Long Range Arms Send It MV3 w/ S90 & MPA BA mount?

[Cobiwan]

I've seen Phil Cashin from MPA show different accessories generally made to go with a Spuhr mount that can also mount on to the side of a MPA BA scope mount like Data card holders and flip out levels, etc. I was wondering if anyone knows if the Long Range Arms Send It MV3 with S90 bracket can mount on to the MPA mount like it does the Spuhr mounts? I know they use the same size screws, just curious if anyone has tried this set up and if it works, has its faults/doesn't seat right, or just doesn't work at all.
TIA!

 

[MDof2]

Do you know the spacing on the mini pic rail from Spurh? (or the S90 bracket from LRA) The MPA holes are ~.780" center to center. I wonder if the two are interchangeable.

 

[MDof2]

Per MPA their spacing is 20mm

MPA BA Bolt Action Mount - MasterPiece Arms, Inc.

MPA BA Bolt Action Mount – 30mm, 34mm, 35mm & 36mm MPA produces one of the most popular mounts in the PRS. Used by the best shooters in the country, our BA Mounts have hosted the optics of shooters winning multiple PRS, NRL and F-class local and national championship matches. The BA Series...

masterpiecearms.com

 

[Cobiwan]

Both the Hawk Hill data card holder and the Flat Line Ops level work on both the Spuhr and the MPA mounts, I would then assume the LRA S90 bracket would work also. I just don't know the spacing on the Spuhr mount.

 

[Ntv69]

I've seen Phil Cashin from MPA show different accessories generally made to go with a Spuhr mount that can also mount on to the side of a MPA BA scope mount like Data card holders and flip out levels, etc. I was wondering if anyone knows if the Long Range Arms Send It MV3 with S90 bracket can mount on to the MPA mount like it does the Spuhr mounts? I know they use the same size screws, just curious if anyone has tried this set up and if it works, has its faults/doesn't seat right, or just doesn't work at all.
TIA!

Did you ever get it to work?

 

[stevieb92]

I'm bringing up an old thread, but I'm searching for a mount for the LRA Sendit MV3 level to my MPA BA one piece scope mounts. Has anyone found a solution?

 

[rimfired]

I'm bringing up an old thread, but I'm searching for a mount for the LRA Sendit MV3 level to my MPA BA one piece scope mounts. Has anyone found a solution?

I can confirm that it works on the MPA BA one piece scope mount, just added to mine over the weekend.

 

[Irokcrawl]

I can confirm that it works on the MPA BA one piece scope mount, just added to mine over the weekend.

Do have a picture of this by chance?

 

[stevieb92]

Do have a picture of this by chance?

Here's a pic that should help.

 

[Irokcrawl]

Here's a pic that should help.

View attachment 8438546

Thanks!. I have 6 MPA mounts. Half are old school and half are the newer models and I just realized the new models had those holes. This definitely makes life easier for the sendit level and data card!