help w/ recoil pad for Zel PRS adapter

#3
Re: help w/ recoil pad for Zel PRS adapter

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: vkc</div><div class="ubbcode-body">I think they were specially made for Zel.

http://www.tactilite.com/Magpul-PRS-Stock-with-Pachmayr-Pad-p/rp-0034.htm </div></div>

i think the pachmayrs are, but i found some people that put on the limbsavers but im not sure what one.
 
#4
Re: help w/ recoil pad for Zel PRS adapter

Its a Pachmayr F325 Large Field Pad, if its straight out of the box with no fitting it's easy. Give limbsaver a call to cross ref. F325 to there model.
 
#5
Re: help w/ recoil pad for Zel PRS adapter

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AGBM</div><div class="ubbcode-body"> Its a Pachmayr F325 Large Field Pad, if its straight out of the box with no fitting it's easy. Give limbsaver a call to cross ref. F325 to there model. </div></div>

awesome thanks!
 
#7
Re: help w/ recoil pad for Zel PRS adapter

Been down this road. I had a Zel PRS adapter on my OBR with a Limbsaver Grind-to-Fit pad. Below is what I had ordered from Brownells to make this work.

100-006-322
TACTILITE M/P ADAPTER

902-000-074
10543 LIMBSAVER LARGE GRIND-TO-FIT PAD

I had ordered the adapter alone (it can be ordered with a Pachmayr pad attached), because I had read in other places the Limbsaver pad was a significant improvement over the Pachmayr due to its construction (Navcom polymer etc).

I recommend this combo. The Limbsaver pad is very comfortable.

Hope this helps.
 
#8
Re: help w/ recoil pad for Zel PRS adapter

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: zenghost</div><div class="ubbcode-body">Been down this road. I had a Zel PRS adapter on my OBR with a Limbsaver Grind-to-Fit pad. Below is what I had ordered from Brownells to make this work.

100-006-322
TACTILITE M/P ADAPTER

902-000-074
10543 LIMBSAVER LARGE GRIND-TO-FIT PAD

I had ordered the adapter alone (it can be ordered with a Pachmayr pad attached), because I had read in other places the Limbsaver pad was a significant improvement over the Pachmayr due to its construction (Navcom polymer etc).

I recommend this combo. The Limbsaver pad is very comfortable.

Hope this helps. </div></div>

you didnt have to grind it down did you? did you take a look at the 10101 rem 700 pad?
 
#9
Re: help w/ recoil pad for Zel PRS adapter

I did not grind down the pad - just mounted it and went with it. From what I recall, I could have done some minor grinding to make it conform perfectly to outline of the adapter but did not feel it was warranted.

I am trying to recall why I did not go with the 10101 pad. I do know that I read quite a bit on this (including other sites) before taking the plunge.

Here is some additional threads on the subject from various locations:

http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1182484

If I recall correctly, mine ended up fitting like the second to the last picture on the first page of the following thread:

http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2824938
 
#10
Re: help w/ recoil pad for Zel PRS adapter

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: zenghost</div><div class="ubbcode-body">I did not grind down the pad - just mounted it and went with it. From what I recall, I could have done some minor grinding to make it conform perfectly to outline of the adapter but did not feel it was warranted.

I am trying to recall why I did not go with the 10101 pad. I do know that I read quite a bit on this (including other sites) before taking the plunge.

Here is some additional threads on the subject from various locations:

http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1182484

If I recall correctly, mine ended up fitting like the second to the last picture on the first page of the following thread:

http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2824938


</div></div>

ah awesome - so this guy then?
0bb647b1.jpg
 
#11
Re: help w/ recoil pad for Zel PRS adapter

Yes, I believe that was it. You can see where there is a little edge protruding from the pad over a portion of the adapter, but it is negligible in my opinion. If it was an issue, I'd simply round that edge a bit instead of wholesale grinding operation. The Limbsaver's recoil absorbing polymer is nice. Though I am no engineer, it seemed ideal for its intended purpose to me. Here is some background info on it - appears to be more than just rubber.

http://www.limbsaver.com/2010/pdfs/news/NAVCOMStory.pdf
 
#13
I have recently had shoulder surgery and the .308 seems to kick a little harder than it used to lol. I am glad I came across this Brownell's is sold out so I may have to go direct from ZEL
 
Last edited:
You must log in or register to reply here.

Similar threads

Rpatton73
Accessories FOR SALE!! **UPDATED 02/08/2025** OPTICS, MOUNTS, RINGS, RAILS, RED DOTS, MAGNIFIERS, BUIS, GRIPS, STOCKS, TRIGGERS, MONO/BIPODS, LIGHTS, ADAPTERS ETC
Replies
8
Views
862
spoon063
spoon063
Rpatton73
Optics FOR SALE!! **UPDATED 02/08/2025** OPTICS, MOUNTS, RINGS, RAILS, RED DOTS, MAGNIFIERS, BUIS, GRIPS, STOCKS, TRIGGERS, MONO/BIPODS, LIGHTS, ADAPTERS ETC
Replies
0
Views
212
Rpatton73
Rpatton73
Rpatton73
Accessories FOR SALE!! **UPDATED 02/07/2025** - MOUNTS, RINGS, RAILS, RED DOTS, MAGNIFIERS, BUIS, GRIPS, STOCKS, TRIGGERS, MONO/BIPODS, LIGHTS, ADAPTERS ETC
Replies
1
Views
270
MolonLabe1977
MolonLabe1977
Rpatton73
Optics FOR SALE!! **UPDATED 02/07/2025** OPTICS, MOUNTS, RINGS, RAILS, RED DOTS, MAGNIFIERS, BUIS, GRIPS, STOCKS, TRIGGERS, MONO/BIPODS, LIGHTS, ADAPTERS ETC
Replies
2
Views
353
weekend_warlord
W
Rpatton73
Accessories **UPDATED ACCESSORIES FOR SALE 04/12/2025** MAGAZINES, UPPERS, BARRELS, BOLT CARRIERS, TRIGGERS, GRIPS, STOCKS, BI/MONOPODS, HAND GUARDS, ETC.
Replies
1
Views
276
Chester2A
C
Top Bottom
Back
Home
Forums
Merch
Alerts