Rifle Scopes How do I mount a Burris fast fire to lwrc repr

[adam1122]

Ok, as you all know hopefully i have a lwrc repr with 20in barrel. As of tomorrow it will have a us optics 1.8x-10x-35 illuminated scope on it. The entire top of the gun is all pica tinny rail. My question is....if i wanted to mount a Burris fast fire mini redot sight on my weapon where would i be able to mount it. I don't think the scope has enough room on the front for an arms type attachment where i could just it to the top of the scope. Will I need to find one of the Predator Burkett offset mounts and put it on the top rail somewhere?

Any ideas would be appreciated.

Thanks guys.

Adam

 

[sobrbiker883]

Re: How do I mount a Burris fast fire to lwrc repr

You have the right answer already, the Burkett mount at 1:00 is perfect in my opinion.

 

[adam1122]

Re: How do I mount a Burris fast fire to lwrc repr

Where would I mount it? Underneath the scope or just out in front of the objective?

 

[CCCCanuck]

Re: How do I mount a Burris fast fire to lwrc repr

What about mounting it on a side rail as far back as possible?

 

[adam1122]

Re: How do I mount a Burris fast fire to lwrc repr

Not a bad idea....I won't know if this possible until I mount my new us optics scope. I don't know how much eye relief i will need until I mount the scope. Ive got a detachable buis so I'd like to keep that on. Great idea....I'll see if I can make that work.

 

[sobrbiker883]

Re: How do I mount a Burris fast fire to lwrc repr

Lots of folks like them up close, but I like them out on the forend, so I can "box" the target with the MRD, then either fire when centered or actually focus on the dot if a more precise point is needed.

The former is a reason I really like the Burkett mount, as it is at 1:00 in relation to the bore, so if I have a good cheekweld, and roll the rifle my alignment with the sight won't change.

I'm not a fan of MRD's mounted to scope tubes and such, because the cheekweld is different, therefore aiming is not as intuitive (for me).

 

[pharm762]

Re: How do I mount a Burris fast fire to lwrc repr

I used a Daniel Defense offset mount and put the standard rail mout on the FastFire. I think Larue makes an offset mount for that but I ak not too sure.

 

[marshallwk]

Re: How do I mount a Burris fast fire to lwrc repr

daniel defense mount works well and mounts on the side rail. depends on what railspace you have

 

[adam1122]

Re: How do I mount a Burris fast fire to lwrc repr

I went with the Burkett mount...actually spoke with Matt himself. Luckily, I got my order in because he mentioned they are expected a spec ops order of a couple hundred units....that outta back these guys up in production time some.

I hoep this mount is ass sweet as it looks and everybody says it is.

 

[300WSM]

Re: How do I mount a Burris fast fire to lwrc repr

+1

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sobrbiker883</div><div class="ubbcode-body">Lots of folks like them up close, but I like them out on the forend, so I can "box" the target with the MRD, then either fire when centered or actually focus on the dot if a more precise point is needed.

The former is a reason I really like the Burkett mount, as it is at 1:00 in relation to the bore, so if I have a good cheekweld, and roll the rifle my alignment with the sight won't change.

I'm not a fan of MRD's mounted to scope tubes and such, because the cheekweld is different, therefore aiming is not as intuitive (for me). </div></div>

 

[B.S.]

Re: How do I mount a Burris fast fire to lwrc repr

I see you already have a mount but for anyone else this is an option I went with.

 

[adam1122]

Re: How do I mount a Burris fast fire to lwrc repr

Now that is what I would have really liked to do....that is a totally kick ass set up. Unfortunately my USO sn-3 scope doesn't have enough space to mount it up on top....at least I dont think it does.

I getbmy scope back from USO to or row am and then it's off to get mounted and zeroed. USO only had my scope for 4 days and they did all this to it
1 . Factory rezeroed and changed reticles
2 . Replaced rheostat
3 . Added parallax adjustment

Very Impressive turnaround. Becky rocks...thanks folks!

 

[dbateman]

Re: How do I mount a Burris fast fire to lwrc repr

WTF is this ???

Just dial the mag down and rock that if you need to , am I missing something?

 

[J-Ham]

Re: How do I mount a Burris fast fire to lwrc repr

Yeah dbateman, you are missing something. It's one more useless accessory that you can waste your money on instead of buying more ammo & getting a little more range time. When all the other ninjas see this on my rifle, they will know I'm a real "operator".

 

[B.S.]

Re: How do I mount a Burris fast fire to lwrc repr

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: J-Ham</div><div class="ubbcode-body">Yeah dbateman, you are missing something. It's one more useless accessory that you can waste your money on instead of buying more ammo & getting a little more range time. When all the other ninjas see this on my rifle, they will know I'm a real "operator". </div></div>

Yeah? You're saying Jerry Miculek puts a J-point on his rifle to show everyone he's a real operator? LoL!

http://www.bang-inc.com/store/index.php?main_page=page_2

 

[J-Ham]

Re: How do I mount a Burris fast fire to lwrc repr

No, I'm saying my guess is that 99% of them never get used, they just look cool (Jerry Miculek excluded)

.