MDT Vertical Grip on McRee chassis

[minn_wild1]

I want to try the vertical grip from MDT. https://mdttac.com/us_en/mdt-vertical-grip.html Anyone have experience with this grip on a McRee Chassis (or other similar)? I am hoping it will slide forward enough so i can get my trigger finger in a good position (close as possible to a 90). Hard to buy these things without trying them. I wear a medium to large glove, but have shorter fingers. Any insight would be appreciated.

 

[wade2big]

I have no experience with the chassis but do with the grip. The grip has quite a bit of adjustment forward which should suit you. I don’t have large hands by any means and use the grip almost all the way back on my mdt chassis.

 

[DownhillFromHere]

MDT has a 30-day return policy. Try it; if it doesn't work, you can return it. They're a great company to work with.

 

[minn_wild1]

MDT has a 30-day return policy. Try it; if it doesn't work, you can return it. They're a great company to work with.

I suck at returning things. I need to have a garage sale...

 

[dski]

What were your thoughts with that combo? Would like to do the same.

 

[minn_wild1]

What were your thoughts with that combo? Would like to do the same.

The grip is a little thicker than i would like. It doesn't get my hand far enough forward. I filed down all of the sharp edges on the front of the grip between the split panels. It was annoying to have sharp plastic rubbing on my middle finger. I think i will hit it with the dremel and see what happens. It's better than the grip that came with it. Most likely would work fine for many folks.

 

[Steel head]

Yea
I tuned up my MDT grip as well with a file and sand paper
I do wish it was a bit narrower.
it would be perfect then.

 

[Tunnuh]

I have the exact issue of larger hands with medium finger length. I use the ergo grips TDX-0 on my Mcrees G10. I love that grip

 

[dski]

Are the TDX rubber overmolded?

 

[Tunnuh]

Are the TDX rubber overmolded?

If they are, it's not noticeable to me. Feels more polymer

 

[Tunnuh]

I just grabbed my rifle...maybe some rubber on the bumped texture, but not bad like the other ergo grips

 

[cut2fix]

Tried several grips, had the best luck with Magpul. The MIAD grip (Green chassis) has multiple backstraps to adjust grip thickness and trigger reach. The MOE K grip (FDE chassis)is more vertical and has a shorter reach. You will have to trim the top curved portion of the grip to fit the chassis, but takes about two minutes with a Dremel.

 

[PinesAndProjectiles]

I suck at returning things. I need to have a garage sale...

Let me know when and where!

 

[minn_wild1]

Let me know when and where!
[/QUOTte

A fun shoot and swap meet would be a great idea.