- Nov 3, 2010
- 10,521
- 23,047
Figured I’d give one these JP flat top mounts a go. Looks nice, will see how it holds up. Got it mounted and ready to re zero
Mail call Monday?
- Thread starter Austinjunks
- Start date
Remage .45 smokeless muzzleloader barrel from Arrowhead rifles. 300 grain XLD NSR bullets. I'm really curious to try this thing out. Should get to it in a couple of weeks.
That's a good looking barrel. What kind of muzzle loader is it going on?
New snack pack, modular evolution tall legs and some stickers for my team!
- Nov 3, 2010
- 10,521
- 23,047
Got these yesterday but was busy prepping for the hurricane to come. Picked up 2100 55gn projectiles for some 223 plinking
Got my scope back from warranty work today which was pretty awesome. 2.5 week turn around including shipping which is amazing! Looking forward to getting home and getting it mounted in its new mount.
Edit: Here she is, in all her glory.
Edit: Here she is, in all her glory.
Last edited:
Just got off work this am to some goodness!
Cole Tac tricorne bag
Awesome GIJoe patches
Reactor USA Fusion Module
Microtech siphon 2
Also, ground up some Kopi Luwak for the first time today, great coffee.
ETA: I always ask new companies to "draw me a picture", some do, most don't. The awesome folks at Reactor did not, they did however give me a custom banner for my app!
Cole Tac tricorne bag
Awesome GIJoe patches
Reactor USA Fusion Module
Microtech siphon 2
Also, ground up some Kopi Luwak for the first time today, great coffee.
ETA: I always ask new companies to "draw me a picture", some do, most don't. The awesome folks at Reactor did not, they did however give me a custom banner for my app!
Last edited:
Mailman played nice this week. A Glock 44 (.22LR G19 clone..same holster etc. to train students) with extra threaded barrel, GG&G's EOTech XPS series lens cover which is fitted inside the aluminum hood roll cage (rear cover spring loaded release, front cover opens @ horizontal for "sunshade" effect) for a KAC SR-30 SBR and recently offered S&W MP9 2.0 Performance Center with Leupold Delta Point Pro optic to mount, rear "tall" sight factory sight is useless with Leupold, replace front sight with Dawson .460" fiberoptic in the mail and although the Leupold mounting plate adapter is adequate the 2.0 Series CORE lengthened the milled out slide to there is a several mm gap which a C&H Precision Weapons mounting plate (in the mail) will be a perfect fitment. and finally replace the factory ported barrel with an Apex hand-fit barrel (in the mail), not for accuracy improvement but not a fan of hot exhaust blowing up about front sight picture even with an optic.
Last edited:
Grayboe stock came in yesterday. I'm really digging this stock
Just ordered & received my C&H Precision Weapons (^^^ BangSquad) Leupold Delta Point Pro adapter plate for S&W M&P9 2.0 Performance Center pistol ..nice kit; it's milled steel v. plastic adapter from Smith & Wesson and 1/3 thickness of Leupold's adapter.
My mail call Monday: Tangent Theta 5-25x purchased from a fellow hide member 
Got lucky and snagged 5 pounds of reloader 26. Now just to figure out what I’m going to load with it.
Just finished. Finnish TAKIV-85 7.62x53R with my own carbon fiber shroud barrel.
5 shots 100 yds, edge to edge so .536-.310= .226 MOA
5 shots 100 yds, edge to edge so .536-.310= .226 MOA
Mailman finally delivered the last of the parts and assembled.
Apex aluminum trigger / Apex 2-dot sear / hand fit barrel non-ported
Dawson 0.460" fiber optic front sight
Leupold Delta Point Pro 2.5 MOA
C&H Precision Weapons System optic adapter plate secured with 3/4" 6-32 torx plus screws (rather than factory hex heads) & 1/8" shrink tubing in optic housing
Adjusted factory over-travel screw
Leupold Adjustable Rear Sight; Removed factory "tall" sights which were way too short
Carver Custom tungsten guide rod 17 # flat wire guide rod recoil spring
Safariland GLS Holster
Apex aluminum trigger / Apex 2-dot sear / hand fit barrel non-ported
Dawson 0.460" fiber optic front sight
Leupold Delta Point Pro 2.5 MOA
C&H Precision Weapons System optic adapter plate secured with 3/4" 6-32 torx plus screws (rather than factory hex heads) & 1/8" shrink tubing in optic housing
Adjusted factory over-travel screw
Leupold Adjustable Rear Sight; Removed factory "tall" sights which were way too short
Carver Custom tungsten guide rod 17 # flat wire guide rod recoil spring
Safariland GLS Holster
Ordered a 2 port brake for my Micro 30 to my hotel for the beater rifle. Hoping Midsouth gets my ammo order out soon, I am excited to see how this can performs on an auto since it is designed for low backpressure. I have been pretty impressed with it on a .308 for its very small size.
Attachments
Got the best phone call you can get this morning. Dealer had my stamp in hand and I could come pick her up finally. 5 months and 2 weeks in total from check cashed to stamp in hand. Thunderbeast Ultra 9 30cal can. Now I’m just waiting on my Area 419 adapter to ship so I can use it lol
That’s a damn good feeling man! Just got a 280 and found 3k fed 215’s on the shelf and then found at least 10 lbs of h4831sc. My buddy found me some fed215m’s up in Wyoming too which is awesome.
A little late to the party considering it is Thursday but I wanted to show off my new Yhm Resonator k i picked up from my dealer this week.
Got my 120rd ammo organizer thing from walsh custom defense today.
How did it work out? I don't currently anneal anything. Might be time to start.
It’s worth every penny. I anneal after every firing.
what caliber do you shoot?
I started reloading in the 70's, around 78 I think.
From 222 to 50 BMG, and everything in between. Even still have some cases going back to that time period. Early 80's for sure. Some cases with close to 10 loadings on them. No annealing.
From 222 to 50 BMG, and everything in between. Even still have some cases going back to that time period. Early 80's for sure. Some cases with close to 10 loadings on them. No annealing.
I got a few Accuracy one shooting item today.
Accuracy One Concentricity Guage.
Accuracy One Precision Primer Gauge
Accuracy One Concentricity Guage.
Accuracy One Precision Primer Gauge
