I was looking at the gladius on the GA website and was wondering if anyone has bought one, has a range report, or just any experience or thought about it?
-
Having trouble using the site?
Contact support
GAP Gladius
- Thread starter tlg308
- Start date
Re: GAP Gladius
<iframe title="YouTube video player" width="640" height="390" src="http://www.youtube.com/embed/sPwXOUxCiGE" frameborder="0" allowfullscreen></iframe>
and another Gladius
<iframe title="YouTube video player" width="640" height="510" src="http://www.youtube.com/embed/15qj032UJ1I" frameborder="0" allowfullscreen></iframe>
<iframe title="YouTube video player" width="640" height="390" src="http://www.youtube.com/embed/sPwXOUxCiGE" frameborder="0" allowfullscreen></iframe>
and another Gladius
<iframe title="YouTube video player" width="640" height="510" src="http://www.youtube.com/embed/15qj032UJ1I" frameborder="0" allowfullscreen></iframe>
Re: GAP Gladius
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lowlight</div><div class="ubbcode-body"><iframe title="YouTube video player" width="640" height="390" src="http://www.youtube.com/embed/sPwXOUxCiGE" frameborder="0" allowfullscreen></iframe>
and another Gladius
<iframe title="YouTube video player" width="640" height="510" src="http://www.youtube.com/embed/15qj032UJ1I" frameborder="0" allowfullscreen></iframe> </div></div>Thanks for the vid's Lowlight. Did you like how it preformed on paper? I'm just asking because GA said it will do 1/2 moa have you seen better?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lowlight</div><div class="ubbcode-body"><iframe title="YouTube video player" width="640" height="390" src="http://www.youtube.com/embed/sPwXOUxCiGE" frameborder="0" allowfullscreen></iframe>
and another Gladius
<iframe title="YouTube video player" width="640" height="510" src="http://www.youtube.com/embed/15qj032UJ1I" frameborder="0" allowfullscreen></iframe> </div></div>Thanks for the vid's Lowlight. Did you like how it preformed on paper? I'm just asking because GA said it will do 1/2 moa have you seen better?
Re: GAP Gladius
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: tlg308</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lowlight</div><div class="ubbcode-body"><iframe title="YouTube video player" width="640" height="390" src="http://www.youtube.com/embed/sPwXOUxCiGE" frameborder="0" allowfullscreen></iframe>
and another Gladius
<iframe title="YouTube video player" width="640" height="510" src="http://www.youtube.com/embed/15qj032UJ1I" frameborder="0" allowfullscreen></iframe> </div></div>Thanks for the vid's Lowlight. Did you like how it preformed on paper? I'm just asking because GA said it will do 1/2 moa have you seen better? </div></div>
If I remember correctly the gladius was the custom build they did for LL....which turned into one of their regular line up rifles for sale.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: tlg308</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lowlight</div><div class="ubbcode-body"><iframe title="YouTube video player" width="640" height="390" src="http://www.youtube.com/embed/sPwXOUxCiGE" frameborder="0" allowfullscreen></iframe>
and another Gladius
<iframe title="YouTube video player" width="640" height="510" src="http://www.youtube.com/embed/15qj032UJ1I" frameborder="0" allowfullscreen></iframe> </div></div>Thanks for the vid's Lowlight. Did you like how it preformed on paper? I'm just asking because GA said it will do 1/2 moa have you seen better? </div></div>
If I remember correctly the gladius was the custom build they did for LL....which turned into one of their regular line up rifles for sale.
Re: GAP Gladius
They are awesome rifles. I have engaged steel out to 1000 yards. With successful hits and surprising accuracy. I wasnt sure how the rifle would perform but I am very happy with it. It seems to be my go to rifle for 308 when I need a light, handy bolt gun. I take it almost everywhere when I leave for a trip that will involve shooting/hunting.
They are awesome rifles. I have engaged steel out to 1000 yards. With successful hits and surprising accuracy. I wasnt sure how the rifle would perform but I am very happy with it. It seems to be my go to rifle for 308 when I need a light, handy bolt gun. I take it almost everywhere when I leave for a trip that will involve shooting/hunting.
