Magneto Speed Sporter Mod?

[treetrimmer_01]

Has anyone done any mods to a Magneto Speed Sporter to work with suppressors? Thanks

 

[Sheldon N]

Pull the rubber pad off, strap it to suppressor directly, turn up the sensitivity. Don't shoot enough rounds to get the suppressor hot and melt the thing. Has worked for me the couple times I've tried it.

 

[DrainTheSwamp]

Pull the rubber pad off, strap it to suppressor directly, turn up the sensitivity. Don't shoot enough rounds to get the suppressor hot and melt the thing. Has worked for me the couple times I've tried it.

What caliber did you do this with?
Interested with doing this with a sporter once the tbac is outa jail.

 

[Sheldon N]

I did it with a 308, I think I also did it with my 6 Dasher, both with a Sico Omego. Found that velocity was the same with or without so haven't messed with it much in the last year.

 

[treetrimmer_01]

Awesome thanks. I'm definitely gonna give it a go.

 

[pineoak]

Pull the rubber pad off, strap it to suppressor directly, turn up the sensitivity. Don't shoot enough rounds to get the suppressor hot and melt the thing. Has worked for me the couple times I've tried it.

This has worked for me. Sensitivity "Hi 2"

3 shots MAX in standard .308 in any string... then I remove the unit from the can to keep from melting the plastic.

Always return unit to same position for consistency.

 

[oso1]

I cut a V notch out of the bayonet so it would sit closer to the bore line, works very good, able to a rubber spacer as intended.. Also kept the piece I cut out as a spacer.

 

[paulrem308]

Can it be used with one of the off barrel mount?

 

[Snafu_again]

Yup, works with the Wiser mount. That's what I use...