Sidearms & Scatterguns Handguns...show 'em

[...]

SW 69- 44MAG.
SW 637 - .38SPL
Ruger LCRx - .38SPL

SW 64 - .38SPL

"The twins" Ruger Bisley Vaquero - .45LC

the J-frame gets carried with me more or less everywhere......with one of the others on usually the belt.

the SW69 is quite frankly one of the best 44 magnums on the market.

the SW64 is my "peacocking" gun......planning on having it engraved, and getting a nice set of grips made from some sort of animal remnants....

the Ruger LCR is possibly one of the best carry revolvers on the market......very light and disappears on your belt, and the factory trigger is amazing for the price.

 

[Mike 556]

SW 69- 44MAG.
SW 637 - .38SPL
Ruger LCRx - .38SPL
View attachment 6901216


SW 64 - .38SPL
View attachment 6901217

"The twins" Ruger Bisley Vaquero - .45LC
View attachment 6901219


the J-frame gets carried with me more or less everywhere......with one of the others on usually the belt.

the SW69 is quite frankly one of the best 44 magnums on the market.

the SW64 is my "peacocking" gun......planning on having it engraved, and getting a nice set of grips made from some sort of animal remnants....

the Ruger LCR is possibly one of the best carry revolvers on the market......very light and disappears on your belt, and the factory trigger is amazing for the price.

Hey Mac, great selection of wheel guns! Does Ruger have the LCR in 9mm? All my handguns are either 45 or 9mm and one leftove 38 super from the IPSC days. I'd be interested in a carry revolver in 9mm.
Mike

 

[...]

Hey Mac, great selection of wheel guns! Does Ruger have the LCR in 9mm? All my handguns are either 45 or 9mm and one leftove 38 super from the IPSC days. I'd be interested in a carry revolver in 9mm.
Mike

they do....unfortunately not in the 3" however.

Exposed hammer
https://www.ruger.com/products/lcrx/specSheets/5464.html

Shielded hammer
https://www.ruger.com/products/lcr/specSheets/5456.html


the grip angle on the LCR is very steep......if you like 1911s it feels very similar.

 

[Dougie308]

Figured since we gotta Bolt rifle and Semi auto picture thread in their respective sections, we ought to have a handgun pic thread to go along with em so..

Carry guns, race guns, hunting guns, old school collectible pieces, etc.. whatever ya got/wanna show off - lets see it! Maybe(hopefully?) if we get enough posts, we can turn this into a sticky..

 

[Frankly]

My Atlas Gunworks 1911 was lonely so I got it a big brother 2011. Both 9mm.

Now to get another pair in 45.

 

[Mike 556]

View attachment 6902794

My Atlas Gunworks 1911 was lonely so I got it a big brother 2011.

Nice ! How do you like the flat faced trigger?
Mike

 

[Mike 556]

Nice duo Dougie. Where did you get the 17 in camo? What dot on the FN?
Mike

 

[Frankly]

Nice ! How do you like the flat faced trigger?
Mike

I like it better, I find that I get a more consistent press even if my finger isn't perfectly consistent. It's more forgiving. There are arguments both ways though and no clear consensus.

My AR has a flat trigger too but my Glocks and shotguns still have conventional faces, as does my long range rifle. It's not slowing me down.

 

[Dougie308]

Nice duo Dougie. Where did you get the 17 in camo? What dot on the FN?
Mike

The camo one is a Gen 2 Glock 17 that I Duracoated. The FNX has a Trijicon RMR with the 12 MOA green triangle.

 

[Mike 556]

I like it better, I find that I get a more consistent press even if my finger isn't perfectly consistent. It's more forgiving. There are arguments both ways though and no clear consensus.

My AR has a flat trigger too but my Glocks and shotguns still have conventional faces, as does my long range rifle. It's not slowing me down.

