder-beast-arms-group-buy/

 

[Colohunter]

Thank you!

 

[Pinecone]

Crap, I did NOT need to see this.