Gunsmithing Modify surgeon to take aw mags
- Thread starter Okiegunner
- Start date
Why not just wait on the new ARC mags to come out? Shouldn't be much longer and they are almost the exact size of the AW's.
I do.
I will be up front about this. About 6 months ago we had one in here for a routine rebarrel. I had a new hire and he neglected to grease the threads on a trial assy. The barrel stuck and resulted in some galling.
Phone calls made and a replacement action was delivered 48 hours later.
So, here sits this one that has a blem. What I've done is run it through the Kitamura to tune the threads back up. It's no longer a 1.0625/16 pitch. -nutshell layman's term its been "M700'd" in the sense that the threads were cleaned up much the same as a Remmy would during accurizing.
So, barrel fitting will have to be done by someone who understands this.
Beyond this issue the action is turn key. No other issues present to my knowledge. I can't say if it was new when we got it or not. I just don't remember and I'm too lazy to look it up. Price is affordable. I won't quote it here as this isn't a FS section. You'll have to call us and ask to speak with me. (Chad) Goes without saying we'll have to do the FFL transfer thing unless you happen to be local, then a 4473 will apply.
Happy to help.
Similar threads
