Kestrel 5700 Elite Target Card Wind Inputs

[mojavejim]

Trying to get my 5700, HUD & BDX3000's to steamline my firing solutions. Have everything working together fine but can't figure out why I can't get the Kestrel Capture all wind function to work. It only will put wind into Target #1. Had same issue with DOF until 1.41 update. Just updated to 1.42 and it still doesn't work. I'm going into "Target Card" then "Wind Inputs" then "All Tgt Wnd' capt. And it only puts the wind into Target 1. Please help, I'm thinking I must be missing something and really need to get it figured out for Team Safari coming up. Thanks for any & all useful info.

 

[AnimalMother224]

following bc im assuming ill be having a similar issue...

 

[Kestrel Ballistics]

Check your Environment setting and the last one is Wcap, be sure it too is set to All Tgts.

 

[mojavejim]

What specific environment setting do I need to check or change? Definitely have it set to capture all in the target card section.
I'm wanting to approach a target area and set DOF then All Wind . Then I can scroll down to each target and range. Everything is working out but for the Capture All Wind.

Check your Environment setting and the last one is Wcap, be sure it too is set to All Tgts.

 

[Kestrel Ballistics]

There is another setting needed, go to the Environment Menu (3 click down from main menu) Press enter and go to the bottom of the menu and make sure Wcap is set to All Tgts not to 1 Tgt.

 

[mojavejim]

That did the trick, I hadn't seen that feature. Thank you for your time & support.