Gunsmithing Gunsmith for a bolt

[ralfabco]

I took a bolt apart, while I was in a hurry. I stepped on the back of the firing pin, by accident. It is slightly bent.


Does anybody know a superb gunsmith, who can fabricate a new item ?

I need to have the bent item fabricated.


Thanks

 

[Keith Johns]

Re: Gunsmith for a bolt

Just replace the bent part. Assembly parts are pretty cheap from PT&G.

 

[bohem]

Re: Gunsmith for a bolt

What rifle is it for? PTG doesn't make everything.

 

[ralfabco]

Re: Gunsmith for a bolt

It is for a specialized euro rifle, with low production #'s.

Erma SR-100

 

[_DE_]

Re: Gunsmith for a bolt

OUCH... That one will cost ya. might as well have a few done while you are at it.

 

[bohem]

Re: Gunsmith for a bolt

I know a very good CNC shop in Easton, PA who's gun friendly. It might not be the cheapest solution but the parts you get back will be right. Shoot me a PM if you want the contact info.

 

[japple]

Re: Gunsmith for a bolt

Gre tan gunsmithing makes great firing pin assemblies!

 

[ralfabco]

Re: Gunsmith for a bolt

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: japple</div><div class="ubbcode-body">Gre tan gunsmithing makes great firing pin assemblies! </div></div>

Do you have any contact information ?


Thanks
Ralph

 

[dksac2]

Re: Gunsmith for a bolt

Call Scott Null at S&S Sporting. He is one of the top riflesmiths in the country.

He will make or find what you need to get your rifle shooting. This guy is fantastic. I'm a retired Gunsmith and Scott is the best I've ever seen, and I was a darn good smith, so I speak from experience. He specializes in 1000 to 3000 yd Bolt rifles, but works on most anything.You bolt guys that like the really long range shooters, Scott has the unofficial 3000 yd record with one of his guns shooting 10 shots under 24" at 3000. It was a club shoot, not NRA or it would be official. He also designed the bullets and had them CNC made from Bronze.
You can reach him at 208-313-0715.

Best Regards, John K

 

[japple]

Re: Gunsmith for a bolt

www.gretanrifles.com

 

[bignada]

Re: Gunsmith for a bolt

Think you will need to dismantle the firing pin assy and straighten the pin. Might also need to buy a new FP or have one machined...

Hope you get that fine rifle back in action soon.

 

[ralfabco]

Re: Gunsmith for a bolt

Thanks for all the information !!!!!!