Which is better to use, the MV from my Magnetospeed Chrono or using the MV calculated from bullet drop on the kestrel? I also have a Gamma Chrno master as a backup to the Magnetospeed..
Kestrel 4500 help
- Thread starter 300 jarret
- Start date
Magneto speed
if you have two put one down range and shoot through both for a better number and BC
if you have two put one down range and shoot through both for a better number and BC
I use the Magneto Speed to get my MV when developing a new load. That gives me a number to put into a ballistics calculator, that gets me close. After that, I shoot on paper at 900 yards (it's what I have available) and adjust elevation until POI is correct. I then go back and change the MV number in my ballistics calculator until it gives me the elevation that matches my scope setting.
I know Frank mentioned changing BC, but I've just never done it that way. Lots of people do.
I know Frank mentioned changing BC, but I've just never done it that way. Lots of people do.
Similar threads
