-
Having trouble using the site?
Contact support
Re: fn spr action
lots of people are doing the M700 style action build when CDNN blew out all those PBR actions
they make a very sturdy action with many stocks for as well as barrels and gun smiths.
not as many modifications like a remmy but the control feel is nice
CDI also makes a bottom metal to use AICS mags
my only issue with the SPR build is i cannot get an AICS chasis and thats the reason im going to sell my SPR shortly
lots of people are doing the M700 style action build when CDNN blew out all those PBR actions
they make a very sturdy action with many stocks for as well as barrels and gun smiths.
not as many modifications like a remmy but the control feel is nice
CDI also makes a bottom metal to use AICS mags
my only issue with the SPR build is i cannot get an AICS chasis and thats the reason im going to sell my SPR shortly
Re: fn spr action
I'm doing a build for a customer, using one of these, and I have to say that I'm impressed. This action was very square and had almost 100% lug contact when I pulled it down. The CDI bottom metal and DBM requires some maching but otherwise looks to be a great aftermarket accessory.
I'm doing a build for a customer, using one of these, and I have to say that I'm impressed. This action was very square and had almost 100% lug contact when I pulled it down. The CDI bottom metal and DBM requires some maching but otherwise looks to be a great aftermarket accessory.
Re: fn spr action
i got an action from 19scout77 & having a truck axle being screwed on at the moment...
i got an action from 19scout77 & having a truck axle being screwed on at the moment...
Re: fn spr action
Love my FN. Mine is factory but I am sure it would be great to build custom off of.
I'm with mtm about an AICS setup. It would be a nice option to have (not that my A5 isn't great). My question is can it dimensionally be done? That is can a chassis be machined and the skins be put on like Roedale has done for the Tikka and Howa. I even seem to remember him pondering the idea.
I would think it could be done. I would think if FN owners got a little vocal and showed there was a market, someone would make us one.
How bout it CDI, Seekins, Roedale... We'll buy it if you make it.
Love my FN. Mine is factory but I am sure it would be great to build custom off of.
I'm with mtm about an AICS setup. It would be a nice option to have (not that my A5 isn't great). My question is can it dimensionally be done? That is can a chassis be machined and the skins be put on like Roedale has done for the Tikka and Howa. I even seem to remember him pondering the idea.
I would think it could be done. I would think if FN owners got a little vocal and showed there was a market, someone would make us one.
How bout it CDI, Seekins, Roedale... We'll buy it if you make it.
Re: fn spr action
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: S2CPitts</div><div class="ubbcode-body">19Scout,
Who made that barrel? Looks real nice...
Chris </div></div>
Its a Border Barrel, spiral fluted by Karl Kampfeld.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: S2CPitts</div><div class="ubbcode-body">19Scout,
Who made that barrel? Looks real nice...
Chris </div></div>
Its a Border Barrel, spiral fluted by Karl Kampfeld.
Re: fn spr action
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: swede69</div><div class="ubbcode-body">any thoughts on this receiver for a build?</div></div>Here's a thought:
Barreled action from Ken at CDNN: $499
Sell the DBM or bottom metal: -$100
Get CDI bottom metal on sale now: $205
Snag the basic McMillan A3 on the Specials Page: $525
Send it all to be pillar bedded by GAP: $265
Gets you a kick-ass rifle for under $1400.
The actions are stout and heavy, the triggers are good, and I prefer the action itself (not the bolt) for durability over Remington 700's.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: swede69</div><div class="ubbcode-body">any thoughts on this receiver for a build?</div></div>Here's a thought:
Barreled action from Ken at CDNN: $499
Sell the DBM or bottom metal: -$100
Get CDI bottom metal on sale now: $205
Snag the basic McMillan A3 on the Specials Page: $525
Send it all to be pillar bedded by GAP: $265
Gets you a kick-ass rifle for under $1400.
The actions are stout and heavy, the triggers are good, and I prefer the action itself (not the bolt) for durability over Remington 700's.
Re: fn spr action
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BOLTRIPPER</div><div class="ubbcode-body">i got an action from 19scout77 & having a truck axle being screwed on at the moment...</div></div>
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BOLTRIPPER</div><div class="ubbcode-body">i got an action from 19scout77 & having a truck axle being screwed on at the moment...</div></div>
Re: fn spr action
I know I am starting to take a liking to them more as aftermarket parts are growing
I know I am starting to take a liking to them more as aftermarket parts are growing
Re: fn spr action
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Graham</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: swede69</div><div class="ubbcode-body">any thoughts on this receiver for a build?</div></div>Here's a thought:
Barreled action from Ken at CDNN: $499
Sell the DBM or bottom metal: -$100
Get CDI bottom metal on sale now: $205
Snag the basic McMillan A3 on the Specials Page: $525
Send it all to be pillar bedded by GAP: $265
Gets you a kick-ass rifle for under $1400.
The actions are stout and heavy, the triggers are good, and I prefer the action itself (not the bolt) for durability over Remington 700's. </div></div>
With all due respect, having had a number of factory FNs as well as customs--you cannot compare a stock PBR barreled action to a a custom based on an FN action. If you have a choice, throw the factory barrel in the trash.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Graham</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: swede69</div><div class="ubbcode-body">any thoughts on this receiver for a build?</div></div>Here's a thought:
Barreled action from Ken at CDNN: $499
Sell the DBM or bottom metal: -$100
Get CDI bottom metal on sale now: $205
Snag the basic McMillan A3 on the Specials Page: $525
Send it all to be pillar bedded by GAP: $265
Gets you a kick-ass rifle for under $1400.
The actions are stout and heavy, the triggers are good, and I prefer the action itself (not the bolt) for durability over Remington 700's. </div></div>
With all due respect, having had a number of factory FNs as well as customs--you cannot compare a stock PBR barreled action to a a custom based on an FN action. If you have a choice, throw the factory barrel in the trash.
Similar threads
Accessories
WTB: McMillan A3 M70