Re: GAP Gladius
It is the most accurate 308 I own. I get 2700+ with the hornady superformance 178gr match
As others have said it is a BAD little rifle!
It is the most accurate 308 I own. I get 2700+ with the hornady superformance 178gr match
As others have said it is a BAD little rifle!
Re: GAP Gladius
Such an awesome rifle. I already have my rifle worked on and also have plans for future builds. Would be a amazing build in 6.5x47L in my eyes.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: fastford</div><div class="ubbcode-body"> It is the most accurate 308 I own. I get 2700+ with the hornady superformance 178gr match
As others have said it is a BAD little rifle!
</div></div>
What are your load preferences for pushing those 178s that fast? I was expecting 2700+ for my "24 at best for 175s, i was looking at loads on 6mmBR.com and saw the 175 SMKs ranging from 2400-2753fps.
Such an awesome rifle. I already have my rifle worked on and also have plans for future builds. Would be a amazing build in 6.5x47L in my eyes.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: fastford</div><div class="ubbcode-body"> It is the most accurate 308 I own. I get 2700+ with the hornady superformance 178gr match
As others have said it is a BAD little rifle!
</div></div>
What are your load preferences for pushing those 178s that fast? I was expecting 2700+ for my "24 at best for 175s, i was looking at loads on 6mmBR.com and saw the 175 SMKs ranging from 2400-2753fps.
Re: GAP Gladius
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Blackops_2</div><div class="ubbcode-body">
What are your load preferences for pushing those 178s that fast? I was expecting 2700+ for my "24 at best for 175s, i was looking at loads on 6mmBR.com and saw the 175 SMKs ranging from 2400-2753fps. </div></div>Hornady Superformance is a factory load, getting insane speeds. Also it is a hot load- numerous reports of blown primers.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Blackops_2</div><div class="ubbcode-body">
What are your load preferences for pushing those 178s that fast? I was expecting 2700+ for my "24 at best for 175s, i was looking at loads on 6mmBR.com and saw the 175 SMKs ranging from 2400-2753fps. </div></div>Hornady Superformance is a factory load, getting insane speeds. Also it is a hot load- numerous reports of blown primers.
Re: GAP Gladius
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bm11</div><div class="ubbcode-body">Hornady Superformance is a factory load, getting insane speeds. Also it is a hot load- numerous reports of blown primers.</div></div>
Oh... i must've missed that part haha, i saw 178gr, 2700+, and 18" barrel and freaked out. Thanks for the heads up.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bm11</div><div class="ubbcode-body">Hornady Superformance is a factory load, getting insane speeds. Also it is a hot load- numerous reports of blown primers.</div></div>
Oh... i must've missed that part haha, i saw 178gr, 2700+, and 18" barrel and freaked out. Thanks for the heads up.
Re: GAP Gladius
the first few batches seemed to have loose primers, but i have no trouble with it. My AR's will NOT run it though
the first few batches seemed to have loose primers, but i have no trouble with it. My AR's will NOT run it though
Re: GAP Gladius
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Redmanss</div><div class="ubbcode-body">I decided months ago that one of these will follow my AW purchase. Damn is this "hobby" expensive......</div></div>
Haven't fully finished my first rifle and i've already added this one on my list after a sentinel build. Of course this will reside over the next decade or so. Absolutely love the look of the gladius. I realize it's not about aesthetics but that is one beautiful rifle.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Redmanss</div><div class="ubbcode-body">I decided months ago that one of these will follow my AW purchase. Damn is this "hobby" expensive......</div></div>
Haven't fully finished my first rifle and i've already added this one on my list after a sentinel build. Of course this will reside over the next decade or so. Absolutely love the look of the gladius. I realize it's not about aesthetics but that is one beautiful rifle.
