• Win an RIX Storm S3 Thermal Imaging Scope!

    To enter, all you need to do is add an image of yourself at the range below! Subscribers get more entries, check out the plans below for a better chance of winning!

    Join the contest Subscribe

Hi From Maine

Tyguy85

Private
Minuteman
Feb 11, 2025
4
0
ME
Hi all new to the group.

I am finishing up a LMT MWS 308 build. I haven't really seen anyone doing something like this so figured I would see what the feedback was. I have a TA11 Acog with donut of death reticle, QD mounted and plan on using that for most things with this LMT. However I also have a bolt action Montana X2 and wanted to see if there was a way to share an optic with both my LMT and my Montana. In case I want to shoot further out with the LMT on the range.

I found a killer deal on a S&B Polar 96 2.5-10 with a Zeiss ZM rail mount. These are very common in Europe but never really caught on in the US, which I never understood. Great thing with this setup is no need for scope rings, so using pic rail mounts on my bolt action, I can swap between my LMT and Montana, without needing to change a thing with the scope mount. QD mount lines up perfectly on both platforms. I needed to get a cheek riser for the bolt action but I actually like it better that way anyways so it all worked out.

Only issue will be needed to zero the scope each time but I am curious to see how off it will actually be between the two.

Thoughts? Thanks!
 

Attachments

  • PXL_20250314_155328722.jpg
    PXL_20250314_155328722.jpg
    941.5 KB · Views: 3
  • PXL_20250314_155325586.jpg
    PXL_20250314_155325586.jpg
    898.5 KB · Views: 2
  • PXL_20250314_155319968.jpg
    PXL_20250314_155319968.jpg
    685.3 KB · Views: 2
  • PXL_20250314_155621536.jpg
    PXL_20250314_155621536.jpg
    723.9 KB · Views: 2
  • PXL_20250314_155632407.jpg
    PXL_20250314_155632407.jpg
    810.8 KB · Views: 2
  • PXL_20250314_155315804.jpg
    PXL_20250314_155315804.jpg
    750.9 KB · Views: 3