Good PORTABLE Steel Target Stand?
- Thread starter Turkeytider
- Start date
Not really bolt related but...
I got these brackets for cheap off Amazon, it was like 25 bucks for 6 sets a few years back. Then it’s just some emt tubing; its a hole to slide emt through for the cross piece and then two prongs that slide down inside the legs. They can also be screwed to a 2x4 if you dont mind that getting splintered up eventually.
If you have a welder I made a little brackets, three angled legs out of 3/4" square tubing that I can slide 1/2" rebar sections into. They are angled the same way the above are pictured. Must be old enough that I dont have pic on this phone anymore. But 1/2" rebar is a bit heavier weight and so unless you are hanging a full ipsc its probably a bit overkill to lug around.
Edit: here’s a clip from the background of a more recent pic of what I’m trying to describe even if its not all pictured
I got these brackets for cheap off Amazon, it was like 25 bucks for 6 sets a few years back. Then it’s just some emt tubing; its a hole to slide emt through for the cross piece and then two prongs that slide down inside the legs. They can also be screwed to a 2x4 if you dont mind that getting splintered up eventually.
If you have a welder I made a little brackets, three angled legs out of 3/4" square tubing that I can slide 1/2" rebar sections into. They are angled the same way the above are pictured. Must be old enough that I dont have pic on this phone anymore. But 1/2" rebar is a bit heavier weight and so unless you are hanging a full ipsc its probably a bit overkill to lug around.
Edit: here’s a clip from the background of a more recent pic of what I’m trying to describe even if its not all pictured
Last edited:
- TPost
- Steel Target of your choice
- MK Machining TPost Target Mount
www.mkmachining.com
I use these on my pistol range, and they’re excellent. Website has 5-packs at a discounted rate as well.
MK Machining sells steel as well if you need it, and he’s a member here (don’t remember his name).
- Steel Target of your choice
- MK Machining TPost Target Mount
Gen II T-Post Target Mount
Gen II T-Post Target Mount New Redesigned Gen II T-Post Target Mount. Lightweight and simple to use, our Gen II T-Post Mount now features a wrench cutout for 1/2-13 bolts and a one-piece design. Hang targets via a single spring-loaded carriage bolt for enhanced audibility and target ring. Our...
www.mkmachining.com
I use these on my pistol range, and they’re excellent. Website has 5-packs at a discounted rate as well.
MK Machining sells steel as well if you need it, and he’s a member here (don’t remember his name).
Depends on the target and how you have it configured, but a T post or two works good.
T Post Target Hangers (Best Prices) FREE Shipping @99$
ST7 T-POST HANGER is a super low cost option for hanging your ar500 steel targets using cheap T posts available just about anywhere.
shootingtargets7.com
Another T-post option. I have these and have not had any problems with targets falling/dropping. I've shot my plates with a wide variety of calibers from 22 LR up to 300 RUM and they've held strong with everything that has been thrown at them.
Grab a few set, toss them in your bag, a few t-posts and a pounder from your hardware/farm supply store of choice and you can set up a range wherever you've got the space.