Re: GAP Gladius
using someone elses ammo (i think it was lapua brass, 45 grains of varget and a 175 smk), i made a third round hit on a 21" plate at 1500 yards with a 18.5" barrel rifle i put together. is an 18" barrel ideal for 1k+ yards? no. but then again, neither is a 308. can it get there? sure.
you need to decide what your intended purpose is for the rifle before you can decide if the gladius is the right tool for the job.
using someone elses ammo (i think it was lapua brass, 45 grains of varget and a 175 smk), i made a third round hit on a 21" plate at 1500 yards with a 18.5" barrel rifle i put together. is an 18" barrel ideal for 1k+ yards? no. but then again, neither is a 308. can it get there? sure.
you need to decide what your intended purpose is for the rifle before you can decide if the gladius is the right tool for the job.
Re: GAP Gladius
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 300sniper</div><div class="ubbcode-body">using someone elses ammo (i think it was lapua brass, 45 grains of varget and a 175 smk), i made a third round hit on a 21" plate at 1500 yards with a 18.5" barrel rifle i put together. is an 18" barrel ideal for 1k+ yards? no. but then again, neither is a 308. can it get there? sure.</div></div>
You can always change calibers too. 18" would be an ideal go to rifle to me. Getting rid of pest, in an occasional practical long range match it would be a joy to carry. With a suppressor the OAL much more favorable compared to say a 24" or bigger.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 300sniper</div><div class="ubbcode-body">using someone elses ammo (i think it was lapua brass, 45 grains of varget and a 175 smk), i made a third round hit on a 21" plate at 1500 yards with a 18.5" barrel rifle i put together. is an 18" barrel ideal for 1k+ yards? no. but then again, neither is a 308. can it get there? sure.</div></div>
You can always change calibers too. 18" would be an ideal go to rifle to me. Getting rid of pest, in an occasional practical long range match it would be a joy to carry. With a suppressor the OAL much more favorable compared to say a 24" or bigger.
Re: GAP Gladius
Bad ass rifles, I have heard a lot of good things about all their guns, wish I could afford one
Bad ass rifles, I have heard a lot of good things about all their guns, wish I could afford one
Re: GAP Gladius
I'm glad to hear all the positive reviews.....I just picked one up from another hide member in the for sale section.
Can't wait to shoot it!!
http://www.snipershide.com/forum/ubbthre...563#Post2442563
I'm glad to hear all the positive reviews.....I just picked one up from another hide member in the for sale section.
Can't wait to shoot it!!
http://www.snipershide.com/forum/ubbthre...563#Post2442563
Re: GAP Gladius
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lofty</div><div class="ubbcode-body">I'm glad to hear all the positive reviews.....I just picked one up from another hide member in the for sale section.
Can't wait to shoot it!!
http://www.snipershide.com/forum/ubbthre...563#Post2442563</div></div> Congrats! let us know how it shoots.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lofty</div><div class="ubbcode-body">I'm glad to hear all the positive reviews.....I just picked one up from another hide member in the for sale section.
Can't wait to shoot it!!
http://www.snipershide.com/forum/ubbthre...563#Post2442563</div></div> Congrats! let us know how it shoots.
Re: GAP Gladius
I was thinking about having the rest of the rifle dipped in multicam....barrel, action, scope, rings.....everything but the bolt.
Anyone have any pics of an entire rifle done in multicam.... preferably dipped?
I was thinking about having the rest of the rifle dipped in multicam....barrel, action, scope, rings.....everything but the bolt.
Anyone have any pics of an entire rifle done in multicam.... preferably dipped?
Re: GAP Gladius
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DeSnifter</div><div class="ubbcode-body">What are your thoughts on a 20" version of this? I am debating between 18" and 20"</div></div>
I'm sure George would build you a 20" if you wanted one.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DeSnifter</div><div class="ubbcode-body">What are your thoughts on a 20" version of this? I am debating between 18" and 20"</div></div>
I'm sure George would build you a 20" if you wanted one.
Re: GAP Gladius
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Scrooge McDuck</div><div class="ubbcode-body">I want one in 6.5x47L or creedmore</div></div>
I was thinking the same Joe, but i've now switched plans to re-barrel my main rifle in 6.5x47L and save the Gladius as the go to .308. Not very practical but there is something sexy about 18"/20" rigs.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Scrooge McDuck</div><div class="ubbcode-body">I want one in 6.5x47L or creedmore</div></div>
I was thinking the same Joe, but i've now switched plans to re-barrel my main rifle in 6.5x47L and save the Gladius as the go to .308. Not very practical but there is something sexy about 18"/20" rigs.
