I’d hunted with my lrh with an arca rail and it was fine to carry, and would have been end better without the arca rail. Running a Hawkins flush hunter mag was key to be able to hold the gun at its balance point.
-
Having trouble using the site?
Contact support
Manners LRH Discussion
- Thread starter smacha538
- Start date
It’s thinner than my previous PRS2 and i carried it quite often. I really don’t think it will be an issue and i have small hands
I'm in for one! My LRH stock has the two sling studs, would these just be removed to fit the arca rail and then utilize the holes for the mini arca rail that's already on there?
On hold with manners, hands down best hold music ever lol Johnny Cash is unrivaled for being on hold
It carry’s fine, didn’t have any complaints, but the feel of the aluminum rail is cold colder then carbon fiber.
No complaints from me. I ordered mine before they released the LA inlet and I knew it was an issue so I bought an Area 419 rail that Manners installed hardware for and I fit the rail to the bottom metal.
No, these will use 3x 1/4-20 fasteners as we wanted something SOLID!
Unfortunately there was A LOT of holding today. Busier than we’ve seen in a long time. It will take a few days to process all these Black Friday orders. Insanity I tell you!
I don’t have any issue with it. I think the shape is a nice compromise with the rounded edges. I like mine and ordered another.
Last edited:
First Rob… why.
Second most of the ones I’ve seen have been inletted for a proof sendero. So maybe not quite m24 thick but still pretty thicc
I wont be home till Christmas but if we don’t have an answer by then I’ll drop my brothers 308 which is a m40 contour in the LRH
There is a PRS shooter running a 1.25” in one.
Since the top of the stock is below the centerline of the barrel it can allow a fatter barrel than other hunter stocks. We list max as m/40 as the other Elite Hunters fall in that but it can take more
I’ve packed a rifle or ten, and killed a elk or ten, by far this stock is the most comfortable stock I’ve shot & packed around the hills of Montana,on top of that shooting a .300wm with a ultra thin recoil pad handles it like none other. I wish I had on other one in LA and two in SA.
Attachments
Last edited:
what action did you go with? Anti? Also what is the weight difference between the 1/2” recoil pad and full fledge decelerator?
ERATAC Adjustable Inclination Mounts
ERATAC - Adjustable Inclination Mounts are in stock, best price, no tax, free shipping - Call (570) 368-3920
I have the anti long action with mini chassis, 24” proof barrel, magpul bottom metal, Tt trigger and Nightforc on top. The stock has the slimmest recoil pad they offer, and not sure it would make a difference in weight that much with the thicker pad. I’m running a .300wm and recoil is manageable, I know everyone’s different.
I have an AG Adjustable hunter RH LA in Carbon Urban Camo color, I’m going to sell when I get my hands on another LRH.
Last edited:
Love the lrh. This is my Altus built 300 Norma. I’m running the Hawkins hunter mags, but the 338 mags don’t sit as flush as the “standard” mags. Not a big issue to be honest, but something for folks shooting the bigger magnums to consider. Also this stock handles recoil very well in my opinion. I’m shooting 230’s, and have never shot anything bigger than a 7ss before this rifle, and I really don’t feel any more perceivable recoil than that rifle which was in a prs 1.
I will confirm that the medium action does not come with a mini-chassis. I was a bit surprised considering is almost standard on the SA LRH. The medium length stock I ordered is ready and is about to ship. I asked for clarification after reading somewhere that the medium is pillars only.
Oh well,I’ve done that more than a time or two.
Oh well,I’ve done that more than a time or two.
M24 Krieger SS barrel in 223 for coyotes and prairie dogs.... and tac matchs now lol
I know its not really the purpose of that rifle but I would like to know what it weighs right there.
Hey, just came across this and wondering if anyone has tried to fit it to the LRH for a full length Arca option that wraps around the bottom metal? Looks like it has a lot of clearance but may still work. It’s from Salmon River Solutions. They make both a full length arca and arca/pic combo.
Attachments
The only thing I didnt like about my LRH was the cheekpiece. I know its there to save weight but its so flimsy and thin I would have liked them to have a loggerhead setup or something to not only be more stable, but easier to take off when cleaning the gun. The allen key and spacers were kind of a pain to line up to reinstall.
I used the full length Arca rail from SRS on mine. You need to source another fastner from the hardware store to go into where the little choad arca rail was, and one to replace the stud. Mounted up great and used it at NRL hunter match.
Can you post some pictures of this setup? I'm leaning this direction for my LRH, but would like to see how it fits around the bottom metal and just overall fit. Thanks
Manners really hit a home run with this stock. It is by far my most favorite Manners offering.
If I had to pick one thing to change it would be the spacer cheekpiece arrangement. I know it would add weight and possibly weaken the structure of the butt......but I like the oldschool style adjustable cheek hardware. Although a lighter tool-less version of the clamp style would be pretty sweet.
Ern
If I had to pick one thing to change it would be the spacer cheekpiece arrangement. I know it would add weight and possibly weaken the structure of the butt......but I like the oldschool style adjustable cheek hardware. Although a lighter tool-less version of the clamp style would be pretty sweet.
Ern
Hi Ern - I too really like the KMW comb hardware and there is a toolless knob sold by….er, TS Custom maybe. Got on in a HS Precision Rem 700 hunting rig.
My only objection to Manners stocks is the large distance between grip front strap and trigger. I can’t plan a basketball and it seems that all the Manners stock have too much space for my little girl hands.
Given that, do you have a fav stock for people w smaller hands/fingers?
Last edited:
Depending on how far you need it moved, you may get Manners to run the inletting program with a little rearward offset. I am not sure how their programs are setup but it might be a pretty simple process........or not.
Other than that, other small hand comp shooters I have seen just shift their grip hand forward enough to get a 90degree finger......basically getting more of a palm weld instead of a monkey grip.
Ern
Other than that, other small hand comp shooters I have seen just shift their grip hand forward enough to get a 90degree finger......basically getting more of a palm weld instead of a monkey grip.
Ern
Options are good but part of what makes the LRH great is the weight. Happy with the current design. The KMW cheek adds a pound on any stock and I've changed out any stocks with the kmw adjustable cheek on hunting builds.
Similar threads
Accessories
Manners LRH SA with mini chassis
