looking for dope in mils out to 2-300 yds for .22

[Mag 300]

Just set up a new 5x25x56 scope on an Anschutz with a fortner action. I cannot get to a 2-300 yd range right now but if you have any dope for the ,22 I would appreciate it
what I need is
what distance did you zero 25 yds 50 yds etc
what ammo did you use 1040 or 1200 fps
what were the mil changes needed at what ever distances you have

Thanks
Bill

 

[AlabamaShooter]

Re: looking for dope in mils out to 2-300 yds for .22

Here is what I have from my 40X using Wolf Match ammo 1040fps, 28" bbl

Zero - 100yds
5.6 mil - 200yds
6.3 mil - 224yds
12.7 mil - 300yds
18.9 mil - 400 yds

hope this gets you in the ballpark

AS

 

[Mag 300]

Re: looking for dope in mils out to 2-300 yds for .22

Thank you for the information and I just have 1 question.
I do want to have a 100 yd zero would have any idea what the bullet is at 25 yds for a 100 yd zero?
say 4" low to target at 25 gets to zero at 100 yds?
Thanks again it was a great help

Bill

 

[clayne_b]

Re: looking for dope in mils out to 2-300 yds for .22

Here is mine, using CCI standard velocity

 

[EscapeVelocity]

Re: looking for dope in mils out to 2-300 yds for .22

I'm glad I stumbled on t this thread. Good reference / data guys.

 

[BenY 2013]

Re: looking for dope in mils out to 2-300 yds for .22

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: clayne_b</div><div class="ubbcode-body">Here is mine, using CCI standard velocity

</div></div>

Is this on your CZ with the SS scope? If so is this data sheet with a 25moa base on the rifle? Thank you!

 

[Mag 300]

Re: looking for dope in mils out to 2-300 yds for .22

Exactly what I was looking for !!

Thanks
Bill


<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: clayne_b</div><div class="ubbcode-body">Here is mine, using CCI standard velocity

</div></div>

 

[BoilerUP]

Re: looking for dope in mils out to 2-300 yds for .22

Savage FV-SR, Weaver 3-10x40 mil/mil, 20moa Burris inserts
Federal Automatch, 1225fps across chronograph, 500' ASL

50yd: 0.0"
100yd: 1.6 mil
200yd: 6.2 mil
300yd: 11.9 mil (literally no elevation adjustment remaining)

200yd is fairly easy on an 8" round plate, 300yd is EXTREMELY difficult.

 

[Tempest 455]

Re: looking for dope in mils out to 2-300 yds for .22

I use 1235 fps velocity .22 ammo for 330 yards. Some will disagree but I've had better results than with it than subsonic at long distances. Below is 5 shots on a 10" target at 330 yards. Typo on the target. It's not Green Tag but Blazer.

Shooting much past 200 yards (acurately with a .22) requires very little if no wind at all.

 

[clayne_b]

Re: looking for dope in mils out to 2-300 yds for .22

This one?

It is a 0 MOA rail, Sure wish the 25 moa rail was in stock when I bought mine. If I want to shoot much past 350, I put my variable gantry mount on.

 

[jdsuper]

Re: looking for dope in mils out to 2-300 yds for .22

Here's mine using Wolf MT @ 1050fps with a 50yd zero

YDS
30 +.2
50 0
70 +.7
100 +2.1
120 +3.1
140 +4.2
160 +5.4
180 +6.6
200 +7.9
220 +9.2
240 +10.6
260 +12.0
280 +13.5
300 +15.0

 

[BenY 2013]

Re: looking for dope in mils out to 2-300 yds for .22

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: clayne_b</div><div class="ubbcode-body">This one?

It is a 0 MOA rail, Sure wish the 25 moa rail was in stock when I bought mine. If I want to shoot much past 350, I put my variable gantry mount on.

</div></div>

Yes sir that is the one I was looking at, thank you!