Re: GAP Gladius
They are more "practical" then 26" rigs IMO. Good call though to do the 308 short
They are more "practical" then 26" rigs IMO. Good call though to do the 308 short
Re: GAP Gladius
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DeSnifter</div><div class="ubbcode-body">What are your thoughts on a 20" version of this? I am debating between 18" and 20"</div></div> I would go with the 20" and maybe a little heaver barrel, like an m40 contour.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DeSnifter</div><div class="ubbcode-body">What are your thoughts on a 20" version of this? I am debating between 18" and 20"</div></div> I would go with the 20" and maybe a little heaver barrel, like an m40 contour.
Re: GAP Gladius
anywhere from 18 to 24 inches will serve you. i like a medium aka standard palma contour
anywhere from 18 to 24 inches will serve you. i like a medium aka standard palma contour
Re: GAP Gladius
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: southpaw357</div><div class="ubbcode-body">anywhere from 18 to 24 inches will serve you. i like a medium aka standard palma contour </div></div>What is a Gladius contour?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: southpaw357</div><div class="ubbcode-body">anywhere from 18 to 24 inches will serve you. i like a medium aka standard palma contour </div></div>What is a Gladius contour?
Re: GAP Gladius
This may be a dumb question but... What does the 1.5" added onto the breach do for the rifle?
This may be a dumb question but... What does the 1.5" added onto the breach do for the rifle?
Re: GAP Gladius
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JSweezy</div><div class="ubbcode-body">This may be a dumb question but... What does the 1.5" added onto the breach do for the rifle?</div></div>
Depends on the caliber, but probably around 40 FPS.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JSweezy</div><div class="ubbcode-body">This may be a dumb question but... What does the 1.5" added onto the breach do for the rifle?</div></div>
Depends on the caliber, but probably around 40 FPS.
Re: GAP Gladius
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JSweezy</div><div class="ubbcode-body">This may be a dumb question but... What does the 1.5" added onto the breach do for the rifle? </div></div><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bward</div><div class="ubbcode-body">Depends on the caliber, but probably around 40 FPS. </div></div>It does nothing: An 18.5" barrel with a different contour is still an 18.5" barrel.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JSweezy</div><div class="ubbcode-body">This may be a dumb question but... What does the 1.5" added onto the breach do for the rifle? </div></div><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bward</div><div class="ubbcode-body">Depends on the caliber, but probably around 40 FPS. </div></div>It does nothing: An 18.5" barrel with a different contour is still an 18.5" barrel.
Re: GAP Gladius
I misread his post. Thought he was asking what adding 1.5'' of length would do to velocity.
I misread his post. Thought he was asking what adding 1.5'' of length would do to velocity.
Re: GAP Gladius
Well if it doesn't do anything whats the purpose of adding that 1.5 inches onto the breach?
Well if it doesn't do anything whats the purpose of adding that 1.5 inches onto the breach?
Re: GAP Gladius
If you watch the video of Chris Kyle where he is out shooting, he is using a Gladius ... he has the GAP Hat on and Multicam I believe in the news video
If you watch the video of Chris Kyle where he is out shooting, he is using a Gladius ... he has the GAP Hat on and Multicam I believe in the news video
Re: GAP Gladius
The standard breech length on a Remington Varmint contour is 2.0 inches. Depending on the tenon length and the recoil lug used, That does not leave a lot of room to chuck on in a vise for threading and chambering. The added breech length makes those processes much easier. It also allow the options of bedding the first inch of the barrel and setting the barrel back when the round count gets high.
The standard breech length on a Remington Varmint contour is 2.0 inches. Depending on the tenon length and the recoil lug used, That does not leave a lot of room to chuck on in a vise for threading and chambering. The added breech length makes those processes much easier. It also allow the options of bedding the first inch of the barrel and setting the barrel back when the round count gets high.
Similar threads
Firearms
GAP Gladius
