Anyone know the true specs on these guns? Are they sub moa rifles? Anyone have one dialed in and can recommend a good round? Etc...
-
Having trouble using the site?
Contact support
Lwrc repr
- Thread starter beb0541
- Start date
"true" is going to be hard to find on the internet. I have personally used two and both were sub moa with FGMM.
I have a 20" REPR and really enjoy it. With factory match ammo it is sub MOA, but it is not a ragged hole gun. I've got some .6 and .7 MOA groups, but most fall in the 1.0-0.75 MOA. As far as loads, I have found good luck with both 168 and 175 SMK's and for factory, it loves the Federal GMM and M118LR.
I have a 16" with a Suppressor on it and it is also about .75 MOA with my hand loads. 175 SMK with 42.1 grains of RL15 with CCI BR2 primers in LC brass. FGMM 168's do real close to the same results too.
I was torn between the LWRC and DPMS REPR. The LWRC is a butter smooth rifle out of the box very fine piece of machinery. Also love the charging handle. If you have the cash I would say get it!!! Also agree that for factory loads you can't beat GMM and M118LR
FWIW: I went with the DPMS. The 3950 price tag was just too much to swallow. The dpms, leupold 1-25x zoom illuminated tmr scope, Geissele trigger, and 200 rounds of GMM put me at the cost of just a base LWRC rifle. Thing shoots amazing and if you haven't looked at it before I would say give it a peak.
FWIW: I went with the DPMS. The 3950 price tag was just too much to swallow. The dpms, leupold 1-25x zoom illuminated tmr scope, Geissele trigger, and 200 rounds of GMM put me at the cost of just a base LWRC rifle. Thing shoots amazing and if you haven't looked at it before I would say give it a peak.
Last edited:
Lwrc repr
I love mine. 20" with a trijicon accupoint. Flawless shooter but it is really heavy. It's fine for what I use it for anyways. I use LCLR brass, 41gr varget, br2 primers, 175gr smk and 2.800 coal. If you use commercial brass, you'll need more powder because of thinner case walls.
I love mine. 20" with a trijicon accupoint. Flawless shooter but it is really heavy. It's fine for what I use it for anyways. I use LCLR brass, 41gr varget, br2 primers, 175gr smk and 2.800 coal. If you use commercial brass, you'll need more powder because of thinner case walls.
Similar threads
