Mc3 stock

[Dakid Gully13B]

So for work I have a Remington 700 build and just ordered a MC3 stock but I want to add a DBM but can’t find anywhere that has the Mc3 dbm. Is there another compatible option like the magpul bottom metal.

 

[ShtrRdy]

What is the bottom of the stock inlet for?

 

[PCR]

What’s the bottom metal inlet on the stock? You may need to have the stock inlet and fit by a gs.
Can’t go wrong with a Badger DBM and some AI mags.

 

[b6graham]

Does Mc3 not have the bottom included anymore?

 

[Dakid Gully13B]

What’s the bottom metal inlet on the stock? You may need to have the stock inlet and fit by a gs.
Can’t go wrong with a Badger DBM and some AI mags.

Yea that is true...I have a bottom metal from magpul coming in and will see...either was I plan on having my gun smith install it. The badger DBM is on the list as well.

 

[Dakid Gully13B]

Does Mc3 not have the bottom included anymore?

They have different versions. The one that comes with it is out of stock and the DBM that the have is also out of stock...unless someone knows where else I can find one

 

[Slagslinger]

I believe it's a m5 inlet so any m5 dbm should fit

 

[Dakid Gully13B]

I believe it's a m5 inlet so any m5 dbm should fit

So that means the magpul one wouldn’t work without a GS

 

[drwood96]

The Mc3 DBM is polymer junk. I swapped it out with a metal Greyboe one. The inlet is a little larger than standard.

 

[Dakid Gully13B]

The Mc3 DBM is polymer junk. I swapped it out with a metal Greyboe one. The inlet is a little larger than standard.

What did you do to install and do you want to sell your Mc3 dbm

 

[Trigger Monkey]

The Magpul DBM isn't going to work with an M5 inlet, even if you have a gunsmith open up the stock so it will drop in. The pillar depths needed for each are different. DBM's that use the M5 inlet pattern usually come with shorter pillars and new action screws so that it puts the magazine at the proper height in relation to the bolt and feed ramp in the action.

The Magpul was designed to drop in to the Magpul stock as a direct replacement for someone that is using a Remington 700 BDL floor plate and action screws without changing anything except removing a spacer. The pillar height for a BDL set up is taller and the action screws longer. If you tried to use the Magpul DBM in a stock that has pillars for a M5 inlet I'd imagine the magazine would bottom out on the action before it could lock in and the action screws would interfere with the bolt.

 

[Dakid Gully13B]

The Magpul DBM isn't going to work with an M5 inlet, even if you have a gunsmith open up the stock so it will drop in. The pillar depths needed for each are different. DBM's that use the M5 inlet pattern usually come with shorter pillars and new action screws so that it puts the magazine at the proper height in relation to the bolt and feed ramp in the action.

The Magpul was designed to drop in to the Magpul stock as a direct replacement for someone that is using a Remington 700 BDL floor plate and action screws without changing anything except removing a spacer. The pillar height for a BDL set up is taller and the action screws longer. If you tried to use the Magpul DBM in a stock that has pillars for a M5 inlet I'd imagine the magazine would bottom out on the action before it could lock in and the action screws would interfere with the bolt.

Got it thanks

 

[drwood96]

What did you do to install and do you want to sell your Mc3 dbm

The Grayboe DBM dropped right in and ran without issue for me. There was just space around the edge. You could bedding it for a better fit.

I sold the stock and DBM early this year as the CF version was heavier then expected but a very solid stock for the price.

 

[AccuSol-ERN]

The Badger DBM is good stuff....... but cost more than the stock you are putting it in. Take a look at Hawkins Precision. They are both the same stock inlet pattern too.

Ern