MDT ACC Chassis

[Birdy161]

In looking at the Anschutz 1782 it likely isn't a footprint that would be supported by and of our current inlets. It would be best to contact Anschutz directly to confirm any compatibility, but I suspect it's going to be to their stock only.

Barrel length becomes a personal preference, you might give up some speed on the top end with a 23" barrel, but it won't be the difference between shooting distance successfully. It's always a plus and minus game; go with what feels best for you.

-Anthony

Thanks very much for that information, I was expecting as much but hopeful none the less.

Would have been nice to have the ACC chassis across all my rifles so I might have to rethink the Anschutz option.

 

[deadly0311]

Thanks very much for that information, I was expecting as much but hopeful none the less.

Would have been nice to have the ACC chassis across all my rifles so I might have to rethink the Anschutz option.

The 1782 isn’t offered by MDT, Nordic Marksman I believe may have been looking at doing it but I’m not sure of their status of that project. Anschutz North America won’t have any for the center fires.

 

[bodhisafa]

Does the ACC chassis allow AW mags to be ran at the appropriate height?

 

[MDT_Josh]

Does the ACC chassis allow AW mags to be ran at the appropriate height?

Yes it does If you need to tweak the height, we do offer +/- latches that you can install to better match the mags up to your action, but on most 2-lug's, this isn't required.

- Josh

 

[bodhisafa]

Yes it does If you need to tweak the height, we do offer +/- latches that you can install to better match the mags up to your action, but on most 2-lug's, this isn't required.

- Josh

With this chassis are most shooters having better luck with 2 lug vs 3 lug actions (when using aw mags)?

 

[Dooby]

Yes it does If you need to tweak the height, we do offer +/- latches that you can install to better match the mags up to your action, but on most 2-lug's, this isn't required.

- Josh

Are the +/- latches on your website? I'm unable to find it.

 

[MDT_Josh]

With this chassis are most shooters having better luck with 2 lug vs 3 lug actions (when using aw mags)?

Typically 2-lug actions have significantly less chance of feeding issues, just due to their design, however, we have quite a few of our pro team shooters (as well as many other shooters worldwide) who have run this chassis out of the box with 3-lug actions!

Are the +/- latches on your website? I'm unable to find it.

They are not unfortunately, you will have to contact customer service to request them through the Customer Service Portal.

- Josh

 

[DisplacedTexan]

With this chassis are most shooters having better luck with 2 lug vs 3 lug actions (when using aw mags)?

For the most part, 3 lugs run AWs with zero issues, whereas 2 lugs don't seem to operate well with them or need a lot of modification to work correctly.

I run the ACC with a GA Tempest, Terminus Zeus, and Vudoo Three60 with only the Tempest needing to be bedded. And HRD mag kits because I run 22BR and 6Dasher.

 

[Skunkworx]

Gen 2 floating around

 

[MDT_OFFICIAL]

Gen 2 floating around

Yup, early prototype. But it's going to be different for us. This will be the first time we will be having Gen 1 and Gen 2 products selling at the same time for the foreseeable future. Plus, Gen 2 is summertime.

-Anthony

 

[spife7980]

Doesnt look like much of a change, some new qd cups up front, a thumb rest maybe...

But that mag well- is this going to be a long/short action 2 in 1 chassis?

edit, yeah and the rider and new butt knobs but those are just slap on parts like the other above. If that can accommodate both short and long mags thats awesome.

 

[akmike47]

Doesnt look like much of a change, some new qd cups up front, a thumb rest maybe...

But that mag well- is this going to be a long/short action 2 in 1 chassis?
View attachment 7752876

Bag rider looks interesting not sure if good or bad, but I get the idea.

 

[MDT_OFFICIAL]

Doesnt look like much of a change, some new qd cups up front, a thumb rest maybe...

But that mag well- is this going to be a long/short action 2 in 1 chassis?


edit, yeah and the rider and new butt knobs but those are just slap on parts like the other above. If that can accommodate both short and long mags thats awesome.

Not the magazine well is longer since it's now going to be fully adjustable and it needs to be able to hold the whole collet assembly. But yea, there are a ton of changes and we will be releasing a detailed list of changes a bit closer to launch to drive the hype train.

-Anthony

 

[bodhisafa]

Is anything being done to reduce the “vibration/ringing” shooters report when shooting this chassis.

 

[Dooby]

Is anything being done to reduce the “vibration/ringing” shooters report when shooting this chassis.

It's not that bad...no ringing, but I'm shooting 6GT.

I also use these:

https://smile.amazon.com/gp/aw/d/B06ZZDMHGX?psc=1&ref=ppx_pop_mob_b_asin_image

Amazon.com

 

[TM6]

The shape of the tip of forearm is different (angled nose) and quite possibly more material for more stiffness for those running no weights as there is some flex there now.

TM6

 

[Skunkworx]

Is anything being done to reduce the “vibration/ringing” shooters report when shooting this chassis.

Some guys have been running vibration dampeners for them. Look at Francis Colon’s stock. He’s got them.

 

[RFutch]

Some guys have been running vibration dampeners for them. Look at Francis Colon’s stock. He’s got them.

But where do you get them? Not on MDT's site.

 

[bodhisafa]

What about a bridge for other devices/hand placement ?

 

[akmike47]

What about a bridge for other devices/hand placement ?

They make that already if you’re talking about the mirage shield, if you mean on the rings they make that too

 

[MDT_OFFICIAL]

But where do you get them? Not on MDT's site.

