Rifle Scopes Mounting a NX8 2.5-20x50mm

[Spalding]

What rails/rings/heights are yall using to mount a NX8 2.5-20x50mm?

 

[Conqueror]

It would help if you described your setup. Certain mounting solutions will work on a thin-barreled hunting rifle and not on a rifle with a continuous top picatinny rail, for instance.

 

[White Death]

I used a NF 30mm ultralite unimount. Height 1.375"
No. A191

 

[smoothy8500]

Certain mounting solutions will work on a thin-barreled hunting rifle and not on a rifle with a continuous top picatinny rail.

Meh, just go with "ultra high" and it will fit anything. Besides, we know that lowest scope to bore is over-rated anyways.

 

[Conqueror]

Got it, put everything in a Unity giraffe mount and send it.

 

[newguy2k3v2]

It’ll fit in a Spuhr but you have basically zero room to slide it in the mount to tweak eye relief.

 

[Meuse]

ADM Recon 20 MOA cantilever mount - 18” SPR 5.56

 

[George1776]

What rails/rings/heights are yall using to mount a NX8 2.5-20x50mm?

I’m about to buy the same scope for a 6mm creed with a falcor 7 (20 moa)…my first bolt gun so lots to learn…what did you end up getting?