I'm very interested in buying a MK II FVSR and swapping the stock . I'd like to know if there would be a picatinny adapter for the Boyds Tacticool or any other stock that would allow me to mount my Atlas Bipod. I'm looking for a drop-in solution as there is no decent smith in Yellowknife.
Mounting an Atlas bipod on a Savage MKII FVSR
- Thread starter st1650
- Start date
Re: Mounting an Atlas bipod on a Savage MKII FVSR
Can't think of any stocks that come with a pic rail OTB. A forum member: S1erra1, has an AI chassis coming out soon for the Savage Mark II so you can get a spigot adapter for the Atlas. Apart from that, you'll need to get a picatinny rail installed either by yourself or by a 'smith.
Can't think of any stocks that come with a pic rail OTB. A forum member: S1erra1, has an AI chassis coming out soon for the Savage Mark II so you can get a spigot adapter for the Atlas. Apart from that, you'll need to get a picatinny rail installed either by yourself or by a 'smith.
Re: Mounting an Atlas bipod on a Savage MKII FVSR
I have a Savage FV-SR with a Tacticool stock. I just ordered a Blackhawk "Swivel Stud Picatinny Rail Adaptor" for this exact reason. I will report back when I get the part in hand later this week or next week. Everything I have read is that the adaptor is pretty solid and reliable.
http://www.opticsplanet.net/blackhawk-swivel-stud-picatinny-rail-adapter.html
Be sure to mention that you are a hide member and get 5% off the whole order if you order from Opticsplanet.com
I have a Savage FV-SR with a Tacticool stock. I just ordered a Blackhawk "Swivel Stud Picatinny Rail Adaptor" for this exact reason. I will report back when I get the part in hand later this week or next week. Everything I have read is that the adaptor is pretty solid and reliable.
http://www.opticsplanet.net/blackhawk-swivel-stud-picatinny-rail-adapter.html
Be sure to mention that you are a hide member and get 5% off the whole order if you order from Opticsplanet.com
Re: Mounting an Atlas bipod on a Savage MKII FVSR
Accu-shot (the makers of the Atlas) has rails on their website - http://www.accu-shot.com/catalog/product_info.php?cPath=23&products_id=69 - should fit.
My factory Tacticool had two studs at the front with 2.5" centers. Stocks direct from Boyd's may or may not have the same measurements.
Accu-shot (the makers of the Atlas) has rails on their website - http://www.accu-shot.com/catalog/product_info.php?cPath=23&products_id=69 - should fit.
My factory Tacticool had two studs at the front with 2.5" centers. Stocks direct from Boyd's may or may not have the same measurements.
Re: Mounting an Atlas bipod on a Savage MKII FVSR
I removed the front swivel stud mount and bolted the shortest magpul rail through the hole. I drilled relief holes for the locating tabs, took 10 mins, cost about $5, works brilliantly.
I removed the front swivel stud mount and bolted the shortest magpul rail through the hole. I drilled relief holes for the locating tabs, took 10 mins, cost about $5, works brilliantly.
Re: Mounting an Atlas bipod on a Savage MKII FVSR
I took a file to an old weaver scope base, opened up the slot to accept the cross bolt.
Then used a couple of wood screws to hold the base on the forend.
I took a file to an old weaver scope base, opened up the slot to accept the cross bolt.
Then used a couple of wood screws to hold the base on the forend.
Similar threads