Coming soon, make sure you are signed up for our newsletter to be kept up to date with all future product launches

What about a bridge for other devices/hand placement ?

We have some new concepts that are being worked on, the current ACC does have the Mirage hood available.

-Anthony

 

[Hennig]

Finished up this pair of ACCs today - a cool combo for sure.

 

[Kometes]

Here's the ACC cut down 3.5" to make it fit a nice 18" Vudoo.

View attachment 7277379

Digging up an old Pic but how'd you go about dealing with the end of the arca rail? Did you just mill/grind it to a slope like the original end?

 

[TACC]

Using this for my first build, lots of great information, experience, thanks.

 

[littlepod]

Digging up an old Pic but how'd you go about dealing with the end of the arca rail? Did you just mill/grind it to a slope like the original end?

Yes. Smoothed it out at the end so it's not sharp.

 

[RFutch]

Anyone know the weight difference between the aluminum buttplate and the steel that comes with the elite stock?

 

[littlepod]

Anyone know the weight difference between the aluminum buttplate and the steel that comes with the elite stock?

About a 1/2 lb. .75lbs for the steel, and .3 lbs for the aluminum

 

[BBLV]

More info on the Gen2 ACC chassis from Shot Show: YouTube Link

Love the meatier front end and adjustable mag well.

 

[MDT_OFFICIAL]

More info on the Gen2 ACC chassis from Shot Show: YouTube Link

Love the meatier front end and adjustable mag well.

Nice, but it's not the Gen 2; this is going to be called the ACC Elite as both versions are going to exist at the same time.

-Anthony

 

[Hennig]

Nice, but it's not the Gen 2; this is going to be called the ACC Elite as both versions are going to exist at the same time.

-Anthony

Did we ever have a confirmed price for the Elite?

 

[MDT_OFFICIAL]

Did we ever have a confirmed price for the Elite?

Not yet, we are too far out to say yet, but once the price is announced we are getting close!

-Anthony

 

[Frank670]

Anyone familiar with dropping a Tikka T3x CTR in a MDT ACC Chassis?

 

[MDT_OFFICIAL]

Anyone familiar with dropping a Tikka T3x CTR in a MDT ACC Chassis?

It just drops in without issue!

-Anthony

 

[MDT_Josh]

Anyone familiar with dropping a Tikka T3x CTR in a MDT ACC Chassis?

You will however not be able to use CTR mags, and will have to switch to using AICS pattern magazines as the mag well geometry is different

- Josh

 

[littlepod]

Anyone familiar with dropping a Tikka T3x CTR in a MDT ACC Chassis?

Yep mine dropped in without issue - and yeh you need the AICS mags. If you want to run the Tikka T1X in it, you just have to remove the mag latch too.

 

[bodhisafa]

Can a shooter run an AW magazine in the ACC chassis?

Does it have some sort of vertical magazine adjustment?

 

[littlepod]

Can a shooter run an AW magazine in the ACC chassis?

Does it have some sort of vertical magazine adjustment?

Yes but you need to ask MDT for a longer latch.

 

[bodhisafa]

Yes but you need to ask MDT for a longer latch.

Can this be ordered separately ?

 

[littlepod]

Can this be ordered separately ?

Yes. Their CS will usually send one to you for free.

 

[MDT_OFFICIAL]

Yes, we have different length latches available, please reach out to us through our support portal.

-Anthony

https://support.mdttac.com/hc/en-us/requests/new

 

[Cornerstonearmory]

I’m confused my ACC runs both with no issues, and I didn’t change out any mag catch

 

[littlepod]

I’m confused my ACC runs both with no issues, and I didn’t change out any mag catch

Depends a bit on what ammo and what action. I can tell you a 3-lug, 6GT requires some pretty fine tuning to get it to run flawlessly with AW mags. A 2-lug, 308 has enough forgiveness to probably just run without any work.

 

[MDT_Josh]

I’m confused my ACC runs both with no issues, and I didn’t change out any mag catch

It's action, magazine and caliber specific. We try to design such that the majority of combinations work without issues, but there will always be outliers in each of those variables!

- Josh

 

[LV Precision]

@MDT_OFFICIAL @MDT_Josh are the buttstock dampeners ever going to be released?

Every ETA comes and goes, with no notice of updated timelines. I've got 5 ACCs that would appreciate them.

 

[MDT_Josh]

@MDT_OFFICIAL @MDT_Josh are the buttstock dampeners ever going to be released?

Every ETA comes and goes, with no notice of updated timelines. I've got 5 ACCs that would appreciate them.

I promise that we're just as frustrated as you guys on these, but I believe that we're close now. We're supposed to be releasing in the next few weeks, but as you've said, deadlines have come and gone and that is unacceptable. All I can tell you for now is that we hope to have them on shelves soon!

- Josh

 

[bodhisafa]

Yes, we have different length latches available, please reach out to us through our support portal.

-Anthony

https://support.mdttac.com/hc/en-us/requests/new

Are different latches available for the XRS chassis as well?

 

[MDT_OFFICIAL]

Are different latches available for the XRS chassis as well?

Yes, we use the same latch for all chassis systems currently.

-Anthony

 

[chanrobi]

Is the MDT acc version compatible with the tikka t3x arctic?

 

[MDT_OFFICIAL]

Is the MDT acc version compatible with the tikka t3x arctic?

Yes.

-Anthony

 

[chanrobi]

Yes.

-Anthony

Thanks, as soon as i get back from this deployment it'll be a t3x in a mdt acc ... !!