I've been meaning to get around to writing a review on this particular scope. I will try to be subjective and point out it's pros and cons for this review. The models in the Tactical Series offer variable power in 4.5-14x42, 6.5-20x42 and 8.5x25x42, with a fixed 10x42 to round it up. It’s a 30mm tube design with a 42mm objective lens so make sure you’ve got the proper rings and bases of adequate height. In my example I'm using on my Dtech AR Ruger .204 using model #HK4030 8.5-25x42 with the 10 1/2 mil dot reticle, illuminated in red or green.The eye relief is 3 1/2" but I'll comment on that more later. I presently own three of these scopes in various powers. One is on my .204 and the other is on my 6mmPPC, the third is on the shelf for a TAC 17 upper coming from Dtech next month.
What's in the box?
Well, for starters, it comes in a very nice hard case with cut out foam inserts. I was kind of surprised when I opened the box and saw this. Kind of nice touch in my opinion...
Inside the box, you see the scope, 4" sun shade, lens cleaning cloth, metal lens covers, a spare battery for the illuminated reticle, tools for turret adjustment, a removable large wheel for parallax adjustment, and owners manual. Again, nice accouterments with this scope for the price range.
Here's a close up of the removable parallax wheel and the second ring clamps to the scope as a dial indicator for the parallax wheel. My comments on this parallax wheel are a mixed bag. This particular design is a pain in the rump to install and get it set up right, but once it is installed, it performs flawlessly. These type of exaggerated parallax focus wheels are more common in the air gun world than the center fire cartridge shooters. With that said, now that I actually opened up mind and decided to give it a try, the daggone thing works really nice. I actually prefer it rather than fishing around for the small wheel or rotating the front ocular bell on my other scopes. When ever I pull this AR out and others see this, I get the same response, "what the heck is that?" :lol:
Here's a pic of the screw on lens covers. It comes with one for both ends of the scope. If you opt to use the 4" sun shade, it will not accept the lens cover. I thought that was rather odd and kind of wish it did.
OK, let's move on to the clarity and reticle. I'll try to explain my perspective on why I chose this particular set up. The reticle is very, very fine and could be a problem in low light conditions. It's so fine that I had some issues getting my camera to focus on the reticle. These pictures are not a true representation of the clarity of the reticle. The reticle is very sharp because it's etched into the glass. Here's a picture of the reticle against a light background. The view was crisp & clear across through the whole diameter of visible area. This picture is at 8.5 power at 100 yards and again, please don't judge the clarity on my pictures.
<more to come>
What's in the box?
Well, for starters, it comes in a very nice hard case with cut out foam inserts. I was kind of surprised when I opened the box and saw this. Kind of nice touch in my opinion...
Inside the box, you see the scope, 4" sun shade, lens cleaning cloth, metal lens covers, a spare battery for the illuminated reticle, tools for turret adjustment, a removable large wheel for parallax adjustment, and owners manual. Again, nice accouterments with this scope for the price range.
Here's a close up of the removable parallax wheel and the second ring clamps to the scope as a dial indicator for the parallax wheel. My comments on this parallax wheel are a mixed bag. This particular design is a pain in the rump to install and get it set up right, but once it is installed, it performs flawlessly. These type of exaggerated parallax focus wheels are more common in the air gun world than the center fire cartridge shooters. With that said, now that I actually opened up mind and decided to give it a try, the daggone thing works really nice. I actually prefer it rather than fishing around for the small wheel or rotating the front ocular bell on my other scopes. When ever I pull this AR out and others see this, I get the same response, "what the heck is that?" :lol:
Here's a pic of the screw on lens covers. It comes with one for both ends of the scope. If you opt to use the 4" sun shade, it will not accept the lens cover. I thought that was rather odd and kind of wish it did.
OK, let's move on to the clarity and reticle. I'll try to explain my perspective on why I chose this particular set up. The reticle is very, very fine and could be a problem in low light conditions. It's so fine that I had some issues getting my camera to focus on the reticle. These pictures are not a true representation of the clarity of the reticle. The reticle is very sharp because it's etched into the glass. Here's a picture of the reticle against a light background. The view was crisp & clear across through the whole diameter of visible area. This picture is at 8.5 power at 100 yards and again, please don't judge the clarity on my pictures.
<more to come>