I was getting good results in my LMT MWS with the Hornady 140 gr and 147 gr ELD-M bullets and thought I would try their 130 gr EDL-M bullets. I did a ladder and fired loads with Varget at 35.8, 36.3, 36.8, 37.3, 37.8. I was getting excellent results with 36.3 gr of Varget with groups opening up significantly above 37.8 gr. There were no pressure signs with any of the loads.
I used Hornady’s 10th Edition for all my load data, but was very surprised today to see Hodgdon’s maximum load for a 130 gr bullet with Varget was below Hornady’s minimum load for the same combination. Could this be right?
I used Hornady’s 10th Edition for all my load data, but was very surprised today to see Hodgdon’s maximum load for a 130 gr bullet with Varget was below Hornady’s minimum load for the same combination. Could this be right?