I have two flat triggers- Hiperfire 24c - on my 9mm carbines. I'm in the same boat as you, really like them. All my other weapons have conventional curved triggers, and I don't see much difference going from one to the other. Might have to try a flat faced on a pistol, as I agree with you. I believe the flat faced are a little more forgiving.
Mike

 

[Mike 556]

The camo one is a Gen 2 Glock 17 that I Duracoated. The FNX has a Trijicon RMR with the 12 MOA green triangle.

Good job on the duracoat. The Trijicon looks awesome riding on the FNX!
Mike

 

[LibertyArms]

Couple 1911s for fun. @ 45's and 9mm 2011

 

[Mike 556]

Couple 1911s for fun

Amazing 1911s! Nice work. The case for the first one is incredible! What is the skin? Love the pocket watch and money clip! That would be mine after paying for those 1911s- empty!
Mike

 

[LibertyArms]

Thanks. Wanted to try to make an executive pistol and case, once finished did not want to sell so have it to grandfather. Holster and money clip are elephant , case was ostrich. Made the take down tool handles from mother of pearl. Grips from African burl. And had a local company make a pen from the same group wood. Im a terrible case maker lol. It was a watch case that i modified.

 

[M113A3]

I love reloading for my 586.

 

[NHPiper]

Couple from my collection. Left to right:

Dan Wesson Discretion w. RM06, STI 2011 COSTA HOST w. RM06, Glock 19 from United R&D w. RM01, Glock 17 w. RM01.

 

[buffalowinter]

 

[Mike 556]

View attachment 6903281

WTF! Looks like some kind of medieval weapon! Gotta be a story behind it. Care to share it?
Mike
Mike

 

[buffalowinter]

WTF! Looks like some kind of medieval weapon! Gotta be a story behind it. Care to share it?
Mike
Mike

Not mine, got the pic off an internet search for zip gun. Just thought I'd throw it out there as a joke. Interestingly enough, the only thing illegal about it (your state/local laws may vary) are the brass knuckles.

 

[Mike 556]

Not mine, got the pic off an internet search for zip gun. Just thought I'd throw it out there as a joke. Interestingly enough, the only thing illegal about it (your state/local laws may vary) are the brass knuckles.

Good, was starting to worry you where carrying that thing around!
Mike

 

[redneckbmxer24]

Thanks. Wanted to try to make an executive pistol and case, once finished did not want to sell so have it to grandfather. Holster and money clip are elephant , case was ostrich. Made the take down tool handles from mother of pearl. Grips from African burl. And had a local company make a pen from the same group wood. Im a terrible case maker lol. It was a watch case that i modified. View attachment 6903101View attachment 6903102

This is awesome. So baller.

 

[LibertyArms]

I cant edit the above for pics to show up

 

[Wyzrd]

Yeah buddy! I gotta admit, I skeeted in my pants when I saw those DW V-Bobs & Guardian...???... Perfect carry 1911’s IMO! Very nice sir!

 

[cattleman99]

 

[Frankly]

Defense Glock 19s nearly matching, one in the electronic box, other close at hand. I'm not going to waste (and lose) a 2011 on a criminal.

Trijicon night sights, DIY stipling, Magpul magwell, one has an Apex trigger set that isn't worth the money. I have a couple Kydex holsters that I keep them in. I downgraded from having fancier Glocks, they aren't bullseye or competition guns so why put so much money into them?

 

[Srikaleak]

My two pistols. Bought a whole lotta different guns before ending up with these two. I know they are old and outdated and definitely not ergonomic but I can shoot pretty damn well with 'em and that's what matters to me. Got a 30rd fun stick for it too and man that thing puts a smile on my face. As for as improvements, I've just put night sights on 'em (need to install on the USP) and they are GTG.

 

[CSTactical]

 

[BKSSNIPER]

EAA Witness Hunter 10mm
Glock 17 in Mean Gene Leather Holster
RIA TAC Ultra 2011 10mm 6”
GLOCK G40 w Vortex 3 MOA

 

[Langford]

Newest addition, Sig p232 stainless. Got the walnut Nill grips in from Germany this afternoon, love how it turned out.

