New- Lantac Razorback LT G17 Gen 1-3 Slide
Mounted on frame but never fired. Swapped Trijicon sights to OEM Glock Tritium Night Sights using a professional sight tool
Machined from pre-hardened (H900 condition) 17-4PH (Precipitation Hargened) stainless steel, bead blasted to create a satin surface finish and then PVD (Physical Vapor Deposition) coated with DLC (Diamond Like Carbon) for a superior protective coating.
The Me-DLC coating used has an extremely smooth surface co-efficient of 0.1 and micro hardness of 1000-2000HV (Vickers Hardness) and is chemically inert, it has been shown to prolong part lifespan by upwards of 10 times normal service life.
LANTAC GFP-E™lightened firing pin and 4.5lb striker spring,
LANTAC ESP-S™ ultra smooth safety plunger and reduced power spring,
LANTAC 17-4 Stainless billet extractor and high quality Glock small parts.
Manufactured in the USA.
New- Lantac NINE theaded barrel in stainless
Mounted in slide but never fired
Our Match Grade barrels are precision machined from Certified pre hardened DFARS compliant 416R chromium gun barrel quality stainless steel, to extremely tight tolerances and exacting details.
Lantacs machining and production process delivers an ultra-precise barrel with tightened slide fit & lock up for improved accuracy.
Our barrels are 6 groove, cut rifled, 1:10 Twist Right Hand, fully inspected, double honed (rough and finish) to produce a bore with a Max Roughness Average (RA) of 12.
Chambers are Match Grade SAAMI specification, precision cut and polished to a maximum Roughness Average (RA) of 16.
The pre hardened 416R stainless steel is stress relieved to a proprietary recipe after rifling and final hardness is 38-42 Rockwell C before final shaping and profiling work is done.
Final dimension are held to a +/- 0.0002" deviation for maximum consistency , accuracy and quality.
I have $1,110 in this combo, all like new in original packaging. Will take $950 shipped for the pair- CONUS.
PP gift, money order, cashiers check
Frame and light are not included and are pictured only for representation.
Mounted on frame but never fired. Swapped Trijicon sights to OEM Glock Tritium Night Sights using a professional sight tool
Machined from pre-hardened (H900 condition) 17-4PH (Precipitation Hargened) stainless steel, bead blasted to create a satin surface finish and then PVD (Physical Vapor Deposition) coated with DLC (Diamond Like Carbon) for a superior protective coating.
The Me-DLC coating used has an extremely smooth surface co-efficient of 0.1 and micro hardness of 1000-2000HV (Vickers Hardness) and is chemically inert, it has been shown to prolong part lifespan by upwards of 10 times normal service life.
LANTAC GFP-E™lightened firing pin and 4.5lb striker spring,
LANTAC ESP-S™ ultra smooth safety plunger and reduced power spring,
LANTAC 17-4 Stainless billet extractor and high quality Glock small parts.
Manufactured in the USA.
New- Lantac NINE theaded barrel in stainless
Mounted in slide but never fired
Our Match Grade barrels are precision machined from Certified pre hardened DFARS compliant 416R chromium gun barrel quality stainless steel, to extremely tight tolerances and exacting details.
Lantacs machining and production process delivers an ultra-precise barrel with tightened slide fit & lock up for improved accuracy.
Our barrels are 6 groove, cut rifled, 1:10 Twist Right Hand, fully inspected, double honed (rough and finish) to produce a bore with a Max Roughness Average (RA) of 12.
Chambers are Match Grade SAAMI specification, precision cut and polished to a maximum Roughness Average (RA) of 16.
The pre hardened 416R stainless steel is stress relieved to a proprietary recipe after rifling and final hardness is 38-42 Rockwell C before final shaping and profiling work is done.
Final dimension are held to a +/- 0.0002" deviation for maximum consistency , accuracy and quality.
I have $1,110 in this combo, all like new in original packaging. Will take $950 shipped for the pair- CONUS.
PP gift, money order, cashiers check
Frame and light are not included and are pictured only for representation.
Last edited:
