JP Enterprises Silent Captured Springs?

I run them in a number of AR 15s, an AR308 and a 9mm PCC - They have been awesome in all of them. You can get weights and springs to tailor your system but the basic version works nice, cycles about like a sprinco blue spring IIRC. (Note sprinco springs are awesome too though - I run them with miltec heavy grease and they are pretty quiet - you can't use the JP springs with a LAW folding stock adapter)
Cheers,
-Chris
 
I run them in a number of AR 15s, an AR308 and a 9mm PCC - They have been awesome in all of them. You can get weights and springs to tailor your system but the basic version works nice, cycles about like a sprinco blue spring IIRC. (Note sprinco springs are awesome too though - I run them with miltec heavy grease and they are pretty quiet - you can't use the JP springs with a LAW folding stock adapter)
Cheers,
-Chris

Ask and you shall receive https://www.jprifles.com/buy.php?item=JPSCS2-15-LAW
 
I have been shooting silent capture springs for about 6 years in precision gas guns. I think I have 8 of them now. PCC, SBR, .223, 6 Cr, and .308. You may have trouble going back to springs after you get one.
If you call them you can use this code:
JP Enterprises Coupon code: 43SS1015
5% off major builds
10% off accessories.
Just ordered an SCS H2 to go with a suppressed SBR and used your code. Thank you!
 
Last edited:
Does anyone use the H2 with the FMOS for a small frame 223/5.56 rifle? I was originally thinking I might try a suppressor and ordered my CTR with the H2, but not sure I will end up getting one. I’m sure it will be fine without a suppressor too.
 
:unsure:So here are my thoughts due my research ... I'm NOT shooting Suppressed .. I do NOT have an adjustable gas block ... just a average Joe that likes shooting ... My conclusion is this .... IF running a can .. IF using an adjustable gas block ... THEN YES .. the JP is the way to go .... "HOWEVER" ... for me Armaspec Stealth Recoil Spring & Multiple Buffer Weights will be PERFECT for me and my set up ... AND ... half the price .... I just bought ( 3 ) ARM SCS for the price of (1) JP SCS ... So my information is my humble report based on my needs, setup and price points ... I hope this helps .... because ... I'm sure I'm NOT the only one that is / was GR8TLY confused as to what SCS to purchase .. Be safe ... Be Well ... :unsure: ... Let's Go Brandon ... I support Ukraine
 
:unsure:So here are my thoughts due my research ... I'm NOT shooting Suppressed .. I do NOT have an adjustable gas block ... just a average Joe that likes shooting ... My conclusion is this .... IF running a can .. IF using an adjustable gas block ... THEN YES .. the JP is the way to go .... "HOWEVER" ... for me Armaspec Stealth Recoil Spring & Multiple Buffer Weights will be PERFECT for me and my set up ... AND ... half the price .... I just bought ( 3 ) ARM SCS for the price of (1) JP SCS ... So my information is my humble report based on my needs, setup and price points ... I hope this helps .... because ... I'm sure I'm NOT the only one that is / was GR8TLY confused as to what SCS to purchase .. Be safe ... Be Well ... :unsure: ... Let's Go Brandon ... I support Ukraine
Only because I think the price is too high, I wouldn't run a SCS with a non adjustable gas block. There would be too much jacking around to get it to work and you'd be left with entirely too much extra stuff that would end up in a drawer.
 
I was reading through some old posts and saw this one. Good info. Figured I would bring it to the top. I have JP SCS’s in all my rifles as well.

If you’re looking to pickup a JP Silent Captured Spring or a complete rifle - code: RickyBobby24 will save you 10% on parts and 5% on complete rifles at JP Rifles.

Any questions about JP products, please let me know.