If you didint wanna brake the Bank on a Chassis or stock...

[SilentVapor631]

If you didn't wanna break the bank on a Chassis witch one would you choose ?

If you didn't like a chassis what Stock system would you use ?

Over all this is going to help me limit down my over all idea for a Rifle with TL3 Action by Zermatt arms..

Way to many choices on the market with not enough hands on experience with greater success hopefully this will help.. Thank you

 

[JC0352]

What is your budget and intended use? Define “break the bank”. Not everyone’s bank breaks the same, lol.

 

[SilentVapor631]

1,000 or under
Do weighted chassis make a difference?

 

[JC0352]

1,000 or under
Do weighted chassis make a difference?

There should be plenty of options from MDT, XLR and MDT in that price range. Couldn’t answer you’re question as I have no 1st hand experience yet. I like stocks and haven’t jumped in with weights or arca rails yet.

 

[SilentVapor631]

Personal, I like stocks as well !!! Looking at a few but nothing price worth of liking only if you spend over a grand...

 

[PinesAndProjectiles]

Peruse the PX. Lots of stuff available over there.

And if you buy used and you don't like it, unless you got royally fucked, you can sell it and not lose your ass.

 

[BuildingConceptsllc]

I wouldn't call $1000 a chassis that "doesn't break the bank for most" . I know the high rollers in here have that in their couch cushion but, the Oryx chassis is a really good option for $400.00 new I think.

 

[Newbie2020]

ya. Lots of nice options in the $700-1,000 range and more good ones in the $400 range. PX best start.

 

[SilentVapor631]

Tactical stocks is what I started to look into !!! Know of any good ones ?

 

[308pirate]

1,000 or under

Whiskey-3 Competition – Kinetic Research Group

kineticresearchgroup.com

Done

 

[JC0352]

Personal, I like stocks as well !!! Looking at a few but nothing price worth of liking only if you spend over a grand...

Well you can get a Manners for less than that but then you need a trigger guard and have it bedded and you’ll be close to or over $1000, or get one with a mini-chassis in it. I used to have an EH1-A with a mini chassis and I think it was about $1100 new.

You’ll be hard pressed to find a stock with the adjustability of an equally priced chassis. Do you know what your LOP needs to be, so you can get square behind the rifle? Something to consider if you choose a stock without a spacer kit...

 

[Matt_3479]

For an option that doesn’t break the bank, I’d go krg bravo 100%!

For something under 1000 the mdt acc is sweet! Love the whiskey 3 as well but believe it’s a bit more.

If it was a stock I’d look at a used manners. Tough to beat a manners

 

[kcrippen]

I agree on the KRG Bravo, is a good choice for the price.

 

[SourGrapes]

I recently went with a XLR element for a 22lr and have been liking it. Similar feel to the Xlr envy and you have the options of adding weight as you feel necessary. Pretty affordable and with most of this stuff it’s easy to sell if it’s not for you.

 

[jolofree]

I have been a stock guy for years, McMillan, Manners, etc, I didn't like the look, feel or idea of a chassis.
I reluctantly took a KRG Whiskey 3 folder in on trade about a year ago.
Now it is my favorite setup and my first choice go to rifle.
My scores went up abt 25% and still improving.
And a Big shout out to the guys at KRG, they have Great customer service A+

 

[TACC]

I bought a MDT ORYX for my first one, like $400+ another $70 for z couple more mags. Fir the little competition shooting i do it is great.

 

[SilentVapor631]

Thanks you guys... I'm going to take a look at some great prices point items an go from there..

 

[Shootin Stuff]

Chassis = MDT Oryx
Stock = KRG Bravo

 

[Raffy]

If you wanting to stay in the tactical stock realm I would look in to ag composites. They offer a solid selection of different types of carbon fiber stocks. Ive never seen a bad word about them and depending on your options you will stay under a grand, but then there's bedding, bottom metal options if you wanted to go that way. Bedding it yourself is always an option, but I personally wouldn't use a 1000 dollar stock as my first try...

 

[fdkay]

First, you need to know what action.
For example, the 700 action and its clones have a plethora of options available.
KRG Bravo, and X Ray are good choices, around the same price as the x ray is the Oryx.
Bell and Carlson makes some pretty nice stocks, but you'll have to add a DBM, which brings the cost up.
XLR has different levels of chassis available to fit different budgets.
Magpul has the Hunter stock, not really a chassis, but by all accounts a really decent option for a cash strapped beginner, the 700 PRO is a full fledged competition ready chassis available for just under a grand.
Other actions are going to likely have fewer options, but many still available.

 

[JMGlasgow]

Grayboe

 

[mattr25]

I have a Manners T4a and I really like it. I bedded it myself and it shoots as well as I do! I’ve had it a couple years and I believe it was $650ish and there was a 2 month wait on it. I wish I’d have gotten the mini chassis but I believe it’s a good bit more expensive. I’ve only shot 1 full chassis setup and it was nice. I think I just like the look of a stock better. With the DBM you’ll be around $1k.

 

[SilentVapor631]

I have a Manners T4a and I really like it. I bedded it myself and it shoots as well as I do! I’ve had it a couple years and I believe it was $650ish and there was a 2 month wait on it. I wish I’d have gotten the mini chassis but I believe it’s a good bit more expensive. I’ve only shot 1 full chassis setup and it was nice. I think I just like the look of a stock better. With the DBM you’ll be around $1k.

Manner seems to be a favorite...

Whats the difference on a mini ? The actual action ?

This is going to be paired with a TL3

 

[JC0352]

Whats the difference on a mini ? The actual action ?

There is a little chassis inside the stock where the action would normally be bedded.

MCS Comp, BDL and DBM Mini Chassis

mannersstocks.com

 

[sleeplz]

Go to a match and fingerbang some setups. Nothing beats getting your hands on the product.

 

[Aqua Mark]

Hard to beat a battle-proven McRee, in the $600's on sale.

https://shop.mcreesprecision.net/Rem-700-Short-Action-Systems_c535.htm

 

[acudaowner]

https://wooxstore.com/products/chassis-furiosa
at 899 + shipping that's not to bad a price I did not think so . good luck which or what ever you decide to get hope it works out for you . another option you could make your own other people have done it so you could as well just another option .

 

[sneakyman]

The Accurate Rifle Systems prs rimfire chassis is only $500 and super nice! Great customer service!

 

[kthomas]

Whiskey-3 Competition – Kinetic Research Group

kineticresearchgroup.com

Done

This.

If you want to save even more money, then KRG Bravo.