Sidearms & Scatterguns Handguns...show 'em
- Thread starter Forgetful Coyote
- Start date
$610 out the door at coastal Farms. Not an outstanding deal but then again not bad.
My summertime EDC kit: 9mm S&W M&P EZ, Streamlight ProTac, Buck 110 Lite. Pistol usually rides in the DeSantis IWB holster with a spare mag, appendix-carry. Nothing special, nothing custom! Just good solid kit!
G19 Gen4
Taran Tactical Fiber Optic Sight Set
Vickers Tactical Carry Trigger
Vickers Tactical Slide Stop
Minus Connector (4.5#)
All internals polished ($0.25 Trigger Job)
Pretty pleased with how this turned out for an EDCC. The Vickers Tactical Trigger and polishing the internals made the biggest difference.
Flew back home to rescue my can from jail, found a nice find in the used cabinet while out hanging with my family.
After 9 months of waiting, my Les Baer made it in (just a Concept III with a couple options).
Pardon the crappy cell phone pic.
Rounds 1-7 through it at 15 yards. I wish I could say that I'm going to get better with it, but this is about as good as I can do. I've got a total of 50 through the pistol now, so a lot more practice before it's broken in.
Of note: Mine came with Tripp Research Cobra Mags. Not sure when that started, but you really need a magwell to keep them aesthetically pleasing.
Pardon the crappy cell phone pic.
Rounds 1-7 through it at 15 yards. I wish I could say that I'm going to get better with it, but this is about as good as I can do. I've got a total of 50 through the pistol now, so a lot more practice before it's broken in.
Of note: Mine came with Tripp Research Cobra Mags. Not sure when that started, but you really need a magwell to keep them aesthetically pleasing.
SIG P226/P229 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR / Holosun Holes - Filler Plate for Trijicon RMR / RMR HD / SRO / RCR / Holosun 407C / 507C / C&H EDC-XL / COMP / COMP MAX - C&H Precision
SIG P320 w/ R1P / DPP CUT w/ RMR / Holosun Holes - Filler Plate for RMR / SRO / Holosun. CHPWS C&H PRECISION WEAPONS
chpws.com
Thank you.SIG P226/P229 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR / Holosun Holes - Filler Plate for Trijicon RMR / RMR HD / SRO / RCR / Holosun 407C / 507C / C&H EDC-XL / COMP / COMP MAX - C&H Precision
SIG P320 w/ R1P / DPP CUT w/ RMR / Holosun Holes - Filler Plate for RMR / SRO / Holosun. CHPWS C&H PRECISION WEAPONSchpws.com
I used same on an AXG despite all the negative feedback,
Seems to be working okay but I did get new screws and not use the supplied ones. I didn’t like the angle on the head.
I would be wary of them. There was a big thread a while back.
CHPWS RMR plates are JUNK and their customer service is just as bad
I purchased two of their Sig M17/M18 plates and attempted to install them today. The first issues was the rear sight which they sell and supplied and the plate is supposed to be cut for. The angle of the dovetails are significantly different. I've installed hundreds of sight sets and I fit...
www.snipershide.com
Mine fits prefect and the screws were the correct thread and length. Without their product the RMR wouldn't have worked properly since its a lot smaller then the Sig cut out on the slide.I would be wary of them. There was a big thread a while back.
CHPWS RMR plates are JUNK and their customer service is just as bad
I purchased two of their Sig M17/M18 plates and attempted to install them today. The first issues was the rear sight which they sell and supplied and the plate is supposed to be cut for. The angle of the dovetails are significantly different. I've installed hundreds of sight sets and I fit...www.snipershide.com
This one has been big fun.
I really like the heft of it….stable as hell and stupid fast recovery.
Just added the rear sight….not even sure why….it won’t be a carry gun.
Gun is crazy fast.
Targets below are rapid fire…just letting it ride.
Truly a gun that anyone could shoot well.
I really like the heft of it….stable as hell and stupid fast recovery.
Just added the rear sight….not even sure why….it won’t be a carry gun.
Gun is crazy fast.
Targets below are rapid fire…just letting it ride.
Truly a gun that anyone could shoot well.
Last edited:
Doing a bit of recoil spring tuning this afternoon...
I'm temporarily running irons, as Its old RMR took a trip back to the factory to fix an issue with random blinking on/off. We'll fix that as soon as the new SRO arrives.
I'm temporarily running irons, as Its old RMR took a trip back to the factory to fix an issue with random blinking on/off. We'll fix that as soon as the new SRO arrives.
My Glock 45 MOS
- DIY Stipple
- DIY Trigger Polish
- OEM "-" Connector, NP3 Coated
- OEM Safety Plunger, NP3 Coated
- Radian Afterburner + Ramjet
- Kägwerks raised slide release
- Glock OEM Extended Mag Release
- Trijicon RMR Type 2
- Trijicon Suppressor Height Night Sights
- SLR Magwell
- Surefire X300 Utra
All those guns that look like they've never been used..........
Yeah, my comp, muzzle, and light are covered in carbon because I color them with a pencil when I'm bored.
Did some plinking with the FN 502 and one of my Oculus 22 demo cans. The long config of this suppressor is superb, but the short config barks a bit louder than I'd like for extended shooting sessions (it's fine for short strings, though). While it's nice to have options, I think the long config will account for the vast majority of my pistol shooting.
I've had difficulty getting the 502 to run for any length of time with a suppressor, but after the last cleaning I used a generous amount of Mobil 28 grease on all the wear points and it ran flawlessly.
G19 gen 5 MOS with some Wilson Combat work. Holosun 508T.
GP100MC .357 w/Leopold Deltapoint V1. One of the most accurate guns I’ve ever shot.
Which strap is that on your Speedy? That's pretty much exactly what I'm looking for.Home built 1911
Sorry I don't remember. I have too many straps for this watch and there's no marking on the back of this one.
Let‘s see how I fare with it at this weekend’s USPSA match.
99% percent made from stock metals. Only things not made by me are the wood grips, sights, and barrel. Everything else, screws, springs, lower and slide, and all internal parts were made from scratch.
At 25 yards have a 2 inch shot group or better.
(Edited for typo...)
Last edited:
Wife and I picked up a few this week. we should have them in hand next week.
3rd model 44 spec HE / Model of 1926 4” (1929 production)
27-2 3.5”
14-1 / K38 Target Masterpiece 6” (1961-62 production)
3rd model 44 spec HE / Model of 1926 4” (1929 production)
27-2 3.5”
14-1 / K38 Target Masterpiece 6” (1961-62 production)
Last edited:
Complements from the Western Conference Pension Fund of the International Brotherhood of Teamsters.
New edc, one of the best factory trigger pulls I have ever felt besides being plastic, lol.
Last edited:
Similar threads
