I would like to introduce the new MCS-T6A stock. This stock is actually a non-folding version of our MCS-TF1 folding stock. It will be offered in two versions a T6 non-adjustable cheek and the T6A with an adjustable cheek. Below is Some of the features of the new T6/A, we should have the web page and stock builder updated in the next week or so. Let me know if you have any questions.
* Fully ambidextrous grip and cheek
* The forend is on the more narrow side with a flat bottom and a width of 1.97”.
* While the sides of the forend are parallel to the bore, the bottom has a taper, which allows for small elevation adjustments by pushing or pulling the rifle when using a front bag or other surface.
* The very top 3.5” from the tip of the forend has a slight flare to accommodate the installation of an imbedded front rail for night vision.
* The vertical pistol grip is designed with a small palm swell on each side for the average size shooter, but we also lengthened it about a ¼” to help accommodate larger hands that have trouble keeping all their fingers on the grip without there little finger falling off the bottom of the grip like on other tactical style stocks.
* It will take up to a 1.30 straight barrel channel
* It will come standard with a full inlet, your choice of a solid painted finish or one of our molded in camo finishes, a fixed 1" decel pad and a set of 9/16" pillars.
* The T6/A can be inletted for both right and left hand actions. It will also accommodate all remington style, Winchester style and savage actions. Along with a few others.
Thank you,
* Fully ambidextrous grip and cheek
* The forend is on the more narrow side with a flat bottom and a width of 1.97”.
* While the sides of the forend are parallel to the bore, the bottom has a taper, which allows for small elevation adjustments by pushing or pulling the rifle when using a front bag or other surface.
* The very top 3.5” from the tip of the forend has a slight flare to accommodate the installation of an imbedded front rail for night vision.
* The vertical pistol grip is designed with a small palm swell on each side for the average size shooter, but we also lengthened it about a ¼” to help accommodate larger hands that have trouble keeping all their fingers on the grip without there little finger falling off the bottom of the grip like on other tactical style stocks.
* It will take up to a 1.30 straight barrel channel
* It will come standard with a full inlet, your choice of a solid painted finish or one of our molded in camo finishes, a fixed 1" decel pad and a set of 9/16" pillars.
* The T6/A can be inletted for both right and left hand actions. It will also accommodate all remington style, Winchester style and savage actions. Along with a few others.
Thank you,