Night Vision izlid 100p accessories

[codyb]

Any of you fellas have a line on a clamp mount and pressure switch for one of these (the AA alkaline battery model)?

If not any experience with moding another brand of pressure switch to use with it?

As of now I carry it on a laynard and use it as my illuminator, but I would like to mount it and try it if anyone has experience there feel free to comment as well.

 

[shooter6.5]

Re: izlid 100p accessories

http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2195904#Post2195904


Lotta useful info in this thread and a num,ber of folks there that might be able to give good info.

In the Stan

 

[codyb]

Re: izlid 100p accessories

Thanks

Read that one a few times, which is why I am now looking for said pieces.

 

[codyb]

Re: izlid 100p accessories

I have considered using a flashlight mount as an option. Nothing I have found has bushings or adjustments that will accommodate the IZILD size.

Looking like I may have to fabricate my own.

 

[codyb]

Re: izlid 100p accessories

I had considered the tape or rubber wrap as an option the AA battery model measures .710", so it would not require much filler. I was however hoping to find something that will remain more consistent over the years.

 

[One-Eyed Jack]

Re: izlid 100p accessories

Yes, the LaRue flashlight mount works with either IZLID (AA battery or C123A battery), just use the appropriate ring.

The pressure switches are unobtainium used or from BE Meyers, as far as I can tell. In one thread, IR-V mentions the TX supplier of the switch assemblies to BE Meyers, but I've not contacted them myself.

Good luck though and brag about your success if you find what you need.

 

[codyb]

Re: izlid 100p accessories

Thanks for the direction fellas. LaRue was one of the first places I looked, not sure how I missed it obviously my googlefu is weak.

I may still try and fab one if the laRue is not as stable as I hope.

 

[shooter6.5]

Re: izlid 100p accessories

If you have a question about the Larue gear then call them and tell them what you want. They are very helpful and will guide you in the right direction, however IR-V has explained it as well as can be. I have and continue to use a lot of their gear to include the flashlight mounts he mentiuoned and they are top quality.

 

[One-Eyed Jack]

Re: izlid 100p accessories

There won't be a stability problem with the LaRue and IZLID.

 

[karux408]

Re: izlid 100p accessories

thanks for the LT707-4 0.760 tip. i received the mount, and the mount does fit the 100p-AAversion (as mentioned in this thread).