-
Having trouble using the site?
Contact support
Maggie’s Funny & awesome pics, vids and memes thread (work safe, no nudity)
- Thread starter Lawless
- Start date
Hey Lawless
With you being enamoured of razors and displaying so many lovely works, I thought you might be interested in my humble nod to the straight razor with this small work knife I just finished for a local whip maker.
6mm 5160 spring steel, hollow ground on the 300mm contact wheel.
After I heat treated it I boiled it in white vinegar for an hour to acid wash the steel and give it an aged look, rubbed it down with 2000 grit wet paper, then the various cloth wheels.
The handle scales are Tasmanian Blackwood, not even slightly black but hard and dense and good to work.
Because it'll be used as a work knife and not a razor I put a 20 degree edge on it rather than 15.
With you being enamoured of razors and displaying so many lovely works, I thought you might be interested in my humble nod to the straight razor with this small work knife I just finished for a local whip maker.
6mm 5160 spring steel, hollow ground on the 300mm contact wheel.
After I heat treated it I boiled it in white vinegar for an hour to acid wash the steel and give it an aged look, rubbed it down with 2000 grit wet paper, then the various cloth wheels.
The handle scales are Tasmanian Blackwood, not even slightly black but hard and dense and good to work.
Because it'll be used as a work knife and not a razor I put a 20 degree edge on it rather than 15.
Dude, that is fantastic! Beautiful work, how long have you been doing this!?
Chemo cancelled for 10 days because my white blood cell count was too low. Mixed emotions.
Not sure how to respond, still praying for ya brother!
This happens. Chemo is a balancing act.
Head up SGT!
He is the Author and Finisher of our faith and the one who hung the stars!
We serve at His pleasure and when our faces lift toward His, he becomes our prayer warrior through His Spirit with utterings we cannot comprehend!
I am literally sharing an office with a fellow sgt. today who has had leukemia for 3 years....and I just found out about it in the last 2 weeks.
He regularly does chemo, has hair, has fathered several children since he started chemo upon his diagnosis.....and NOBODY had a clue!!!
Hits everyone differently I suppose.
bench
@Lawless how many razors do you have now or on the way? Im pretty sure you have more razors than I have guns.
Then be happy you had the day off, save your energy and REST.
I did a years worth of it last year, my WBC was @ 2.5 last week,that's a lot better than 0.09 considering 5.0 is low.
My type of Chemo was rough because they couldn't use the self injectior that protected my bone marrow after each cycle as they were worried my spleen would rupture.
Trust your Doctor,coming from me that's a bold statement,I'll keep you in my thoughts
Only movie filmed in my town that I know of was Rodney Dangerfield's "Back to School." Also a classic.
Thanks mate, I've had a love of edged weapons since I was given my first knife as a kid.
For years I just played around with it, too busy working to do much hobby time.
In late '96 a semi driver who had driven over 500km without taking any of his mandated rest breaks went to sleep and crossed on to my side of the highway.
The wanker hit me so hard the seats tore out of the floor, seat belt broke and I was spat out the closed driver's window, broke my neck, back, skull, right frontal lobe and half my teeth.
So, no more mining or as it turned out any full time work again, but I'm walking and I can wipe my own bum, so I'm doing better than most of the others I met while in the brain injury unit.
I decided late last year to get serious about knife making and started to gather the required tools and knowledge, luckily got most I need before the bloody Chinese released their latest pox on the world.
That one pictured is the third I've finished, I have the inevitable "aw fuck" collection from my steep trial and error learning curve.
This is my second, it's rough around the edges but I learned a great deal making it and each new one gets a little better.
I also learned heaps just making and hardening the file guide I needed for the guthook in this little hunter.
Again, boiled in vinegar to age finish it but not rubbed back so it stays matt and not glossy.
I learned a lot more experimenting and building the electrochemical etcher for doing the little artworks and logos like the tiger on this and the stag on the work knife.
I'm currently working out how to hollow grind a double edged pig stabber, quite a lot of mad pig stabbers getting about here apparently.
If your amenable, I'll put another pic or 2 on your thread here.
Absolutely!Thanks mate, I've had a love of edged weapons since I was given my first knife as a kid.
For years I just played around with it, too busy working to do much hobby time.
In late '96 a semi driver who had driven over 500km without taking any of his mandated rest breaks went to sleep and crossed on to my side of the highway.
The wanker hit me so hard the seats tore out of the floor, seat belt broke and I was spat out the closed driver's window, broke my neck, back, skull, right frontal lobe and half my teeth.
So, no more mining or as it turned out any full time work again, but I'm walking and I can wipe my own bum, so I'm doing better than most of the others I met while in the brain injury unit.
I decided late last year to get serious about knife making and started to gather the required tools and knowledge, luckily got most I need before the bloody Chinese released their latest pox on the world.
That one pictured is the third I've finished, I have the inevitable "aw fuck" collection from my steep trial and error learning curve.
This is my second, it's rough around the edges but I learned a great deal making it and each new one gets a little better.
View attachment 7413085
I also learned heaps just making and hardening the file guide I needed for the guthook in this little hunter.
Again, boiled in vinegar to age finish it but not rubbed back so it stays matt and not glossy.
I learned a lot more experimenting and building the electrochemical etcher for doing the little artworks and logos like the tiger on this and the stag on the work knife.
I'm currently working out how to hollow grind a double edged pig stabber, quite a lot of mad pig stabbers getting about here apparently.
If your amenable, I'll put another pic or 2 on your thread here.
Thanks. I was relieved not to get it but also want to get it over. It sounds like your treatments were really tough, I hope your count comes up. I get the automatic injector for the next treatment. I'm afraid I don't make a very good patient.
I have a good doc who treated my daughter for brain cancer a few years ago and gave her an extra 3 years. I do still give credence,though, to the saying, "If your time ain't come yet, even a doctor can't kill you."
Semper-Fi
What goes on the ground .... is the mag out of the guy’s pistol. Or is it a knife that would have been in his left hand?
I cannot make it out clearly enough.
maybe a cell phone?
There is what looks like a quick flash of a reflection off a screen as it hits the ground
Guys here in my county we had 8” rain last night. A car with a mom and 2 toddlers was swept away when a road collapsed over a creek. Toddlers still not found, please pray for that family 
I have a need myself this morning. I would appreciate a word.
I have a need myself this morning. I would appreciate a word.
Prayers and good ju ju being sent your way. We’ve had thunderstorms ALL night... 6-8 in. of rain so far.Guys here in my county we had 8” rain last night. A car with a mom and 2 toddlers was swept away when a road collapsed over a creek. Toddlers still not found, please pray for that family
I have a need myself this morning. I would appreciate a word.
View attachment 7413328
Hang in there Lawless , the sun will shine again
Last edited:
Looked like his tactical iPhone. If you notice, right as it hits the ground, you can see a reflection of the screen.
