Load Opinions?

[Brux]

41.8 will shoot but slow
I hit a flat spot between 42.4 and 42.7 of Varget
43 GRS of Varget shot a nice clover leaf but numbers aren't great so I could try playing with seating depth to close the group up or shoot 43.2 and see what happens.
These are loaded 50 off at a OAL of 2.800. I started there because this rifle shoots FGMM 175's and 168'S under 1/2 MOA.
What's your opinion's?

 

[Newbie2020]

Ignore the flat spot. Pick your charge for your desired mv. Then tune seating depth for that bullet and charge weight to decrease group size.

 

[rweaver00geo]

not sure what brass your using but with winchester I use 44 grains of 4064 and 45 grains of varget seated at 2.820. So maybe try a little higher. Also you must have a longer barrel than I do (20") because my 4064 load shoots around 2660 and my barget load is 2650

 

[Brux]

Using Lapua brass and 24 inch barrel.
LabRadar for chrono