Rifle Scopes HDMR guys with M24 barrel. Need ring size

[taseal]

I don't have the rifle right now because the gunsmith is working on it. He said the lows won't fit, but right now he has it apart again because he's going to paint the barrel etc...

so I wanted to know what size rings you are running with the M24 barrel (mine is a rock creek)

I think mediums will clear. I'll be using Warne rings. High might be little too much. I am using butler creeks too though.

I can get scope and my low ring dimensions if needed. can't get the rail height though
Thanks guys.

 

[Mahk]

Re: HDMR guys with M24 barrel. Need ring size

Seekins lows will clear and they are .92", so whatever the Warne equivalent is.

 

[tipper]

Re: HDMR guys with M24 barrel. Need ring size

What base mount?

 

[tipper]

Re: HDMR guys with M24 barrel. Need ring size

ttt

 

[tipper]

Re: HDMR guys with M24 barrel. Need ring size

ttt

 

[frankythefly]

Re: HDMR guys with M24 barrel. Need ring size

Low seekins with a flat base(0 moa) leaves a little more than a 1/4 inch clearance with HDMR and Butler Creeks (Krieger MTU Barrel)

 

[Mahk]

Re: HDMR guys with M24 barrel. Need ring size

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: tipper</div><div class="ubbcode-body">What base mount? </div></div>

IOR 20 MOA, should clear Butler Creek caps with any similarly sized 20 MOA base.

 

[taseal]

Re: HDMR guys with M24 barrel. Need ring size

Mine is TPS 20 moa.

So I think my low might clear then... I guess I'll wait til the rifle comes here, then see...

Seek ins low .92 for what, the height from bottom to top? Bottom to center? I'll measure my warne, but it's probably very close to same.