-
Having trouble using the site?
Contact support
Sidearms & Scatterguns Glock after market triggers and kits
- Thread starter wnroscoe
- Start date
Re: Glock after market triggers and kits
https://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=3073821#Post3073821
https://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=3073821#Post3073821
Re: Glock after market triggers and kits
Hands down the 3.5lb Ghost Rocket trigger connector along with a NY green spring. I would also go for that little extra and have a gunsmith polish the internals. This is an awesome set-up.
Hands down the 3.5lb Ghost Rocket trigger connector along with a NY green spring. I would also go for that little extra and have a gunsmith polish the internals. This is an awesome set-up.
Re: Glock after market triggers and kits
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TampaSS</div><div class="ubbcode-body">Hands down the 3.5lb Ghost Rocket trigger connector along with a NY green spring. I would also go for that little extra and have a gunsmith polish the internals. This is an awesome set-up. </div></div>
To each their own... I find the ghost stuff to be mushy and vague. I'd much rather have an untouched stock Glock trigger.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TampaSS</div><div class="ubbcode-body">Hands down the 3.5lb Ghost Rocket trigger connector along with a NY green spring. I would also go for that little extra and have a gunsmith polish the internals. This is an awesome set-up. </div></div>
To each their own... I find the ghost stuff to be mushy and vague. I'd much rather have an untouched stock Glock trigger.
Re: Glock after market triggers and kits
3.5 pound connector and the .25 cent trigger job is all that is really needed for me. I wouldn't do anything else (like by an expensive drop in kit) unless you need to shorten the reset. Google it, very easy.
3.5 pound connector and the .25 cent trigger job is all that is really needed for me. I wouldn't do anything else (like by an expensive drop in kit) unless you need to shorten the reset. Google it, very easy.
Re: Glock after market triggers and kits
http://www.midwayusa.com/product/153418/glockworx-race-connector-glock-all-models-2-lb
http://www.midwayusa.com/product/246023/...m_vc=S015153418
These two items are 20 dollars total and give a very light very smooth trigger pull. If that is what you want, then I would get them. I have them on a glock 26 and glock 19 and they are very nice. I can shoot much better with them installed.
I'll try to describe what the trigger pull feels like on these compared to my glocks without the trigger parts. The factory pull is somewhat light to start out with and then gets heavy and the travel almost stops right before the sear breaks and the gun is fired. With these two parts installed the trigger is a little lighter than the pull weight starting out as the factory trigger, but stays almost the same all the way until the shot. With these two parts installed you don't have the trigger pull get heavier right before the shot.
Also, it is very easy to polish the internal parts yourself with some help from some youtube videos.
http://www.midwayusa.com/product/153418/glockworx-race-connector-glock-all-models-2-lb
http://www.midwayusa.com/product/246023/...m_vc=S015153418
These two items are 20 dollars total and give a very light very smooth trigger pull. If that is what you want, then I would get them. I have them on a glock 26 and glock 19 and they are very nice. I can shoot much better with them installed.
I'll try to describe what the trigger pull feels like on these compared to my glocks without the trigger parts. The factory pull is somewhat light to start out with and then gets heavy and the travel almost stops right before the sear breaks and the gun is fired. With these two parts installed the trigger is a little lighter than the pull weight starting out as the factory trigger, but stays almost the same all the way until the shot. With these two parts installed you don't have the trigger pull get heavier right before the shot.
Also, it is very easy to polish the internal parts yourself with some help from some youtube videos.
Re: Glock after market triggers and kits
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Vereor</div><div class="ubbcode-body">The Fulcrum is the pinnacle of Glock triggers. If you get one, you will replace all of your triggers with them. </div></div>
THIS. I picked up the Fulcrum kit a couple of weeks ago and I have ran a little over 300 rounds without any issues. Trigger pull is a consistent 3 pounds and damn...I fell in love with my Glock all over again. I had some 1911 guys try it out and they were impressed and they are not Glock fans none the least.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Vereor</div><div class="ubbcode-body">The Fulcrum is the pinnacle of Glock triggers. If you get one, you will replace all of your triggers with them. </div></div>
THIS. I picked up the Fulcrum kit a couple of weeks ago and I have ran a little over 300 rounds without any issues. Trigger pull is a consistent 3 pounds and damn...I fell in love with my Glock all over again. I had some 1911 guys try it out and they were impressed and they are not Glock fans none the least.
Re: Glock after market triggers and kits
For a nice crisp 2.5lb Glock trigger do/get the following
.25 cent trigger job
Jäger Lightwieght Steel Striker, do not use a Ti one
Comp Spring Kit
Lone Wolf over travel adjustable ejector
Glock 17L 24 34/35 already have 3.5 disconnectors
There are some advanced mods that can be done to the trigger bar to shorten the pre travel and/or take the trigger done to 1.5lbs, but the basics I listed is all that needs to be down to get a great trigger on your Glock.
For a nice crisp 2.5lb Glock trigger do/get the following
.25 cent trigger job
Jäger Lightwieght Steel Striker, do not use a Ti one
Comp Spring Kit
Lone Wolf over travel adjustable ejector
Glock 17L 24 34/35 already have 3.5 disconnectors
There are some advanced mods that can be done to the trigger bar to shorten the pre travel and/or take the trigger done to 1.5lbs, but the basics I listed is all that needs to be down to get a great trigger on your Glock.
Re: Glock after market triggers and kits
Tons of options out there but it is very hard to top any of the Vanek products.
Excellent triggers and great service.
Tons of options out there but it is very hard to top any of the Vanek products.
Excellent triggers and great service.
Re: Glock after market triggers and kits
Has anybody used the Haley "skimmer" ? It's supposed to feel like a 1911 trigger with all Glock parts .
Has anybody used the Haley "skimmer" ? It's supposed to feel like a 1911 trigger with all Glock parts .
Similar threads
Sidearms & Scatterguns
Hellcat pro trigger upgrade?