 

[Mj1995]

Heres my g22 carry gun. Converted to 357 sig with a love wolf barrel, zev tech mag extension and magwell, tlr1hl. I carry it in a las concealment ronin 2.0l holds 19+1 with the extensions. Hopefully soon I can send it off for slide work and I'll do some frame work on it.

 

[myronman3]

top is a magnum research bfr 44 magnum that i thinned the front sight on and did a poor boy's trigger job on. next is a ruger mid-frame 44 special that i put ebony grips on. i removed the front sight, filed the. base flat and hand cut a dovetail into. i then fitted it with a .500 high gold bead front sight. poor boy's trigger job.
next is my freedom arms 44 special model 97.
all three shoot well. they make me look GOOD.

 

[myronman3]

the picture is decieving.....the bfr is by far way bigger than the other two. the FA is the smallest of the group.

 

[etn1type]

My Sig X-Carry and X5

 

[Frog05]

Sig P320 Carry (small grip module) with Inforce APLc. DIY stippling job, Gray Guns PELT 2 trigger.

 

[etn1type]

My Max Michel twins (9mm and 45 ACP).
FN FNX 45 Tacitcal, STI Edge 2011 in 45 ACP, Dan Wesson Specialist Stainless in 9mm, and my now sold Dand Wesson Eco in 45 ACP
My Sig Nitron Deployment 1911, Sig Extreme 1911 (first 1911, best 1911), now sold Sig Scorpion 1911, Sig P226 MK25 TB w/ Hogue Grips, and now sold Sig Nightmare Fastback 1911. I have a thing for Sigs. Not pictured is my Glock build that I can never seem to finish.

(Sorry for the multi-post, internet on the ship is trash).

 

[fdkay]

turn that scope around before you mount it.

 

[CSTactical]

turn that scope around before you mount it.

 

[Gooldylocks]

Finally a thread i can contribute to without sounding like an idiot

 

[Gooldylocks]

My Atlas Gunworks 1911 was lonely so I got it a big brother 2011. Both 9mm.


Now to get another pair in 45.

Get 40s next time! Atlas builds some cool looking guns for sure.

 

[Mooncake]

This is a PD trade in P7M13 I had done in color case hardening and master blue. One of my favorites.

 

[Jackalope]

The ol’ BATF serial grey frame glock. Ameriglow hackathorne sights, Vickers bits and a TLR-7.

 

[ChadL]

I picked this up the other day. I wanted a relatively inexpensive 1911. I own a couple Springfield XDm pistols and have been very happy so I thought I would give a Springfield 1911 a go. This is the Range Officer Elite model. I added a TLR-7 light.

 

[DXT_Shooter]

CZ Shadow Orange 9mm

 

[PBWalsh]

G26gen4, Pierce + 2 magazine extender. Hope to pick up a 17 or 34 gen 5 next year.

Some gorgeous handguns on here.

 

[2Akeepers]

TRP

 

[drglock]

Glock 19
Slide Work done by Loki Tactical and frame work done by Weichel Armament.

 

[spife7980]

And an action shot from pretty much the only time I use it, going in to the brush after something wounded and just because a baby glock with a can is awesome.

 

[Ironcreek]

Here's 2 CZ75's. I just started carrying the compact on a daily basis.

 

[truth]

 

[fastfwd]

Such pretty guns in this thread.

I only shoot two pistols these days -- the Ruger Standard ("MK I") that my dad gave me on my 13th birthday, and an FN FiveSeven with a bunch of crap bolted onto it. I really like them both and the Ruger has sentimental value to me, but neither one is special in any objective way. Someday I'd like to have something fancy like the showpiece 1911s you guys are posting.

It's funny, the FiveSeven -- even with the light/laser and RMR -- weighs the same fully loaded as the Ruger weighs empty.

EDIT: Just weighed them both. Loaded FiveSeven is actually a few grams lighter than the empty Ruger.